Soil washing is an efficient remediation technique that enhances the solubility of polycyclic aromatic hydrocarbons (PAHs) in specific surfactant to remediate PAH-contaminated soil. This study evaluated the remediation efficiency of PAH-contaminated soil from a coke oven plant by comparing sodium dodecyl sulfate (SDS), sodium dodecylbenzene sulfonate (SDBS), and Triton X-100 (TX100), as well as TX100-SDS and TX100-SDBS mixed surfactants. Results showed that SDS-TX100 and SDBS-TX100 had synergistic effects on PAH solubilization when surfactant concentrations were above their critical micelle concentration. Competitive effects of the three solubilized PAHs (phenanthrene with three rings, fluoranthene with four rings, and benzo[a]pyrene with five rings) with a particular anionic–nonionic mixed surfactant were investigated. PAHs with more rings were found to slightly decrease the solubility in surfactant solution of PAHs with fewer rings, whereas PAHs with fewer rings promoted the solubility in surfactant solution of PAHs with more rings. The removal ratios of PAHs during the remediation of actual PAH-contaminated soil were best improved by the anionic–nonionic mixed surfactant TX100-SDS (9:1), followed by TX100-SDS (8:2), TX100-SDS (7:3), TX100-SDBS (7:3), TX100, SDBS, and SDS. Therefore, anionic–nonionic mixed surfactants can help improve the remediation performance of PAHs based on their application in tests of cleaning actual PAH-contaminated soil from a coke oven plant.

Iron species are one of the least toxic and least expensive substances that are photocatalytic in the visible region of the spectrum. Therefore, this article focuses on iron-based photocatalysts sensitive to visible light. Photo-Fenton reactions are considered with respect to those assisted by and involve the in situ production of H₂O₂. The possible role that photoactive iron species play by interacting with natural organic matter in water purification in the natural environment is considered. The review also considered photosensitization by phthalocyanines and the potential role that layered double hydroxides may have not only as catalyst supports but also as photosensitizers themselves. Finally, photocatalytic disinfection of water is discussed, and the desirability of standardized metrics and experimental conditions to assist in the comparative evaluation of photocatalysts is highlighted.

Fly ash (FA) for reuse as a construction material is activated using two methods, to produce hydrated silicate and geopolymer gels. We investigated the solidification/stabilization and leaching behavior of PbCl₂in a geopolymer matrix (GM) and hydrated silicate matrix (HSM), based on FA as the source material, to evaluate the environmental and health risks. The GM and HSM synthetic conditions were 60 °C, 20 % relative humidity (RH), and 12 wt% (6 mol/L) NaOH, and 20 ± 2 °C, ≥90 % RH, and 30 wt.%, respectively, based on their compressive strength performances. X-ray diffraction (XRD) showed that Pb participated in hydration and geopolymerization, and was incorporated in the structural components of the hydrated silicate and geopolymer. In leaching experiments, the solidification/stabilization effects of Pb and Cl in the HSM and GM improved with increasing curing time. After long-term curing (28 days), the immobility of Pb in the GM was better than that in the HSM. Sodalite improved the Cl-stabilizing ability of the GM compared with that of the HSM. In static monolithic leaching experiments, HSM and GM had the same Pb-leaching behaviors. Based on the changes in the location of the neutral sphere layer with decreasing acid-neutralizing capacity, Pb release was divided into alkaline-release, stagnation, and acid-release stages. The neutral sphere layer contained the highest Pb concentration during permeation toward the block center from the block edge. This behavior regulation could also apply to other amphoteric metals immobilized by GMs and HSMs.

Predictive toxicology using chemometric tools can be very useful in order to fill the data gaps for ionic liquids (ILs) with limited available experimental toxicity information, in view of their growing industrial uses. Though originally promoted as green chemicals, ILs have now been shown to possess considerable toxicity against different ecological endpoints. Against this background, quantitative structure-activity relationship (QSAR) models have been developed here for the toxicity of ILs against the green algae Scenedesmus vacuolatus using computed descriptors with definite physicochemical meaning. The final models emerged from E-state indices, extended topochemical atom (ETA) indices and quantum topological molecular similarity (QTMS) indices. The developed partial least squares models support the established mechanism of toxicity of ionic liquids in terms of a surfactant action of cations and chaotropic action of anions. The models have been developed within the guidelines of the Organization of Economic Co-operation and Development (OECD) for regulatory QSAR models, and they have been validated both internally and externally using multiple strategies and also tested for applicability domain. A preliminary attempt has also been made, for the first time, to develop interspecies quantitative toxicity-toxicity relationship (QTTR) models for the algal toxicity of ILs with Daphnia toxicity, which should be interesting while predicting toxicity of ILs for an endpoint when the data for the other are available.

