Background, aim and scope For reliable environmental risk assessment of pollutants, knowledge on the effects at different levels of biological organisation is needed. During the early days of biomarker research in environmental studies approximately two decades ago, biochemical biomarkers were considered as the most promising tool for such purposes. Among these, three enzymes have often been studied: catalase (CAT), glutathione S-transferase (GST) and cholinesterase (ChE). However, despite their intensive research, their measurements in invertebrates have not been commonly applied in environmental risk assessment (ERA) or for regulatory purposes. Main features In the present review, we summarise our past experiences in biochemical biomarker research in two crustacean species: water flea Daphnia magna and terrestrial isopod Porcellio scaber. This is to orientate their use and to provide recommendations for the use of novel biomarkers in environmental studies, such as proteomic or genomic responses. Results and discussion We assessed the intrinsic properties of biochemical biomarkers CAT, GST and ChE in the D. magna and the isopod P. scaber. It was found that they are not in agreement with the expectations that were previously given for their use in environmental studies. To advance their use in environmental risk assessment, we suggest that based on their properties, their role should be more specifically defined. ERA includes several distinct steps, among them hazard identification, effect assessment and finally risk characterisation, each of which requires a different type of toxicity data. We recommend that the use of biochemical markers is most appropriate for hazard identification because this is a procedure whose purpose is to characterise the potential hazard of the substance in question and is more flexible in terms of using different tools. Furthermore, our results imply that biochemical markers are not always more sensitive than whole-organism responses, as was anticipated. Their sensitivity depends on the mode of action, duration of exposure and test species. Therefore, we suggest that combining both a battery of biomarkers from different levels of biological organisation and an array of biomarkers within a single level could identify hazard adequately. Conclusions The lesson learnt from biochemical biomarkers in environmental studies utilizing crustacean model species is that, for successful application of each group of biomarkers, their intrinsic properties are needed to be known before an (eco)toxicity study is designed. We suggest that a substantial body of experience obtained with biochemical biomarkers should be exploited to new emerging biomarkers in environmental studies in order to facilitate their application. Recommendations and perspectives The future of biomarkers lies in a combination of traditional biochemical and new-generation biomarkers. The latter are not only a potential replacement for existing biomarkers but will also provide new knowledge which might encourage renewed research and development of traditional biomarkers. For research purposes, complete ecotoxicity information should include contributions from molecular fingerprint of an organism, as well as whole organism, population and ecosystem responses. Still, the type of biomarkers used for routine purposes will depend on their reproducibility, their ease of use, robustness, affordability of the methodology and the type of chemicals, organisms and ecosystem of interest.

Bitumen is a black, thermoplastic, hydrocarbon material derived from the processing of crude oil. At ambient temperature, bitumen is solid and does not present any health/environmental risks. This is one of the main reasons that bitumen is widely used for road construction all over the world. But during manufacturing/modification according to its application, storage, transportation, and use of bitumen is heated giving off various hydrocarbons emissions. In recent years, there has been increasing interest in investigating the potential of bitumen emissions to cause health effects. This is mainly because of the reason that bitumen has small amount of poly-aromatic hydrocarbons, along with some other volatiles like benzene, toluene, etc., which are known to be carcinogenic in nature. Thus, assessment of the emission characteristics and health hazards of bitumen fumes may have far reaching industrial economic and public health implications. In this review, we will discuss about the emission characteristics from bitumen, asphalts, or road construction, which is mainly contributed by bitumen fumes. Sampling strategies and analytical methods employed are also described briefly.

