Emphasis on sustainable development and the need to protect the environment as well as the adverse effects of environmental pollution on the quality of life have made environmental protection one of the main concerns of economic policymakers. For this purpose, approaches to improve the quality of the environment and the factors affecting it have triggered extensive theoretical and empirical studies over the past few decades. These issues have caught the attention of economic analysts. Accordingly, the main objective of this study is to investigate pollution determinants in developing countries from 1996 to 2016, using  Bayesian Model Averaging Method. Given the fact that the weighted mean square coefficient of GDP is positive, the Environmental Kuznets Curve (EKC) Hypothesis can be confirmed with a high degree of certainty. The probability of  this variable's effect is 0.98%, being partially a component of each of the 10 optimal models which highlights the great importance of this variable to explain the environmental performance. Energy consumption variables for each unit of GDP and value added of industry sector are placed in the second and third ranks with effectiveness  probability of 0.89 and 0.85, respectively. They also have a negative impact on environmental performance. Thus, energy consumption per unit of GDP is considered one of the elements of 8 out of 10 optimal models, while the value added of the industrial sector is an element of 7 out of 10 models. This highlights the relative importance of these variables in explaining environmental performance.

The study has been carried out to assess surface water quality of Old Brahmaputra River from September 2015 to March 2016. DO, BOD5, COD, pH, EC, Chloride, Alkalinity, and Hardness concentrations in water samples have been found to range within 0.66-2.9 mg/L, 21-138 mg/L, 45-250 mg/L, 7.1-7.8, 185-1080 uS/cm, 10-98 mg/L, 85-197 mg/L, and 84-148 mg/L, respectively. Multivariate statistical analyses such as Principal Component Analysis (PCA) and Correlation Matrix (CM) reveal significant anthropogenic intrusion of pollutants in water, while Cluster Analysis (CA) gives decent results that render three different groups of resemblance between the two sampling sites, reflecting the different water quality indicators of the river system. Very strong positive linear relations have been found between Alkalinity vs. Chloride (0.998), COD vs. BOD (0.994), Chloride vs. EC (0.981), Alkalinity vs. EC (0.976), and Hardness vs. EC (0.952) at the significance level of 0.01, which direct their common origin from industrial effluents, municipal wastes, and agricultural activities. River Pollution Index (RPI) indicates that the water of the Old Brahmaputra River varies from low to high pollution.

Water and sediment samples have been collected from five different stations, located along Djendjen River between February and June, 2016 so that the concentrations of Cd, Ni, Zn, and Cu could be determined. The extent of the sediment pollution has been assessed, using the multiple pollution indices, namely Contamination Factor (CF), Pollution Load Index (PLI), and the geoaccumulation index (Igeo).The distribution of trace elements in water and sediment follows Ni>Zn>Cd>Cu and Zn>Ni>Cu>Cd, respectively. The water sample analysis from Djendjen River shows that the total concentrations of Cu, Ni, Cd, and Zn have been lower according to the references. In comparison, sediment mean metal concentrations with several environmental contamination parameters, like probable effect level (PEC) and background levels, indicates that the concentrations of all investigated elements are lesser than PEC, except for Ni, but higher than the background levels. The Igeo values reveal that Cd has been the most accumulated compared to the other metals.  Contamination Factor (CF) confirms that the sediment samples have been moderate in terms of all studied metals contamination. The Pollution Load Index (PLI) values have been above one (>1), indicating an advanced decline of the sediment quality.

The plants, grown in the soils around a Fuel Holding Depot of the Nigerian National Petroleum Corporation, Ibadan, Oyo state, Nigeria have been investigated in this research in terms of their density and species composition so that the impact of contamination by petroleum products on soil seed banks could be determined. The study has used designated plots (25m by 25m) in a site, contaminated by petroleum products, as well as a non-contaminated site. In each plot, replicate soil samples have been collected randomly at 0-5 cm, 5-10 cm, and 10-15 cm, with the soil samples being subjected to emergence of seedling test for three months in order to determine the species composition, species density, and seed viability at different soil depths. Results show that 17 species from 14 families with a total seedling density of 975 seedlings (19,073 seeds/m2) have been encountered in the seed bank of the non-contaminated soil, whereas just one species with 339 seedlings (6,632 seeds/m2) has been recorded in the contaminated soil. Herbaceous species notably, Spermacoce ocymoides, Spermacoce verticillata, and Peperomia pellucida dominate the seed bank of the non-contaminated soil, whereas Eleusine indica is the sole species, encountered in the seed bank of the contaminated soil. There is a general reduction in seed viability as the soil depth is increased. In conclusion, contamination by petroleum products narrow the species composition and density of soil seed bank, though has no effect on seed viability, irrespective of soil depth. Eleusine indica, being the only species encountered in the contaminated soil, may be tolerant to petroleum hydrocarbon, thus portending useful potentials for phytoremediation.

