Unintentionally produced persistent organic pollutants (UPOPs) include polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), dioxin-like polychlorinated biphenyls (dl-PCBs), pentachlorobenzene (PeCBz), and hexachlorobenzene (HxCBz). With the booming of municipal waste incinerators (MWIs) in China, the emission of UPOPs has generated great concern. As an alternative technology of dioxin control, catalytic decomposition has not been used in China, mainly due to the absence of national demonstration projects. Also, the simultaneous removal of various UPOPs has not been well investigated.In this study, a pilot-scale selective catalytic oxidative (SCO) system using a self-developed honeycomb catalyst was built and tested in a typical municipal waste incinerator (MWI) of China. The original concentration of PCDD/Fs in flue gas after the treatment of activated carbon injection (ACI) still exceeded the national emission standard (0.1 ng I-TEQ/Nm³), while the concentrations of PeCBz and HxCBz were one order of magnitude higher than that of PCDD/Fs. For the testing temperature varying from 300 to 200 °C, the removal efficiency of PCDD/Fs range from 39 to 95 %, followed by dl-PCBs with the range of 56–89 %. PeCBz and HxCBz were also removed, though their removal efficiencies were lower than those of PCDD/Fs and dl-PCBs. Both temperature and degree of chlorination influence the removal efficiencies.

Bioremediation of contaminated soils by a combinational approach using specific bacterial species together with ryegrass is a promising strategy, resulting in potentially highly efficient degradation of organic contaminants. The present study tested the combination of strain DXZ9 of Stenotrophomonas sp. with ryegrass to remove DDT and DDE contaminants from soil under natural conditions in a pot experiment. The strain DXZ9 was successfully colonized in the natural soil, resulting in removal rates of approximately 77% for DDT, 52% for DDE, and 65% for the two pollutants combined after 210 days. Treatment with ryegrass alone resulted in slightly lower removal rates (72 and 48%, respectively, 61% for both combined), while the combination of strain DXZ9 and ryegrass significantly (p < 0.05) improved the removal rates to 81% for DDT and 55% for DDE (69% for both). The half-life of the contaminants was significantly shorter in combined treatment with DXZ9 and ryegrass compared to the control. The remediation was mostly due to degradation of the contaminants, as the net uptake of DDT and DDE by the ryegrass accounted for less than 3% of the total amount in the soil. DDT is reductively dechlorinated to DDD and dehydrochlorinated to DDE in the soil; the metabolites of DDE and DDD were multiple undefined substances. The toxicity of the soil was significantly reduced as a result of the treatment. The present study demonstrates that the bioremediation of soil contaminated with DDT and DDE by means of specific bacteria combined with ryegrass is feasible.

Surface soil samples collected from Nansi Lake catchment were analyzed for mercury (Hg) to determine its spatial trends and environmental impacts. Results showed that the average soil Hg contents were 0.043 mg kg⁻¹. A positive correlation was shown between TOC and soil Hg contents. The main type of soil with higher TOC contents and lower pH values showed higher soil Hg contents. Soil TOC contents and CV values were both higher in the eastern catchment. The eastern part of the catchment, where the industry is developed, had relatively high soil Hg contents and a banding distribution of high Hg contents was corresponded with the southwest-northeast economic belt. Urban soils had higher Hg contents than rural soils. The urbanization pattern that soil Hg contents presented a decreasing trend from city center to suburb was shown clearly especially in the three cities. Soil Hg contents in Jining City showed a good consistency with the urban land expansion. The spatial trends of soil Hg contents in the catchment indicated that the type and the intensity of human activities have a strong influence on the distribution of Hg in soils. Calculated risk indices showed that the western part of the catchment presented moderately polluted condition and the eastern part of the catchment showed moderate to strong pollution level. The area with high ecological risk appeared mainly along the economic belt.

Towns and cities are not only the focus of attention for their consumption of energy and resources; they are also scrutinized closely for their emissions of greenhouse gases. China’s urbanization level now exceeds 50%, but there is still much disparity compared with the level of urbanization in developed countries. This study selects China’s urban population and carbon emissions data for the years 1980–2014 and discusses the timing and cause effect of urbanization and the corresponding carbon emissions using the Granger causality test and an error correction model (ECM) then uses STIRPAT models to extract six indicators to measure the quality of urbanization, namely, the level of urbanization, area of built-up regions, added value of tertiary industries, disposable income per capita, green areas per capita, and energy intensity. These six indicators represent population agglomeration, the expansion of urban areas, industrial agglomeration, quality of life improvements, ecological conservation, and technological improvements, respectively. The study divides 29 provinces in China into three groups based on the quality of urbanization and analyzes the impacts of the six indicators of urbanization quality on carbon emissions. The findings show that the impacts of different factors on carbon emissions vary substantially among the provinces. Finally, the study uses the findings to give suggestions on how to develop low-carbon urbanization.

Benchmarking the efficiency of water companies is essential to set water tariffs and to promote their sustainability. In doing so, most of the previous studies have applied conventional data envelopment analysis (DEA) models. However, it is a deterministic method that does not allow to identify environmental factors influencing efficiency scores. To overcome this limitation, this paper evaluates the efficiency of a sample of Chilean water and sewerage companies applying a double-bootstrap DEA model. Results evidenced that the ranking of water and sewerage companies changes notably whether efficiency scores are computed applying conventional or double-bootstrap DEA models. Moreover, it was found that the percentage of non-revenue water and customer density are factors influencing the efficiency of Chilean water and sewerage companies. This paper illustrates the importance of using a robust and reliable method to increase the relevance of benchmarking tools.