Background, aim, and scope Lead, a major contaminant, is highly used in paint manufacturing due to its anticorrosive properties. Recent reports indicated high lead content among Indian paints used for commercial purposes. Painters are continuously exposed to these lead containing paints during painting of both commercial as well as residential buildings. Lead is well-known for its genotoxicty in occupational workers; however, in Indian painters the genotoxic effects of lead have not been reported to date. Therefore we aimed to study the genotoxic end points in painters due to their long-term exposure to these high lead-containing Indian paints. Materials and methods Study group selection was made after a questionnaire administration, which included questions about lifestyle and medical history to exclude exposure to the other potential sources of genotoxics. Blood and buccal cell samples were obtained from 30 male painters and from a similar number of age-matched controls of same location with no occupational exposure to lead. Blood lead levels (Pb-B) were measured in painters and controls. Micronucleus (MN) frequencies and nuclear changes, i.e., karyorrhexis, karyolysis, broken egg, and binucleated, were investigated in buccal epithelial cells. Results Painters had significantly (P < 0.01) greater lead levels in blood than the control group. MN frequencies and nuclear changes in buccal epithelial cells were also significantly (P < 0.01) elevated in painters as compared with control subjects. Regression analysis also revealed significant (P < 0.01) association of Pb-B with all the genotoxic endpoints in painters. Cytogenetic damage was significantly associated with Pb-B as no other co-founding factors (smoking, alcohols) showed significant difference between both groups. Discussion Lead is widely used in paints which may serve as potential source of exposure among painters due to their long-term engagement with paints. Our results clearly demonstrated genotoxicity among the exposed population as evident from increase micronucleus frequencies, frequent nuclear changes, and apoptosis. Many studies had previously related nuclear change events in buccal epithelial cells with the progression of different carcinomas. Furthermore in-depth investigations with larger sample size are needed to provide evidence to this effect. Conclusions Here, we report cytogenetic toxicity to the exposed population by the high lead containing paints from India for the first time. Frequent, high and unregulated use of lead in paints may cause genetic mutation and may accelerate cytogenetic damage which may further lead to different carcinomas in painters. These findings need to be considered and necessary steps should be taken to protect the occupational workers engaged with these high lead-containing paints. Recommendations The use of lead in paints is completely unregulated in India and routine surveillance of paints for lead content is still lacking. These paints are readily available in markets and are also used in other products (jewelry, miniblinds) which could be exported to other countries including United States and Europe. Serious consideration should be given to the inclusion of regulations and bans on the use of lead in paints. Moreover, attention should also be paid towards the use of various protective measures (face-masks, hand gloves, and separate clothes) by the workers as safe work practices during working periods.

Background, aim, and scope Pharmaceuticals are emerging pollutants widely used in everyday urban activities which can be detected in surface, ground, and drinking waters. Their presence is derived from consumption of medicines, disposal of expired medications, release of treated and untreated urban effluents, and from the pharmaceutical industry. Their growing use has become an alarming environmental problem which potentially will become dangerous in the future. However, there is still a lack of knowledge about long-term effects in non-target organisms as well as for human health. Toxicity testing has indicated a relatively low acute toxicity to fish species, but no information is available on possible sublethal effects. This study provides data on the physiological pathways involved in the exposure of Atlantic salmon as representative test species to three pharmaceutical compounds found in ground, surface, and drinking waters based on the evaluation of the xenobiotic-induced impairment resulting in the activation and silencing of specific genes. Materials and methods Individuals of Atlantic salmon (Salmo salar) parr were exposed during 5 days to environmentally relevant concentrations of three representative pharmaceutical compounds with high consumption rates: the analgesic acetaminophen (54.77 ± 34.67 µg L⁻¹), the anticonvulsant carbamazepine (7.85 ± 0.13 µg L⁻¹), and the beta-blocker atenolol (11.08 ± 7.98 µg L⁻¹). Five immature males were selected for transcriptome analysis in brain tissues by means of a 17k salmon cDNA microarray. For this purpose, mRNA was isolated and reverse-transcribed into cDNA which was labeled with fluorescent dyes and hybridized against a common pool to the arrays. Lists of significantly up- and down-regulated candidate genes were submitted to KEGG (Kyoto Encyclopedia of Genes and Genomes) in order to analyze for induced pathways and to evaluate the usefulness of this method in cases of not completely annotated test organisms. Results Exposure during 5 days to environmentally relevant concentrations of the selected pharmaceutical compounds acetaminophen, carbamazepine, and atenolol produced differences in the expression of 659, 700, and 480 candidate genes, respectively. KEGG annotation numbers (KO annotations) were obtained for between 26.57% and 33.33% of these differently expressed genes per treatment in comparison to non-exposure conditions. Pathways that showed to be induced did not always follow previously reported targets or metabolic routes for the employed treatments; however, several other pathways have been found (four or more features) to be significantly induced. Discussion Energy-related pathways have been altered under exposure in all the selected treatments, indicating a possible energy budget leakage due to additional processes resulting from the exposure to environmental contaminants. Observed induction of pathways may indicate additional processes involved in the mode of action of the selected pharmaceuticals which may not have been detected with conventional methods like quantitative PCR in which only suspected features are analyzed punctually for effects. The employment of novel high-throughput screening techniques in combination with global pathway analysis methods, even if the organism is not completely annotated, allows the examination of a much broader range of candidates for potential effects of exposure at the gene level. Conclusions The continuously growing number of annotations of representative species relevant for environmental quality testing is facilitating pathway analysis processes for not completely annotated organisms. KEGG has shown to be a useful tool for the analysis of induced pathways from data generated by microarray techniques with the selected pharmaceutical contaminants acetaminophen, carbamazepine, and atenolol, but further studies have to be carried out in order to determine if a similar expression pattern in terms of fold change quantity and pathways is observed after long-term exposure. Together with the information obtained in this study, it will then be possible to evaluate the potential risk that the continuous release of these compounds may have on the environment and ecosystem functioning.

