Background, aim, and scope Decabromodiphenyl ether (DecaBDE) is used as an additive flame retardant in polymers. It has become a ubiquitous environmental contaminant, particularly abundant in abiotic media, such as sediments, air, and dust, and also present in wildlife and in humans. The main DecaBDE constituent, perbrominated diphenyl ether (BDE-209), is susceptible to transformations as observed in experimental work. This work is aimed at identifying and assessing the relative amounts of products formed after UV irradiation of BDE-209. Materials and methods BDE-209, dissolved in tetrahydrofuran (THF), methanol, or combinations of methanol/water, was exposed to UV light for 100 or 200 min. Samples were analyzed by gas chromatography/mass spectrometry (electron ionization) for polybrominated diphenyl ethers (PBDEs), dibenzofurans (PBDFs), methoxylated PBDEs, and phenolic PBDE products. Results The products formed were hexaBDEs to nonaBDEs, monoBDFs to pentaBDFs, and methoxylated tetraBDFs to pentaBDFs. The products found in the fraction containing halogenated phenols were assigned to be pentabromophenol, dihydroxytetrabromobenzene, dihydroxydibromodibenzofuran, dihydroxytribromodibenzofuran, and dihydroxytetrabromodibenzofuran. The PBDEs accounted for approximately 90% of the total amount of substances in each sample and the PBDFs for about 10%. Discussion BDE-209 is a source of PBDEs primarily present in OctaBDEs but also to some extent in PentaBDEs, both being commercial products now banned within the EU and in several states within the USA. It is notable that OH-PBDFs have not been identified or indicated in any of the photolysis studies performed to date. Formation of OH-PBDFs, however, may occur as pure radical reactions in the atmosphere. Conclusions Photolysis of decaBDE yields a wide span of products, from nonaBDEs to hydroxylated bromobenzenes. It is evident that irradiation of decaBDE in water and methanol yields OH-PBDFs and MeO-PBDFs, respectively. BDE-202 (2,2',3,3',5,5',6,6'-octabromodiphenyl ether) is identified as a marker of BDE-209 photolysis. Recommendations and perspectives BDE-209, the main constituent of DecaBDE, is primarily forming debrominated diphenyl ethers with higher persistence which are more bioaccumulative than the starting material when subjected to UV light. Hence, DecaBDE should be considered as a source of these PBDE congeners in the environment.

Background, aim, and scope Endosulfan, an organochlorine pesticide (OCP), is genotoxic in mammalian cells and generally considered to be toxic and classified by the World Health Organization and the US Environmental Protection Agency as priority pollutants and a nominator for inclusion in a future iteration of the persistent organic pollutants treaty. Endosulfan is a currently used pesticide and still being used worldwide. The general trend of total global endosulfan use has increased continuously since the first year when this pesticide was applied. It is critical to create national endosulfan usage/emission inventories for China to carry out source-receptor relation analysis, risk assessment, and other research related to endosulfan in this country. Chinese inventories have been published for some OCPs, such as technical HCH and lindane, DDT, and chlordane; for endosulfan, however, there has not been any usage inventory available on any scales (national or provincial), although endosulfan has been widely used since 1994 in this country. This is the first part of the work. The goal of this paper is to quantify the historical production and usage of endosulfan in China and to compile gridded historical usage inventories of endosulfan for this country. Based on these usage inventories, emission and residue inventories will be created, which is the goal of the second part of the work. Materials and methods Due to the lack of national production and usage information of endosulfan in China, a method to estimate the use of endosulfan was developed. First, information of crops on which endosulfan is applied and average endosulfan use and annual application frequencies of endosulfan on these crops were collected. Secondly, usage of endosulfan on each crop was estimated using the national cropland area for each province from Chinese government reports. Finally, with the help of GIS (geographic information system), the usage data of this insecticide was allocated to a grid system, with a 1/4° longitude by 1/6° latitude resolution, with a size for each grid cell of approximately 25 km by 25 km. Results and discussion The use of endosulfan in agriculture in China started on cotton in 1994, and on wheat, tea, tobacco, apples, and other fruits in 1998. Endosulfan usage on cotton, wheat, tea, tobacco, and apples in China has been estimated to be approximately 25,700 t between 1994 and 2004. The province with the highest usage of endosulfan is Henan Province, with a total usage reaching 4,000 t, followed by the uses in Xinjiang Autonomous Region (3,200 t), Shandong Province (3,000 t), Hebei Province (2,100 t), and Anhui Province (1,900 t). Gridded usage inventories of endosulfan at a 1/4° longitude by 1/6° latitude resolution have been created, which indicate that the intensive endosulfan use was in the south of Hebei Province, west of Shandong Province, east of Henan Province, north of Anhui Province, east of Jiangsu Province, and some areas in Yunnan Province and Xinjiang Autonomous Region. General agreement has been found between the usage data from our estimation and the small amount of usage data published in China. Conclusions This is the first national gridded endosulfan usage inventory produced for China. The annual applications of endosulfan from 1994 to 2004 in China were estimated based on the total areas of major crops, on which endosulfan was applied, and spatial distribution of the application was generated at provincial and prefecture levels. With the help of GIS, endosulfan usage based on prefecture was transferred to a 1/4° longitude by 1/6° latitude gridding system. The satisfaction of the inventories was supported by the consistence between the estimation of the annual usage and the reported annual production of endosulfan. Recommendations and perspectives This gridded endosulfan usage inventory created in this study will be improved upon availability of new information of endosulfan. The usage inventories can be used to create gridded emission and residue inventories for this insecticide. It is believed that this work will pave the way for further endosulfan studies in China and beyond.

