Colouring agents are highly present in diverse products in the human environment. We aimed to elucidate the fibrogenic cascade triggered by the food dyes tartrazine and chlorophyll. Rats were orally given distilled water, tenfold of the acceptable daily intake of tartrazine, or chlorophyll for 90 consecutive days. Tartrazine-treated rats displayed a significant rise (p < 0.05) in the mRNA levels and immunohistochemical localization of the renal and hepatic fibrotic markers collagen 1-α, TGFβ-1, and fibronectin and the apoptotic marker caspase-3. Moreover, a significant increment (p < 0.05) in the levels of AST, ALP, creatinine, and urea was evident in both experimental groups but more significant differences were noticed in the tartrazine group. Furthermore, we found a marked increment in the MDA level and significant declines (p < 0.05) in the levels of the SOD, CAT, and GSH enzymes in the kidney and liver from tartrazine-treated rats. The histological investigation reinforced the aforementioned data, revealing hepatocytes with fibrous connective tissue proliferation, apoptotic hepatocytes and periportal fibrosis with tubular necrosis, and shrunken glomeruli and interstitial fibrous tissue proliferation. We concluded that, even at the exposure to high concentrations for long durations, chlorophyll exhibited a lower propensity to induce fibrosis, apoptosis, and histopathological perturbations than tartrazine.

The effects of plant-based carbon source addition on wastewater NO₃⁻-N removal and the involved microorganisms, especially denitrifying bacteria, were investigated. A synthetic wastewater (NO₃⁻-N, 15 mg/L) was treated through the batch experiment, which included three inoculation cycles (7 days/cycle), and was conducted at 25 °C. Four natural plant substrates, namely, rice straw (RS), wheat straw (WS), ryegrass (RG), and reed (RD), were used as carbon sources and supplemented at the rate of 1% (w/v). The results showed that both RS and WS performed well in promoting NO₃⁻-N removal (79.55–97.07%). While RG removed only 22.08% of NO₃⁻-N in the first cycle, the removal efficiency increased afterward (86.09–95.82%). Conversely, the NO₃⁻-N removal rate of RD decreased from 95.10 to 24.77% as a result of its low ability to supply carbon. With respect to the microorganisms, the RS treatment resulted in more bacteria and denitrifying genes such as narG, nirK, nirS, and norB than other treatments, while the highest number of nosZ gene copies was recorded in the WS treatment. Sequencing results revealed that Firmicutes (18.19–56.96%), Proteobacteria (38.82–74.80%), and Bacteroidetes (3.15–4.15%) were three dominant bacterial phyla for RS, WS, and RD treatments. Furthermore, the genera Enterobacter, Massilia, and Bacillus were the main denitrifying bacteria participating in the NO₃⁻-N removal. Furthermore, correlation analysis indicated that the denitrifying genus Sphingobacterium played an important role in enhancing nitrogen removal. This study suggested that RS is the superior plant-based carbon source for denitrifying bioreactors used in agricultural runoff treatment.

The objective of this study is to assess the environmental sustainability of a large water treatment plant through life cycle assessment (LCA) approach. This study is a pioneering one that explores the environmental impacts of a water treatment plant in Turkey by using the data collected from an actual plant. Decision makers of the treatment plant under investigation, operators of similar installations, and the scientific researchers that work on LCA of water treatment facilities are defined as the target audience. GaBi software is used for the LCA model, and CML 2001 method is adopted to calculate the results given per 1 m³ water ready to be distributed to the city. The plant serves about 2,600,000 people generating a maximum potable water flow rate of 400,000 m³/day. In the facility, 0.57 kWh of electricity is required to obtain 1 m³ of water. Of this total electricity consumption, 85% is allocated to inlet and outlet pumping stations. The results denote that the environmental impacts are dominated by electricity consumption that in turn depends on the energy source/s adopted. Sensitivity analysis on energy sources reveals the following outcomes: In case of using hard coal as energy source rather than grid mix, impacts are increased apart from freshwater aquatic ecotoxicity potential, ozone layer depletion potential, and abiotic depletion potential elements. Once solar panels are used instead of grid mix, values for all impact categories except abiotic depletion potential elements and human toxicity potential are lowered. The usage of wind turbines in place of grid mix results in 29 to 84% reductions in all investigated impact categories. The best option to decrease the environmental impacts is attained when energy is generated using wind turbines. As pumps having 90% efficiency replace the pumps with 60% efficiency, reductions ranging from 15 to 24% on all impact categories are obtained. The work performed for this study should be further pursued to obtain more representative inventory data for countries with scarce LCA studies.

