The antimicrobial agent triclosan (TCS) has attracted much attention worldwide because of its pervasive existence in the human body and environment. TCS exposure has been reported to be associated with decreased male reproductive function. However, few studies have investigated these associations in humans. To examine the relationship between TCS in urine and male semen quality. A total of 406 men from a reproductive clinic were enrolled in this study. Urinary TCS concentrations were determined by ultra-high performance liquid chromatography–electrospray ionization tandem mass spectrometry. Sixteen semen parameters were assessed according to the guidelines of World Health Organization (WHO), including parameters for volume, count, motility, and motion. We used multivariate linear regression models and restricted cubic splines to estimate the linear and non-linear associations between TCS exposure and semen parameters, respectively. Logistical regression models were further applied to explore the associations with abnormal semen quality. TCS was detected in 74.6% of urine specimens. The monotonous trend of TCS tertiles and continuous TCS levels with all semen quality parameters were not observed in multivariate linear regression models (p > 0.05). However, compared with those in the lowest tertile, subjects in the second tertile showed significantly higher linearity and wobble (p < 0.05), indicating potential effects on sperm motion. In the models using restricted cubic splines with 3–5 knots, there were no significant non-linear associations between TCS exposure and any semen quality parameter. In addition, TCS tertiles were not associated with the risk of abnormal semen quality (i.e., count and motility) in the logistical regression models. Our results revealed that low-level TCS exposure may have limited (none or modest) effects on male semen quality, potentially inducing some fluctuations. Further mechanistic studies on low levels of exposure are needed.

Plastic pollution represents the most widespread threaten throughout the world and, amongst aquatic habitats, freshwaters and in particular riparian zones seems to be highly disturbed. Since the plastic storage and accumulation on the riparian vegetation have not yet been deeply investigated, here, we focussed on the riparian zone's function in trapping plastic litter. To do so, we assessed the occurrence and density of plastics in different vegetated (arboreal, shrubby, herbaceous, reed, bush) and unvegetated types in 8 central Italian rivers, running in different land use contexts. Our results showed that plastic pieces, bags, bottles and food containers were the most abundant specific categories on the vegetated types, demonstrating the riparian vegetation role in trapping plastic litter. Specifically, the highest plastic density was found on the shrubby type suggesting that a tree shape retains plastics more easily than all other vegetated and unvegetated types. Shape and size classification of plastics are not significantly different between vegetated and unvegetated types. These findings allow to collect important information on how the riparian vegetation can be exploited in management activities for removing plastic litters from both freshwater and sea, being the former considered the main plastic source for the latter. This study highlights a further ecosystem service as mechanical filter provided by the riparian zone, even if further studies ought to be performed to understand the role of vegetation as plastic trap and the possible detrimental effects of plastics on the plant health status.

The lockdown measures caused by the COVID-19 pandemic substantially affected air quality in many cities through reduced emissions from a variety of sources, including traffic. The change in PM₂.₅ and its chemical composition in downtown Toronto, Canada, including organic/inorganic composition and trace metals, were examined by comparing with a pre-lockdown period and respective periods in the three previous years. During the COVID-19 lockdown, the average traffic volume reduced by 58%, whereas PM₂.₅ only decreased by 4% relative to the baselines. Major chemical components of PM₂.₅, such as organic aerosol and ammonium nitrate, showed significant seasonal changes between pre- and lockdown periods. The changes in local and regional PM₂.₅ sources were assessed using hourly chemical composition measurements of PM₂.₅. Major regional and secondary PM₂.₅ sources exhibited no clear reductions during the lockdown period compared to pre-lockdown and the previous years. However, cooking emissions substantially dropped by approximately 61% due to the restrictions imposed on local businesses (i.e., restaurants) during the lockdown, and then gradually increased throughout the recovery periods. The reduction in non-tailpipe emissions, characterized by road dust and brake/tire dust, ranged from 37% to 61%, consistent with the changes in traffic volume and meteorology across seasons in 2020. Tailpipe emissions dropped by approximately 54% and exhibited even larger reductions during morning rush hours. The reduction of tailpipe emissions was statistically associated with the reduced number of trucks, highlighting that a small fraction of trucks contributes disproportionally to tailpipe emissions. This study provides insight into the potential for local benefits to arise from traffic intervention in traffic-dominated urban areas and supports the development of targeted strategies and regulations to effectively reduce local air pollution.