Background, aim, and scope Lindane, technically 1, 2, 3, 4, 5, 6-hexachlorocyclohexane (γ- HCH), is the most commonly detected organochlorine pesticide from diverse environmental compartments. Currently, India is the largest consumer and producer of lindane in the world. The production of lindane results in the generation of large quantities of waste HCH isomers (mainly α-, β- and δ-). All these isomers are toxic and have a long-range environmental transport potential. The aim of this study was to monitor the seasonal variation of HCH isomers in an open soil-plant-rhizospheric soil system of a contaminated industrial area. For this, selected plant species and their rhizospheric soil (soil samples collected at a depth range of 0-45 cm near to the root system) and open soil samples (soil samples collected (0-30 cm depth) from 1-1.5 m away from the plant root system) were collected for 2 years (two summer seasons and two winter seasons). Materials and methods Seven plant species along with their rhizospheric soil and open soil samples were collected seasonally from different parts of the industry. Plant samples were separated into root, leaf and stem. HCH isomers in plant and soil samples were extracted by matrix solid-phase dispersion extraction (MSPD) and Soxhlet extraction, respectively, followed by GC-ECD. The seasonal difference in occurrence of HCH isomers in plant samples with their respective soil-system was studied by multivariate statistical approaches. Results The mean concentration of total HCH in plant samples, open soil and rhizospheric soil samples were found in the range of 14.12 to 59.29 mg kg⁻¹; 38.64 to 104.18 mg kg⁻¹ and 8.38 to 26.05 mg kg⁻¹, respectively. Cluster grouping reveals that S. torvum and W. somnifera can accumulate more HCH than other studied species. Discussion There was a marked seasonal difference in the occurrence of HCH isomers in plant samples (p < 0.05) and open soil samples (p < 0.01). Comparatively higher levels of HCH isomers were detected from plant samples during summer, while higher levels of HCH isomers were detected from soil samples during the winter season. There was no significant difference in seasonal variation of HCH isomers in rhizospheric soil samples; however, total HCH in rhizospheric soil samples were 4 to 5-fold lower than the open soil samples. The total concentration of HCH isomers in roots is linearly related to their rhizospheric HCH level. Conclusions HCH isomers were detected in open soil, plants and rhizospheric soil samples. Monitoring studies clearly revealed that the above-mentioned industrial area is contaminated with all major isomers of HCH. Occurrence of all these isomers in the study area point out the lack of sustainable management practices of this industry for protecting the area from hazardous waste. The analytical results confirmed that accumulation depends upon the plant species, soil and climatic conditions. Recommendations and perspectives Recently, α-, β- and γ-HCH have been nominated by the POPs Reviewing Committee for inclusion into the Stockholm Convention to address the HCH contamination on a global level. Therefore, there is an urgent need to stop the production of lindane and remediate contaminated soil sites. Based on the monitoring studies, the promising species like W. somnifera and S. torvum may be selected for the on-site phytoremediation of HCH-contaminated soil. The mismanagement of HCH residues from the organochlorine industry and their contemporary relevance often after decades of their deposition is one key example demonstrating the necessity to evaluate the waste deposits of the respective organochlorine productions and need for a strict waste management, and the necessity of an integrated pollution prevention and control strategy for the whole organochlorine industry including also the developing countries.