Producing quality food in sufficient quantity while using less agrochemical inputs will be one of the great challenges of the twenty-first century. One way of achieving this goal is to greatly reduce the doses of plant protection compounds by improving the targeting of pests to eradicate. Therefore, we developed a vectorization strategy to confer phloem mobility to fenpiclonil, a contact fungicide from the phenylpyrrole family used as a model molecule. It consists in coupling the antifungal compound to an amino acid or a sugar, so that the resulting conjugates are handled by active nutrient transport systems. The method of click chemistry was used to synthesize three conjugates combining fenpiclonil to glucose or glutamic acid with a spacer containing a triazole ring. Systemicity tests with the Ricinus model have shown that the amino acid promoiety was clearly more favorable to phloem mobility than that of glucose. In addition, the transport of the amino acid conjugate is carrier mediated since the derivative of the L series was about five times more concentrated in the phloem sap than its counterpart of the D series. The systemicity of the L-derivative is pH dependent and almost completely inhibited by the protonophore carbonyl cyanide 3-chlorophenylhydrazone (CCCP). These data suggest that the phloem transport of the L-derivative is governed by a stereospecific amino acid carrier system energized by the proton motive force.

Nitrogen (N) and phosphorus (P) from non-point source (NPS) pollution in Nansi Lake Basin greatly influenced the water quality of Nansi Lake, which is the determinant factor for the success of East Route of South-North Water Transfer Project in China. This research improved Johnes export coefficient model (ECM) by developing a method to determine the export coefficients of different land use types based on the hydrological and water quality data. Taking NPS total nitrogen (TN) and total phosphorus (TP) as the study objects, this study estimated the contributions of different pollution sources and analyzed their spatial distributions based on the improved ECM. The results underlined that the method for obtaining output coefficients of land use types using hydrology and water quality data is feasible and accurate, and is suitable for the study of NPS pollution at large-scale basins. The average output structure of NPS TN from land use, rural breeding and rural life is 33.6, 25.9, and 40.5%, and the NPS TP is 31.6, 43.7, and 24.7%, respectively. Especially, dry land was the main land use source for both NPS TN and TP pollution, with the contributed proportions of 81.3 and 81.8% respectively. The counties of Zaozhuang, Tengzhou, Caoxian, Yuncheng, and Shanxian had higher contribution rates and the counties of Dingtao, Juancheng, and Caoxian had the higher load intensities for both NPS TN and TP pollution. The results of this study allowed for an improvement in the understanding of the pollution source contribution and enabled researchers and planners to focus on the most important sources and regions of NPS pollution.

In this study, adsorption behavior of anthill-eggshell composite (AEC) for the removal of hexavalent chromium (Cr⁶⁺) from aqueous solution was investigated. The raw AEC sample was thermally treated at 864 °C for 4 h and characterized using Brunauer-Emmett-Teller (BET), scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and X-ray fluorescence (XRF) techniques. The effects of adsorption process variables including initial Cr⁶⁺ concentration, contact time, and adsorbent dosage on the Cr⁶⁺ removal efficiency were investigated using central composite design (CCD) of response surface methodology (RSM). Equilibrium adsorption isotherm and kinetic were also studied. From the analysis of variance (ANOVA), the three variables proved to be significant and the optimum conditions for Cr⁶⁺ adsorption were obtained to be 150 mg/L initial Cr⁶⁺ concentration, 45.04-min contact time, and 0.5 g adsorbent dosage, which resulted in 86.21% of Cr⁶⁺ adsorbed. Equilibrium isotherm study showed that Freundlich model fitted well to the experimental data. The pseudo-second-order kinetic model appeared to better describe the experimental data. The study showed that mixed anthill-eggshell is a promising adsorbent for removing Cr⁶⁺ from aqueous solution.

Asbestos is an environmental carcinogen, and asbestos-related diseases are a global-scale public health issue. We report three cases (one male and two females) of pleural malignant mesothelioma (PMM) caused by environmental asbestos exposure reported by the Apulia Regional Operating Centre (COR) to the National Mesothelioma Registry (ReNaM). The patients revealed no history of asbestos exposure even after detailed assessment. The environmental (neighborhood) asbestos exposure for each of the three cases was due to both the residential history of the subjects and their workplace, close to a military barracks, at a distance of between 45 and 100 m. Moreover, in addition to this new source of pollution, an asbestos cement factory was located in the urban area of Bari municipality, in the Apulia region, southern Italy. Environmental-residential/neighborhood asbestos exposure in the city of Bari, a contaminated area classified as a site of national concern for land reclamation, is discussed also with reference to the military barracks.

Several technologies and methods have been developed over the years to address the environmental pollution and nutritional losses associated with the dumping of fish processing waste and low-cost fish and by-products. Despite the continuous efforts put in this field, none of the developed technologies was successful in addressing the issues due to various technical problems. To solve the problems associated with the fish processing waste and low-value fish and by-products, a process called pH shift/acid and alkaline solubilization process was developed. In this process, proteins are first solubilized using acid and alkali followed by precipitating them at their isoelectric pH to recover functional and stable protein isolates from underutilized fish species and by-products. Many studies were conducted using pH shift process to recover proteins from fish and fish by-products and found to be most successful in recovering proteins with increased yields than conventional surimi (three cycle washing) process and with good functional properties. In this paper, problems associated with conventional processing, advantages and principle of pH shift processing, effect of pH shift process on the quality and storage stability of recovered isolates, applications protein isolates, etc. are discussed in detail for better understanding.