Wind erosion is considered a major global environmental problem. Dust storms from the migration of sand dunes can seriously damage civil, industrial, and agricultural areas and a method to stabilize these sand dunes is mulching. The present study investigates the feasibility of using organic wastes of Press mud and Dunder with clay for the production of environmentally-friendly mulches. Sandy soil from the Dejgah Region, Fars Province, has been used as bed treatment. The treatments have been prepared, using different ratios of the above mentioned materials and 250 ml of water has been added to the each mulch combination to be sprinkled on a plot of sand, 50 × 30 × 1 cm in size. The research has measured Mechanical parameters such as Compressive Resistance (CR), Abrasion Resistance (AR), and Impact Resistance (IR), created by mulches, along with Wind Erodibility (WE) of the treatments and has analyzed the resultant measured data by means of SPSS software. An increase in the fraction of organic wastes has significantly increased CR, IR, and AR values, thus reducing WE. Higher amounts of organic matter and clay increase the CR and the application of 100g Dunder plus 100g Clay has been considered the best composition of organic mulch for stabilization of sand dunes.

The present study investigates the influence of an organophosphorus pesticide, namely Dimethoate, and cadmium on biomarkers of the green alga, Spirogyra sp., in a 14-day experiment. For so doing, it has exposed Spirogyra sp. to 0.0, 100, 200, and 400 mg L-1 of Dimethoate and/or 1 mg L-1 of cadmium chloride (CdCl2) to observe a reduction in chlorophyll a and b level in Spirogyra sp., exposed to 200 and 400 mg L-1 of Dimethoate as well as algae treated with cadmium alone or in combination with Dimethoate. Levels of malondialdehyde (MDA) and total antioxidant in cells, as well as the activity of ascorbate peroxidase (APX) soar in Spirogyra sp., exposed to Dimethoate and/or cadmium (alone or simultaneously). Also Spirogyra’sexposure to cadmium and/or Dimethoate significantly increases catalase (CAT) activity. However, levels of carotenoids in Spirogyra sp., treated with both cadmium and Dimethoate, decline significantly, with no significant change found in catalase activity of Spirogyra sp., exposed to 100 and 200 mg L-1 of Dimethoate, in comparison to the control group. However, CAT activity rises significantly in Spirogyra sp., treated with 400 mg L-1 of Dimethoate. Cadmium can cause cytotoxicity in 1 mg L-1 concentration of the green algae(Spirogyra sp.). On the whole, investigating the biological and biochemical markers in Spirogyra sp., exposed to different concentrations of Dimethoate, has revealed some concentration-dependent toxicity. Furthermore, Dimethoate can synergistically increase toxicity and bioavailability of cadmium in Spirogyra sp.

The present study evaluates the suitability ofactivated carbon, prepared from Cane Papyrus, a plant that grows naturally and can be found quite easily, which serves as a biological sorbent for removal of  Cu2+ ions from aqueous solutions. Fourier transform infra-red analysis for the activated carbon, prepared fromCane Papyrus confirms the presence of amino (–NH), carbonyl (–C=O), and hydroxyl (–OH) functional groups with Bath mode getting used to investigate the effects of the  following parameters: adsorbent dosage (among the rates of 10, 20, and 30 g/L), pH values, Cu2+ initial concentration, and contact time. Results reveal higher efficiency (98%) of powdered adsorbent for removal of Cu2+ ions, which is found at pH=6 with 30 g/L activated carbon, prepared from Cane Papyrus, for a duration of 2 hours. The Freundlich isotherm model with linearized coefficient of 0.982 describes the adsorption process more suitably than the langmuir model, in which this rate equals to 0.899. Pseudo-second order kinetic equation best describes the kinetics of the reaction. Furthermore, it has been found that 0.5M HCl is a better desorbing agent than either 0.5 M NaOH or de-ionized water. The experimental data, obtained, demonstrate that the activated carbon prepared from Cane Papyrus can be used as a suitable adsorbent for Copper(II) ion removal from aqueous solutions.