Background, aim, and scope Dissolved organic matter, measured as dissolved organic carbon (DOC), is an important component of aquatic ecosystems and of the global carbon cycle. It is known that changes in DOC quality and quantity are likely to have ecological repercussions. This review has four goals: (1) to discuss potential mechanisms responsible for recent changes in aquatic DOC concentrations; (2) to provide a comprehensive overview of the interactions between DOC, nutrients, and trace metals in mainly boreal environments; (3) to explore the impact of climate change on DOC and the subsequent effects on nutrients and trace metals; and (4) to explore the potential impact of DOC cycling on climate change. Main features We review recent research on the mechanisms responsible for recent changes in aquatic DOC concentrations, DOC interactions with trace metals, N, and P, and on the possible impacts of climate change on DOC in mainly boreal lakes. We then speculate on how climate change may affect DOC export and in-lake processing and how these changes might alter nutrient and metal export and processing. Furthermore, the potential impacts of changing DOC cycling patterns on climate change are examined. Results It has been noted that DOC concentrations in lake and stream waters have increased during the last 30 years across much of Europe and North America. The potential reasons for this increase include increasing atmospheric CO₂ concentration, climate warming, continued N deposition, decreased sulfate deposition, and hydrological changes due to increased precipitation, droughts, and land use changes. Any change in DOC concentrations and properties in lakes and streams will also impact the acid-base chemistry of these waters and, presumably, the biological, chemical, and photochemical reactions taking place. For example, the interaction of trace metals with DOC may be significantly altered by climate change as organically complexed metals such as Cu, Fe, and Al are released during photo-oxidation of DOC. The production and loss of DOC as CO₂ from boreal lakes may also be affected by changing climate. Climate change is unlikely to be uniform spatially with some regions becoming wetter while others become drier. As a result, rates of change in DOC export and concentrations will vary regionally and the changes may be non-linear. Discussion Climate change models predict that higher temperatures are likely to occur over most of the boreal forests in North America, Europe, and Asia over the next century. Climate change is also expected to affect the severity and frequency of storm and drought events. Two general climate scenarios emerge with which to examine possible DOC trends: warmer and wetter or warmer and drier. Increasing temperature and hydrological changes (specifically, runoff) are likely to lead to changes in the quality and quantity of DOC export from terrestrial sources to rivers and lakes as well as changes in DOC processing rates in lakes. This will alter the quality and concentrations of DOC and its constituents as well as its interactions with trace metals and the availability of nutrients. In addition, export rates of nutrients and metals will also change in response to changing runoff. Processing of DOC within lakes may impact climate depending on the extent to which DOC is mineralized to dissolved inorganic carbon (DIC) and evaded to the atmosphere or settles as particulate organic carbon (POC) to bottom sediments and thereby remaining in the lake. The partitioning of DOC between sediments and the atmosphere is a function of pH. Decreased DOC concentrations may also limit the burial of sulfate, as FeS, in lake sediments, thereby contributing acidity to the water by increasing the formation of H₂S. Under a warmer and drier scenario, if lake water levels fall, previously stored organic sediments may be exposed to greater aeration which would lead to greater CO₂ evasion to the atmosphere. The interaction of trace metals with DOC may be significantly altered by climate change. Iron enhances the formation of POC during irradiation of lake water with UV light and therefore may be an important pathway for transfer of allochthonous DOC to the sediments. Therefore, changing Fe/DOC ratios could affect POC formation rates. If climate change results in altered DOC chemistry (e.g., fewer and/or weaker binding sites) more trace metals could be present in their toxic and bioavailable forms. The availability of nutrients may be significantly altered by climate change. Decreased DOC concentrations in lakes may result in increased Fe colloid formation and co-incident loss of adsorbable P from the water column. Conclusions Climate change expressed as changes in runoff and temperature will likely result in changes in aquatic DOC quality and concentration with concomitant effects on trace metals and nutrients. Changes in the quality and concentration of DOC have implications for acid-base chemistry and for the speciation and bioavailability of certain trace metals and nutrients. Moreover, changes in DOC, metals, and nutrients are likely to drive changes in rates of C evasion and storage in lake sediments. Recommendations and perspectives The key controls on allochthonous DOC quality, quantity, and catchment export in response to climate change are still not fully understood. More detailed knowledge of these processes is required so that changes in DOC and its interactions with nutrients and trace metals can be better predicted based on changes caused by changing climate. More studies are needed concerning the effects of trace metals on DOC, the effects of changing DOC quality and quantity on trace metals and nutrients, and how runoff and temperature-related changes in DOC export affect metal and nutrient export to rivers and lakes.