Background, aim, and scope Photochemical smog, characterized by high concentrations of O₃ and fine particles, is of great concern in the urban areas, in particular megacities and city clusters like the Pearl River Delta. Materials, methods, and results Ambient ozone (O₃) and its precursors were simultaneously measured at two sites in the Pearl River Delta, namely, Wan Qing Sha (WQS) in Guangzhou and Tung Chung (TC) in Hong Kong, from 23 October to 01 December 2007 in order to explore their potential relationship. Eight high O₃ episode days were identified at WQS and two at TC during the sampling campaign, indicating a more serious O₃ pollution in Guangzhou than in Hong Kong. An observation-based model was employed to determine the ozone-precursor relationship. At both sites, O₃ production was found to be volatile organic compound (VOC)-limited, which is consistent with previous observations. Anthropogenic hydrocarbons played a key role in O₃ production, while reducing nitric oxide emissions aided the buildup of O₃ concentrations. Among VOC species, the summed relative incremental reactivity (RIR) of the top 12 compounds accounted for 89% and 85% of the total RIR at WQS and TC, respectively, indicating that local photochemical O₃ formation can be mainly attributed to a small number of VOC species. Discussion and conclusions A large increment in both simulated HO₂ and O₃ concentrations was achieved with additional input of hourly carbonyl data. This suggested that apart from hydrocarbons, carbonyls might significantly contribute to the O₃ production in the Pearl River Delta.

Background, aims, and scope Heavy metal contaminants in environment, especially in drinking water, are always of great concern due to their health impact. Due to the use of heavy metals as catalysts during plastic syntheses, particularly antimony, human exposure to metal release from plastic bottles has been a serious concern in recent years. The aim and scope of this study were to assess metal contaminations leaching out from a series of recycling plastic bottles upon treatments. Methodology In this study, leaching concentrations of 16 metal elements were determined in 21 different types of plastic bottles from five commercial brands, which were made of recycling materials ranging from no. 1 to no. 7. Several sets of experiments were conducted to study the factors that could potentially affect the metal elements leaching from plastic bottles, which include cooling with frozen water, heating with boiling water, microwave, incubating with low-pH water, outdoor sunlight irradiation, and in-car storage. Results Heating and microwave can lead to a noticeable increase of antimony leaching relative to the controls in bottle samples A to G, and some even reached to a higher level than the maximum contamination level (MCL) of the US Environmental Protection Agency (USEPA) regulations. Incubation with low-pH water, outdoor sunlight irradiation, and in-car storage had no significant effect on antimony leaching relative to controls in bottle samples A to G, and the levels of antimony leaching detected were below 6 ppb which is the MCL of USEPA regulations. Cooling had almost no effect on antimony leaching based on our results. For the other interested 15 metal elements (Al, V, Cr, Mn, Co, Ni, Cu, As, Se, Mo, Ag, Cd, Ba, Tl, Pb), no significant leaching was detected or the level was far below the MCL of USEPA regulations in all bottle samples in this study. In addition, washing procedure did contribute to the antimony leaching concentration for polyethylene terephthalate (PET) bottles. The difference of antimony leaching concentration between washing procedure involved and no washing procedure involved (AC) was larger than zero for samples A to G. This interesting result showed that higher antimony concentration was detected in experiments with no washing procedures compared with those experiments with washing procedures. Our study results indicate that partial antimony leaching from PET bottles comes from contaminations on the surface of plastic during manufacturing process, while major antimony leaching comes from conditional changes. Conclusion The results revealed that heating and microwaving enhance antimony leaching significantly in PET plastic bottles. Plastic bottle manufacturers should consider the contaminations during manufacturing process and washing bottles before first use was strongly recommended to remove those contaminants.