To investigate the distribution, source, and ecological risk of heavy metals in Daling River basin, 28 surface sediments collected in this region were analyzed by experimental and theoretical methods. Seven heavy metals, including Pb, Cr, Hg, Cu, As, Cd, and Zn, were detected in all samples. Monte Carlo simulation was used to assess the ecological risks of these heavy metals. It was found that the pollution of Cd was the most serious; the ecological risks in Daling River and Bohai Bay were significantly higher than those in estuary, Bohai Sea, and wetland, but overall, the ecological risks of these heavy metals were low to aquatic organisms in Daling River basin at present. Correlation analysis, principal component analysis, and cluster analysis showed that these heavy metals might originate from the same pollution sources located near Daling River and Bohai Bay.

This study was conducted to determine the composition of surfactants in atmospheric aerosols and rainwater in the vicinity of Lake Chini, Malaysia. Samples of atmospheric aerosol and rainwater were collected between March and September 2011 using a high volume air sampler (HVAS) and glass bottles equipped with funnel. Colorimetric analysis was undertaken to determine the concentration of anionic surfactants as methylene blue active substances (MBAS) and cationic surfactants as disulphine blue active substances (DBAS). The water-soluble ionic compositions were determined using inductively coupled plasma mass spectrometry for cations (Na, K, Mg and Ca) and ion chromatography equipped with a conductivity detector for anions (F⁻, Cl⁻, NO₃⁻, and SO₄²⁻) and the Nessler Method was used to obtain the NH₄⁺concentrations. The source apportionment of MBAS and DBAS in atmospheric aerosols was identified using a combination of principal component analysis (PCA) and multiple linear regression (MLR). The results revealed that the concentrations of surfactants in atmospheric aerosols and rainwater were dominated by anionic surfactants as MBAS. The concentration of surfactants as MBAS and DBAS was dominated in fine mode compared to coarse mode aerosols. Using PCA/MLR analysis, two major sources of atmospheric surfactants to Lake Chini were identified as soil dust (75 to 93 %) and biomass burning (2 to 22 %).

This study presents chances and challenges associated with the application of organic micro-pollutants (OMPs) as indicators in karst system characterization. The methodology and options of possible indications were evaluated based on the interpretation of the spatial distribution of 54 compounds in groundwater in combination with a complex geological setting consisting of multiple aquifer horizons and tectonic faults. A high variety of OMPs are released mainly in an urban area leading to concentrations of several nanograms per liter up to micrograms per liter, which are detectable using a high-performance liquid chromatography with subsequent tandem mass spectrometry (HPLC-MS/MS) method. Since characteristic patterns of spatial distribution were repeatedly observed during a 2-year observation period, important criteria of the aforementioned indicator application are fulfilled. Triazoles, compounds with recent high emission rates, could be successfully applied for the identification of flow directions and the delineation of catchment areas. Concentrations and the number of OMPs are believed to be dependent on properties of covering rock layers. Therefore, OMPs can also be used as a validation tool for vulnerability mapping. Compounds, such as triazines, persistent in the system for more than two decades, demonstrate the interaction between different parts of the aquifer system and the hydraulic characteristics of a tectonic fault zone. Such indicator potentials complement those of artificial tracer tests. Point sources of OMPs and their impact on groundwater could be identified qualitatively. In combination with the interpretation of the geological setting, the distribution of OMPs provides essential information for the development of a conceptual hydrogeological model.