A large amount of disposable plastic face masks (DPFs) is produced and used during the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) pandemic, which results in an inevitable consequence of the dramatic increase of DPFs waste. However, the impact of DPFs exposure to the environment on their toxicity is rarely considered. In this study, a range of 76–276 items/L microplastics (MPs) was detected in the DPFs leachates, and fibrous (> 80.3%) and polypropylene (PP, > 89.2%) MPs were dominant. Co, Cu, Ni, Sr, Ti and Zn, were commonly detected in all leachates of the tested DPFs. Organics, such as acetophenone, 2,4-Di-tert-butylphenol, benzothiazole, bisphenol-A and phthalide, were found in the DPFs leachate, which were including organic solvents and plasticizer. Besides, we first found an emerging environmental risk substance, namely environmentally persistent free radicals (EPFRs), was generated in the DPFs leachates. The characteristic g-factors of the EPFRs was in a range of 2.003–2.004, identified as mixture of carbon- and oxygen-centered radicals. By means of in vitro toxicity assay, the DPFs leachate were confirmed to cause cytotoxicity and oxidative stress. Significantly, it is found that the formed EPFRs could contribute more toxic effects. Furthermore, when compared to N95 respirators, the tested surgical masks tend to release more MPs, leach more metals and organics, and generate more EPFRs. Surgical masks were thus showed higher risk than N95 respirators after exposure to water. This work highlights the importance of understanding the chemical complexity and possible toxicity of DPFs for their risk assessment.

Plastic film mulching and use of wastewaters for irrigation have been common agricultural practices for over half a century in Tunisia, especially in arid regions, resulting in the undesired creation of a pathway for microplastics (MPs) to enter farmland soil. In order to assess the extent and characteristics of soil contamination by MPs in the Moknine province, an area of intensive agricultural practices, 16 farmland soil samples were collected and characterized. The total concentration of targeted MPs was 50–880 items/kg; among them, the most common MPs type being polypropylene (PP), mainly occurring as white/transparent fibers with small size (cross section <0.3 mm). SEM images of MPs surfaces revealed multiple features related to environmental exposure and degradation. ATR-FTIR spectroscopy and pyrolysis-GC/MS analyses enabled the accurate identification of MPs separated from the embedding soil micro- and macro-aggregates. Finally, contamination of the polymeric microparticles with a broad range of metals was found by ICP-MS analysis, suggesting that MPs can be vectors for transporting heavy metals in the soil and indicators of soil contamination as a result of mismanagement of industrial wastewaters.

Paraquat, a widely used herbicide, causes environmental pollution, and liver injury in humans and animals. As a natural compound in fruits, ellagic acid (EA) shows anti-inflammatory and antioxidant effects. This study examines the beneficial effects of dietary EA against the paraquat-induced hepatic injury and further explores the underlying molecular mechanisms using a piglet model. Post-weaning piglets are fed basal diet supplemented with 50 mg/kg, 100 mg/kg, or 200 mg/kg EA for 3 weeks. At week 2, hepatic injury is induced by 4 mg/kg paraquat followed by 7 days recovery. EA supplementation significantly mitigates paraquat-induced hepatic fibrosis, steatosis, and high apoptotic rate. In agreement, EA supplementation reduces serum pro-inflammatory levels, ameliorates inflammatory cells infiltration into hepatic tissue, which are associated with suppressed NF-κB signaling during paraquat exposure. In addition, EA supplementation significantly improves activities of antioxidative enzymes which were correlated with activated Nrf2/Keap 1 signaling during paraquat exposure. Furthermore, EA supplementation restores cecal microbial community during paraquat exposure. The protective effect of EA is strongly linked with increased relative abundance of Lactobacillus reuteri and Lactobacillus amylovorus. Taken together, EA supplementation effectively reduced the occurrence of hepatic oxidative damage and inflammation induced by paraquat through modulating cecal microbial communities, which provides a novel nutritional therapeutic strategy for hepatic injury.

Polybrominated dibenzo-p-dioxins/furans (PBDD/Fs) and polychlorinated dibenzo-p-dioxins/furans (PCDD/Fs) share similar toxicities and thermal origins, e.g., municipal solid waste incinerator (MSWI). Recently, PBDD/Fs from MSWI attracted rising concern because their important precursors, i.e., brominated flame retardants (BFRs), were frequently found in various wastes for landfill or MSWI feedstock. So far, however, little is known about PBDD/Fs and their associated risks in the vicinal environments of MSWI. Here we analyzed PBDD/Fs and PCDD/Fs in 29 soil samples collected around a multiyear large-scale MSWI, and compared their spatial distributions, sources and risks. PBDD/Fs demonstrated comparable concentrations and toxic equivalent quantities (TEQs) to PCDD/Fs in these samples. Spatially, both the concentrations of PBDD/Fs and PCDD/Fs decreased outwards from the MSWI, and exhibited significant linear correlations with the distances from the MSWI in the southeast downwind soil, suggesting the influence of the MSWI on its vicinal soil environment. However, the existence of other dioxin sources concealed its influence beyond 6 km. PBDD/Fs in the soils were characterized by highly-brominated PBDFs, especially Octa-BDF, and their sources were diagnosed as the MSWI and diesel exhaust; PCDD/Fs, however, were dominated by highly-chlorinated PCDDs, particularly Octa-CDD, and were contributed individually or jointly by the MSWI, automobile exhaust and pentachlorophenol (PCP)/Na-PCP. The non-carcinogenic risks of dioxins in all the soil samples were acceptable, but their carcinogenic risks in 17% of the samples were unacceptable. These samples were all located close to the MSWI and highways, therefore, the land use of these two high-risk zones should be cautiously planed.