Application of aromatic compounds has dramatically increased as raw materials in various industries and different factories have been established to produce aromatic compounds. The current research aims at characterizing industrial waste generation in aromatics production process in petrochemical industries and determining the best feasible alternative for waste disposal. For this purpose, the world’s biggest aromatic producer, i.e. Nouri Petrochemical Complex (NPC), located in Asaluyeh, Iran, has been selected as case study. Firstly, different waste streams, generated during aromatics production, have been determined through a specific checklist. Spent industrial soil, catalyst, spent sieve, and Normal­-Formyl­-Morpholine (NFM) solvent are the most important identified wastes in NPC, with the former being the most generated waste in NPC with a rate of 600 tons per year. Afterwards, the mentioned waste has been sampled and important physicochemical specification such as heavy metals and organic compounds has been measured. Ni, Cu, and As are remarkable trace heavy metals, observed in all kinds of generated waste. In the next step, industrial waste classification and coding has been done, based on different guidelines. Finally different feasible alternatives like material recovery, sanitary landfill, and incineration have been compared, based on conventional economic, technical, and environmental indices. The best feasible waste disposal methods are the extraction of heavy metals from spent catalysts, recycling of spent molecular sieves and spent industrial soil as additives to building materials, and recovery of thermal energy by incineration of spent NFM solvent.

Surface ozone (SOZ) can be very harmful if it exceeds the threshold limit. It can accumulate over sea and can return back to the land along with the breeze. Rural and vegetation rich areas often record elevated levels of surface ozone because of the variations in Volatile Organic Compound (VOC) levels, wind velocity and direction. Similarly methane is also an important greenhouse gas and plays a vital role in the atmospheric budget. In this work, ozone and methane levels measured during daytime in a mangrove estuary near Manakudy(8.0911 N, 77.477 E),kanyakumari, South India for a period of ten months from March 2014 to December 2014 are analyzed.SOZ showed an imprecise diurnal pattern with an early morning peak whereas methane recorded an apparent diurnality. The maximum value of SOZ was around 50 ppb. Summer months recorded high levels of SOZ followed by Southwest monsoon (SWM) and Northeast monsoon (NEM).High levels of methane were found in SWM followed by NEM and low concentration during summer. The correlation between SOZ and methane was found as r = -0.257, p

The magnetic derivative of Activated Carbon (AC) is a promising new technique to isolate and recover consumed adsorbent. In this light, the current research seeks to summarise the magnetisation rout of AC and its applications, while identifying both benefits and drawbacks of different synthetic routs. Several methods, such as chemical co-precipitation, hydrothermal, impregnation, ball milling, and one-step synthetic routs, have been studied by previous researchers. Among these methods, chemical co-precipitation is simple, extensively adapted for Magnetic Activated Carbon (MAC) syntheses. In general, the magnetic derivatives of AC show a reduction in the surface area and pore volume, due to introduction of magnetic nanoparticles. Magnetisation enhances contaminants' adsorption, despite the reduction in surface area. It allows elimination of contaminants, barely treated by pristine AC due to the introduction of magnetic materials. Developments in synthetic procedures could overcome the destructive influence of acidity on MAC, providing a shield against it. MAC has been used in several applications, including organic and inorganic contaminant removal. Medically, MAC is used to lead drugs to a specific organ and, thus, reduce damages to non-affected organs. It can be said that the preparation method did not obstruct MAC application for specific contaminant adsorption. MAC regeneration has been reported for several sorption cycles, making the process sustainable and cost-effective. Future work could further develop the synthetic route and enhance the characteristics of the produced composite. It also may consider the influence of iron on the treated water, depending on its proposed usage.