This paper presents the methodology and results of the national radon survey in Bulgaria and its spatial variability. The measurements were carried out in 2778 dwellings using CR-39 track detectors over two successive 9 and 3-month periods from April 2015 to March 2016. The arithmetic (AM) and geometric (GM) means of annual indoor radon concentration were 111 ± 105 Bq/m³ and 81 Bq/m³ (GSD = 2.15), respectively. The distribution of data has been accepted to be log-normal. Two hypotheses have been investigated in the paper. The first one was a spatial variation of indoor radon concentration and the second was spatiality of the factor that influences radon variation. The indoor radon concentrations in the 28 districts have been significantly different, which prove the first hypothesis. The influence of the factors, geology (geotectonic unit, type of rock, and faults distance of the measuring site), type of the region, and the presence of the basement in the building on radon spatial variation, was examined. The analyses have been shown that they significantly affect radon variations but with a relatively small contribution in comparison to the radon variation between district. Furthermore, the significance and contribution of the investigated factors were different in each district, which confirmed the second hypothesis for their spatiality.

Various research works are being undertaken around the world on the subject of thermal efficiency improvisation and emission reduction from diesel engines. This research work analyzes the performance and emission characteristics of a thermal barrier coated diesel engine which used palm biodiesel. The piston and cylinder liners were coated with equal percentages of alumina (Al₂O₃) and yittria-stabilized zirconia (YSZ) powder using plasma spraying coating method. The piston was coated with 100 μm thickness and the two cylinder liners were coated with 150 and 200 μm thicknesses and were used to analyze the performance and emission characteristics. Test results of the thermal barrier coated engine using palm biodiesel were compared with the results derived from the base engine. The tests revealed an increase of 3.8% specific fuel consumption (SFC) as an average when neat palm biodiesel was used in the base engine. Interestingly, the palm biodiesel used in the 150- and 200-μm thick thermal barrier coated engine was responsible for a significant decrease of the SFC by an average of 4.18% and 8.05% respectively. The brake thermal efficiency was found to decrease on an average of 1.02% when tests were run using the neat palm biodiesel in the base engine. But an average proportionate increase of 0.72% and 2.19% was visible when palm biodiesel was used in the tests conducted on the 150- and 200-μm thick thermal barrier coated engine. There was also an understandable brake specific reduction of 0.991 g/kWh carbon monoxide (CO) emission and 0.025 g/kWh unburned hydrocarbon (HC) levels. The nitrogen oxide (NOₓ) emission was observed as 14.06 g/kWh in the 200-μm thick thermal barrier coated engine which was slightly higher when the results were compared with that of the uncoated engine. The novelty of this research investigation is based on the usage of yttrium-stabilized zirconia and alumina thermal barrier coating on the cylinder liner and piston head of engine. This is justified due to the fact that most of the previous investigations undertaken focused on the thermal barrier coating in the piston, valve, and cylinder head alone. The utility factor of the palm biodiesel (B 100) in the low heat rejection engine has also proved to be another significant and novel factor in the present investigation outlined in this paper. This is mainly due to the fact that the ongoing investigations in this realm concentrated only on blends of 20 to 30% of palm biodiesel with diesel fuel in the low heat rejection diesel engine.

Arbuscular mycorrhizal fungi (AMF) are obligate plant root symbionts delivering a range of benefits to the host plant such as improved nutrient acquisition and resistance to pathogens and abiotic stress. However, whether they can enhance the function of plant root systems damaged due to subsidence caused by excessive coal mining has not been well explored. In the present study, we investigated the effects of AMF using Funneliformis mosseae (FM) as the test fungus on maize (Zea mays L.) growth and hormone levels under different levels of root damage stress by simulating mining subsidence. The results show that plants treated with FM had more shoots, roots, mycorrhizal colonization and higher hyphal density than those without FM under the same simulated mining-induced subsidence conditions. In addition, plants treated with FM also possessed higher N, P, K, Ca, and Mg contents in the shoots and the roots and higher indole-3-acetic acid, gibberellin (GA), and cytokinin (CTK) contents in the roots, indicating that the mycorrhizal association promoted plant biomass and nutrient uptake. FM treatment was no longer beneficial when root damage due to mining-induced subsidence affected more than half of the roots. Soil SOC, AK, and TG were identified as key factors affecting GA, CTK, IAA, and ABA, and AMF can alter plant hormones directly via the hyphae and indirectly by altering soil physicochemical properties under root damage stress. Overall, our results provide baseline data for assessing the biological reclamation effects of AMF on coal mining-induced subsidence.