Background, aim and scope Toxicity testing has become a suitable tool for wastewater evaluation included in several reference documents on best available techniques of the Integrated Pollution Prevention and Control (IPPC) Directive. The IPPC Directive requires that for direct dischargers as well as for indirect dischargers, the same best available techniques should be applied. Within the study, the whole effluent assessment approach of OSPAR has been applied for determining persistent toxicity of indirectly discharged wastewater from the metal surface treatment industry. Materials and methods Twenty wastewater samples from the printed circuit board and electroplating industries which indirectly discharged their wastewater to municipal wastewater treatment plants (WWTP) have been considered in the study. In all factories, the wastewater partial flows were separated in collecting tanks and physicochemically treated in-house. For assessing the behaviour of the wastewater samples in WWTPs, all samples were biologically pretreated for 7 days in the Zahn-Wellens test before ecotoxicity testing. Thus, persistent toxicity could be discriminated from non-persistent toxicity caused, e.g. by ammonium or readily biodegradable compounds. The fish egg test with Danio rerio, the Daphnia magna acute toxicity test, the algae test with Desmodesmus subspicatus, the Vibrio fischeri assay and the plant growth test with Lemna minor have been applied. All tests have been carried out according to well-established DIN or ISO standards and the lowest ineffective dilution (LID) concept. Additionally, genotoxicity was tested in the umu assay. The potential bioaccumulating substances (PBS) were determined by solid-phase micro-extraction and referred to the reference compound 2,3-dimethylnaphthalene. Results The chemical oxygen demand (COD) and total organic carbon (TOC) values of the effluents were in the range of 30-2,850 mg L⁻¹ (COD) and 2-614 mg L⁻¹ (TOC). With respect to the metal concentrations, all samples were not heavily polluted. The maximum conductivity of the samples was 43,700 µS cm⁻¹ and indicates that salts might contribute to the overall toxicity. Half of the wastewater samples proved to be biologically well treatable in the Zahn-Wellens test with COD elimination above 80%, whilst the others were insufficiently biodegraded (COD elimination 28-74%). After the pretreatment in the Zahn-Wellens test, wastewater samples from four (out of ten) companies were extremely ecotoxic especially to algae (maximum LIDA = 16,384). Three wastewater samples were genotoxic in the umu test. Applying the rules for salt correction of test results as allowed in the German Wastewater Ordinance, only a small part of toxicity could be attributed to salts. Considering the PBS, wastewater from the metal surface treatment industry exhibited very low levels of PBS. In one factory, the origin of ecotoxicity has been attributed to the organosulphide dimethyldithiocarbamate (DMDTC) used as a water treatment chemical for metal precipitation. The assumption based on rough calculation of input of the organosulphide into the wastewater was confirmed in practice by testing its ecotoxicity at the corresponding dilution ratio after pretreatment in the Zahn-Wellens test. Whilst the COD elimination of DMDTC was only 32% in 7 days, the pretreated sample exhibited a high ecotoxicity to algae (LIDA = 1,536) and luminescent bacteria (LIDlb = 256). Discussion Comparative data from wastewater surveillance by authorities (data from 1993 to 2007) confirmed the range of ecotoxicity observed in the study. Whilst wastewater from the metal surface treatment industry usually did not exhibit ecotoxicity (median LID 1-2), the maximum LID values reported for the algae, daphnia and luminescent bacteria tests were very high (LIDA up to 3,072, LIDD up to 512 and LIDlb up to 2,048). DMDTC was found to be one important source of ecotoxicity in galvanic wastewater. DMDTC is added in surplus, and according to the supplier, the amount in excess should be detoxified with ferric chloride or iron sulphate. The operator of one electroplating company had not envisaged a separate treatment of the organosulphide wastewater but was assuming that excess organosulphide would be bound by other heavy metals in the sewer. DMDTC degrades via hydrolysis to carbon disulfide (which is also toxic to animals and aquatic organisms), carbonyl sulphide, hydrogen sulphide and dimethylamine, but forms complexes with metals which stabilise the compound with respect to transformation. Although no impact on the WWTP is expected, the question arises whether the organosulphide is completely degraded during the passage of the WWTP. Conclusions and recommendations The results show that the organic load of wastewater from the electroplating industry has been underestimated by focussing on inorganic parameters such heavy metals, sulphide, cyanide, etc. Bioassays are a suitable tool for assessing the ecotoxicological relevance of these complex organic mixtures. The proof of biodegradability of the organic load (and its toxicity) can be provided by the Zahn-Wellens test. The environmental safety of water treatment chemicals should be better considered. The combination of the Zahn-Wellens test followed by the performance of ecotoxicity tests turned out to be a cost-efficient suitable instrument for the evaluation of indirect dischargers and considers the requirements of the IPPC Directive.