Volatile organic compounds (VOCs) represent a considerable threat to humans and ecosystems. Strategic remediation techniques for the abatement of VOCs are immensely important and immediately needed. Given a unique set of optical, mechanical, electrical, and thermal characteristics, inimitable surface functionalities, porous structure, and substantial specific surface area, graphene and derived nanohybrid composites have emerged as exciting candidates for abating environmental pollutants through photocatalytic degradation and adsorptive removal. Graphene oxide (GO) and reduced graphene oxide (rGO) containing oxygenated function entities, i.e., carbonyl, hydroxyl, and carboxylic groups, provide anchor and dispersibility of their surface photocatalytic nanoscale particles and adsorptive sites for VOCs. Therefore, it is meaningful to recapitulate current state-of-the-art research advancements in graphene-derived nanostructures as prospective platforms for VOCs degradation. Considering this necessity, this work provides a comprehensive and valuable insight into research progress on applying graphene-based nanohybrid composites for adsorptive and photocatalytic abatement of VOCs in the aqueous media. First, we present a portrayal of graphene-based nanohybrid based on their structural attributes (i.e., pore size, specific surface area, and other surface features to adsorb VOCs) and structure-assisted performance for VOCs abatement by graphene-based nanocomposites. The adsorptive and photocatalytic potentialities of graphene-based nanohybrids for VOCs are discussed with suitable examples. In addition to regeneration, reusability, and environmental toxicity aspects, the challenges and possible future directions of graphene-based nanostructures are also outlined towards the end of the review to promote large-scale applications of this fascinating technology.

A biological treatment method was tested in laboratory conditions for the removal of hydrocarbons contained in a waste disposal soil sample consisting of excavated sandy soil from a former fueling station. Two fractions of hydrocarbons were quantified by GC-FID: diesel (C₁₀–C₂₁) and lubricant oil (C₂₂–C₄₀). Meat and bone meal (MBM, 1% w/w) was used as a bio-stimulant agent for soil organisms. Cyclodextrin, an oligosaccharide produced from starch by enzymatic conversion, was also used to assess its ability to improve the bioavailability/biodegradability of hydrocarbons in the soil. Parameters such as temperature, pH, water content and aeration (O₂ availability) were monitored and optimized to favor degradation processes. Two different experimental tests were prepared: one to measure the degradation of hydrocarbons; the other to monitor the mobility of some elements in the soil and in the leachate produced by watering with tap water. Soil samples treated with MBM and cyclodextrin showed, over time, a greater removal of the more persistent hydrocarbon fraction (lubricant oil). MBM-treated soils underwent a faster hydrocarbon removal kinetic, especially in the first treatment period. However, the final hydrocarbon concentrations are comparable in all treatments, including control. Over time, the effect of cyclodextrin on hydrocarbon degradation seemed to be relevant. MBM-treated soils sequestered lead in the very first weeks. These results highlight the intrinsic capacity of soil, and its indigenous microbial communities, to degrade petroleum hydrocarbons and suggest that MBM-induced bioremediation is a promising, environmentally friendly technology which should be considered when dealing with hydrocarbon/heavy metal co-contaminated soils.

Antibiotics accumulation in the environment has given rise to multi-drug resistant 'superbugs' and antibiotics resistence genes (ARGs). Chloramphenicol (CAP), a kind of widely used antibiotics, was chosen as the model compound to investigate its degradation during electrochemical treatment process. The prepared Ti/PbO₂–La electrodes had a denser surface and a more complete PbO₂ crystal structure than Ti/PbO₂ electrode. The doping of La increased the onset potential and the overpotential, increased the current value of the oxidation peak and the reduction peak, reduced the impedance, and increased the lifetime. The reactions CAP degradation and TOC removal on Ti/PbO₂–La electrode was both primary kinetic reactions. CAP degradation rate increased with current density, and TOC obtained the highest removal at current density of 25 mA cm⁻². The electrolyte concentration had a small effect in the range of 0.050–0.150 mol L⁻¹. The effects under acidic and neutral conditions were better than under alkaline conditions. CAP was mainly directly oxidized at the electrode surface and indirect oxidation also took place via generated ·OH and SO₄·⁻. 15 intermediates and 2 degradation pathways have been postulated. The entry of CAP and CAP intermediates into the environment caused the alteration in bacterial community and ARGs, while complete degradation products had little effect on them. Redundancy analysis showed that intI1 was the dominant factor affecting ARGs, and Actinobacteria and Patescibacteria were the main factors affecting the abundances of ARGs in the microbial community.