Waste electrical and electronic equipment (WEEE) contains both toxic and valuable materials. Due to rapid development of information and communication technologies (ICT), a large amount of WEEE have been produced, leading to increasing academic efforts in this field. This study aims to depict the trends and features of WEEE-related studies through a bibliometric analysis. The results show that the total number of WEEE-related publications had sharply increased, with China as the leading country. University of Chinese Academy of Sciences is the most productive WEEE-related research institution, while Mai BX is the most productive author. As such, Waste Management, Journal of Cleaner Production, and Environmental Science & Technology are the most influential journals. The research hotspots of WEEE mainly focus on the recycling and treatment technologies, environmental impacts, and relevant policies of WEEE. By tracing the evolutionary pathway of WEEE research, it is clear that the research frontiers have switched from electronic equipment, extended producer responsibility, sediment, environment and design, risk assessment to life cycle assessment, mobile phone, and behaviors. This study provides valuable insights to those WEEE-related scholars so that they can identify their own research topics and partners. This paper is one of the first studies in WEEE research field that offers critical discussions and suggestions related to research development and future trends, and used visualized tools to present the holistic picture of this field.

Phthalates (PAEs) in drinking water sources such as the Yangtze River in developing countries had aroused widespread concern. Here, the water, suspended particulate matter (SPM), and sediment samples were collected from 15 sites in wet and dry seasons in Zhenjiang, for the determination of six PAEs (DMP, DEP, DIBP, DBP, DEHP, and DOP) using the solid-phase extraction (SPE) or ultrasonic extraction coupled with gas chromatography-mass spectrometry (GC-MS). The total concentrations of six PAEs (Σ₆PAEs) spanned a range of 2.65–39.31 μg L⁻¹ in water, 1.97–34.10 μg g⁻¹ in SPM, and 0.93–34.70 μg g⁻¹ in sediment. The partition coefficients (Kd₁) of PAEs in water and SPM phase ranged from 0.004 to 3.36 L g⁻¹ in the wet season and from 0.12 to 2.84 L g⁻¹ in the dry season. Kd₂ of PAEs in water and sediment phase was 0.001–9.75 L g⁻¹ in the wet season and 0.006–8.05 L g⁻¹ in the dry season. The dominant PAEs were DIBP, DBP, and DEHP in water and SPM, DIBP, DEHP, and DOP in sediment. The concentration of DBP in water exceeded the China Surface Water Standard. The discharge of domestic sewage and industrial wastewater might be the main potential sources of PAEs. The risk quotient (RQ) method used for the risk assessment revealed that DBP (0.01 < RQ < 1) posed a medium risk, while DIBP and DEHP (RQ > 1) posed a high environmental risk in water, DIBP (RQ > 1) also showed a high risk in sediment.

Sequential coupling of high-density luffa sponge (HDLS) immobilized microorganism and permeable reactive barriers (IM Bio-PRBs) was superior to intimate coupling of free microorganism and permeable reactive barriers (FM Bio-PRBs) for remediation of 1,1,1-trichloroethane contaminated groundwater. IM Bio-PRBs had much better performance to removal 1,1,1-trichloroethane (1,1,1-TCA) and prevent the transport of 1,1,1-TCA and inorganic ions (NO₃⁻, PO₄³⁻, and SO₄²⁻). The majority of them were prevented and accumulated in upgradient of IM Bio-PRBs. 1,1,1-TCA and inorganic ions in there contributed to the much faster growth of microorganism in upgradient aquifer. Therefore, the removal of 1,1,1-TCA and consumption of inorganic ions in upgradient of Bio-PRBs played a constructive role in reducing the processing load of following zero-valent iron (ZVI) PRBs and the negative effect of free microorganism cells (biological clogging) and inorganic ions (chemical clogging) on Bio-PRB permeability. In addition, IM Bio-PRBs were more conducive to accelerate the removal of 1,1,1-TCA in long-term remediation and 1,1,1-TCA residual concentration significantly lower than the safety standard of 0.2 mg L⁻¹. The change of terminal by-products of 1,1,1-TCA contaminated groundwater in Bio-PRBs showed that 1,1,1-TCA could be effectively de-chlorinated and mineralized in Bio-PRBs. The reductant H₂S (prolong the service life of ZVI-PRBs) was much more produced and utilized in IM Bio-PRBs. Taken together, sequentially coupled IM Bio-PRBs had a better overall performance, and its service life could be prolonged. It was a different design and idea to update conventional PRB remediation technology and theory.