INTRODUCTION: In this work, we propose an innovative application of laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) as a methodological approach for the chemical characterisation of black crusts on stone monuments, associated with traditional micro-morphological (optical and scanning electron microscopy) and infrared spectroscopic techniques (FTIR). METHODS: This new approach was tested on black crusts developing on two marble substrates, one, the columns of the San Cosimato cloister in Rome, and the other, a sculpture representing an angel, located in Pessano con Bornago, a small industrial town near Milan. DISCUSSION: The main aim of this study was to develop and test the reliability of the LA-ICP-MS analytical method on black crusts and to explore the idea that trace element concentrations in black crusts can be applied to investigate their origin and the relations between concentrations of polluting elements in black crusts and environmental conditions. CONCLUSION: The results obtained by applying traditional techniques find considerable support in the innovative method used here, which could determine the concentrations of a large number of trace elements (including heavy metals) in the black crusts examined, and thus could also be used as a reliable indicator of environmental pollution.

Purpose The environmental issues caused by the municipal solid waste disposal are becoming a worldwide concern. Methods We studied the situations both domestically and abroad by the strategic environmental assessment (SEA) approach and also conducted comprehensive evaluations of garbage disposal in Changchun City. Results On the basis of this study, we found that SEA is of great importance in the municipal solid waste disposal. Moreover, with the rapid socioeconomic development of Changchun City, municipal solid waste production increases on an annual basis, and thus, good waste management planning is of great significance. Conclusions Considering the situation of the economic development of Changchun City, garbage disposal was handled mainly in the major sanitary landfills with appropriate use of incineration technology. This plan is environmentally friendly at a relatively high degree and has met the requirements of minimum investment. It also takes into account the requirements of the development of incineration technology. Regarding environmental pollution in terms of groundwater pollution and atmospheric pollution, this plan is a feasible one by meeting various requirements with low environmental impact among the three plans discussed in this study.

Introduction Field experiments at the Shenyang Experimental Station of Ecology were conducted to study the adsorption, accumulation, and remediation of heavy metals by poplar and larch grown in artificially contaminated soil. Materials and methods The soil was spiked with a combination of Cd, Cu, and Zn at concentrations of 1.5, 100, and 200 mg·kg⁻¹, respectively. Results The results showed that the biomass of poplar (Populus canadensis Moench) was lower by 26.0% in the soil spiked with a mixture of Cd, Cu, and Zn, compared with the control. Concentrations of Cd in poplar leaf and Cu in poplar roots in the treated soil were 4.11 and 14.55 mg kg⁻¹, respectively, which are much greater than in corresponding controls. The migration of heavy metals in woody plant body was in the order Cd > Zn > Cu. Poplar had higher metal concentrations in aboveground tissues and a higher biomass compared with larch of the same age and therefore is potentially more suitable for remediation. In the heavy metal-polluted soil of this study, phytoremediation by poplar may take 56 and 245 years for Cd and Cu, respectively, for meeting the soil standards of heavy metals, and the corresponding phytoremediation times by larch would take 211 and 438 years. Conclusion The research findings could be used as a basis to develop ecological engineering technologies for environmental control and remediation of pollution caused by heavy metals in soils.