Perfluorooctane sulfonic acid (PFOS) and related substances have been listed as persistent organic pollutants (POPs) in the Stockholm Convention. Countries which have ratified the Convention need to take appropriate actions to control PFOS use and release. This study compiles and enhances the findings of the first inventory of PFOS and related substances use in Turkey conducted within the frame of the Stockholm Convention National Implementation Plan (NIP) update. The specific Harmonized Commodity Description and Coding System (Harmonized System (HS)) codes of imported and exported goods that possibly contain PFOS and 165 of Chemical Abstracts Service (CAS) numbers of PFOS-related substances were assessed for acquiring information from customs and other authorities. However, with the current approaches available, no useful information could be compiled since HS codes are not specific enough and CAS numbers are not used by customs. Furthermore, the cut-off volume in chemical databases in Turkey and the reporting limit in the HS system (0.1 %) are too high for controlling PFOS. The attempt of modeling imported volumes by a Monte Carlo simulation did not also result in a satisfactory estimate, giving an upper-bound estimate above the global production volumes. The replies to questionnaires were not satisfactory, highlighting that an elaborated approach is needed in the communication with potentially PFOS-using stakeholders. The experience of the challenges of gathering information on PFOS in articles and products revealed the gaps of controlling highly hazardous substances in products and articles and the need of improvements.

Data regarding trace element concentrations and fluxes in suspended sediments and bedload are scarce. To fill this gap and meet the international need to include polluted rivers in future world estimation of trace element fluxes, this study aimed to determine the trace element fluxes in suspended sediment and bedload of an environmentally impacted river in Brazil. Water, suspended sediment, and bedload from both the upstream and the downstream cross sections were collected. To collect both the suspended sediment and water samples, we used the US DH-48. Bedload measurements were carried out using the US BLH 84 sampler. Concentrations of Cd, Cr, Cu, Fe, Mn, Ni, Pb, and Zn were determined by inductively coupled plasma (ICP-OES). As and Hg were determined by an atomic absorption spectrophotometer (AA-FIAS). The suspended sediments contributed more than 99 % of the trace element flux. By far Pb and to a less extent Zn at the downstream site represents major concerns. The yields of Pb and Zn in suspended sediments were 4.20 and 2.93 kg km² year⁻¹, respectively. These yields were higher than the values reported for Pb and Zn for Tuul River (highly impacted by mining activities), 1.60 and 1.30 kg km² year⁻¹, respectively, as well as the Pb yield (suspended + dissolved) to the sea of some Mediterranean rivers equal to 3.4 kg km² year⁻¹. Therefore, the highest flux and yield of Pb and Zn in Ipojuca River highlighted the importance to include medium and small rivers—often overlooked in global and regional studies—in the future estimation of world trace element fluxes in order to protect estuaries and coastal zones.

Biogeochemical cycling of internal bioavailable organic phosphorus (OP) is an important source for algal bloom after exogenous P inputs are controlled. Biogeochemical cycling may be affected by hydrological processes and the water cycle and eventually result in water quality deterioration and accelerated lake eutrophication. Poyang Lake is the largest freshwater lake in China. The hydrological condition of the lake has significantly changed since 2003, thereby causing a continuous decline in water level. In this study, sediments were obtained from different elevations and different hydrological conditions in Poyang Lake. The sediments were subjected to sequential extraction and enzymatic hydrolysis to determine the transformation of OP into various chemical forms, their bioavailability, and the exchange between the sediments and overlying water. Results suggested that the descending water level caused by the changes in hydrological conditions was one of the major factors affecting OP dynamics. Long exposure of sediments resulted in high OP content and increased availability. The increased OP content in exposed sediments was primarily derived from H₂O-Pₒ and NaOH-EDTA-Pₒ. Moreover, the increased OP availability in exposed sediments was mainly attributed to the increasing amount of orthophosphate caused by processes governing sediment exposure, promotion of OP release, and transformation of chemical forms from nonlabile to labile. Sediment exposure time and area have considerably expanded since 2003; hence, the amounts of OP and orthophosphate in the sediments have increased by as much as 600 and 120 tons in the lake every year, respectively. Although the increase in orthophosphate only accounted for 6 % of the external total phosphorus, the local region may exhibit higher risk for OP release from the sediments, thereby accelerating quality deterioration. Therefore, maintaining reasonable hydrological conditions is important to protect Poyang Lake water.