Background, aim, and scope Heavy metals such as lead are well known to cause harmful health effects. Especially children are particularly susceptible to increased levels of lead in their blood. It is also a fact that lead concentration is increasing in the environment due to increased anthropogenic activity. The risk of heavy metal contamination is pronounced in the environment adjacent to large industrial complexes. In a combined case study, the environmental pollution by heavy metals was related to children's health in the vicinity of an industrial area located 4 km south-east from Bucharest about 2 km east from the nearest town--Pantelimon. This site includes companies processing different, nonferrous solid wastes for recovery of heavy metals and producing different nonferrous alloys and lead batteries. In this paper, mainly the results of environmental sampling and analyses are summarized. Materials and methods Water, soil, and atmospheric deposition samples were collected from different locations within 3 km from the industrial area. For comparison, samples were also taken from Bucharest. Water samples were filtered (<0.45 μm), extracted by salpetric acid, and quantified by ICP-OES and ICP-MS. Soil samples were dried, sieved (<2 mm), extracted by aqua regia and analyzed by AAS. In order to quantify the atmospheric deposition, three kinds of permanently open collecting pots were used on nine different sites between August and November 2006. Results At most sampling locations, the heavy metal concentrations in soil decrease with increasing distance to the presumably major source of pollution. Highest heavy metal concentrations were found in 10-20 cm soil depths. There were also decreasing heavy metal concentrations for atmospheric deposition with increasing distance to the industrial site. In surface and groundwater samples, traces of zinc, copper and lead were detected. Discussion The heavy metal concentrations in soil were increased in the study area, mostly under legal action limits in low-concern areas (e.g., 1,000 mg Pb/kg dry soil), but often above action limits for high-concern areas (100 mg Pb/kg dry soil) such as populated areas. The soluble lead concentrations in water samples indicate a need for monitoring and assessing water quality in more detail. The results for atmospheric deposition showed increased dust precipitation and heavy metal loads in the study area compared to Bucharest. However, based on mass flow balance calculations, the actual atmospheric deposition of heavy metals must be much lower than it was in the past decades. Conclusions It was shown that highest lead values in water, soil and atmospheric deposition are rather to be found near the investigated industrial site than at the control sites in Bucharest. Our results correspond very well with results that show that children from Pantelimon have significantly increased lead concentrations in their blood compared to children in Bucharest. The increased lead contamination around the investigated industrial area is likely to have caused the increased exposure for children living in Pantelimon. Recommendations and perspectives In high-concern areas, such as found in populated areas, further measures have to be taken to avoid health risks for people living in these areas. The measures already taken to reduce emissions from the industrial site will help to avoid further increases in heavy metal concentrations. In areas with exceeded action limits, measures have to be taken as required by law. Detailed risk assessments could help to take necessary actions to protect public health in this area. The public should be informed about the potential hazards of eating plants grown in that area. Educational programs for schools, informing children about the contamination, should lead to a better understanding of environmental problems and a more sustainable behavior in the future.

Background, aims, and scope Since toxaphene (polychlorocamphene, polychloropinene, or strobane) mixtures were applied for massive insecticide use in the 1960s to replace the use of DDT, some of their congeners have been found at high latitudes far away from the usage areas. Especially polychlorinated bornanes have demonstrated dominating congeners transported by air up to the Arctic areas. Environmental fate modeling has been applied to monitor this phenomenon using parallel zones of atmosphere around the globe as interconnected environments. These zones, shown in many meteorological maps, however, may not be the best way to configure atmospheric transport in air trajectories. The latter could also be covered by connecting a chain of simple model boxes. We aim to study this alternative approach by modeling the trajectory chain using catchment boxes of our FATEMOD model. Polychlorobornanes analyzed in biota of the Barents Sea offered one case to study this modeling alternative, while toxaphene has been and partly still is used massively at southern East Europe and around rivers flowing to the Aral Sea. Materials and methods Pure model substances of three polychlorobornanes (toxaphene congeners P26, P50, and P62) were synthesized, their environmentally important thermal properties measured by differential scanning calorimetry, as evaluated from literature data, and their temperature dependences estimated by the QSPR programs VPLEST, WATSOLU, and TDLKOW. The evaluated property parameters were used to model their atmospheric long-range transport from toxaphene heavy usage areas in Ukraine and Aral/SyrDarja/AmuDarja region areas, through East Europe and Northern Norway (Finnmarken) to the Barents Sea. The time period used for the emission model was June 1997. Usual weather conditions in June were applied in the model, which was constructed by chaining FATEMOD model boxes of the catchment's areas along assumed maximal air flow trajectories. Analysis of the three chlorobornanes in toxaphene mixtures function as a basis for the estimates of emission levels caused by its usage. High estimate (A) was taken from contents in a Western product chlorocamphene and low estimate (B) from mean contents in Russian polychloroterpene products to achieve modeled water concentrations. Bioaccumulation to analyzed lipid of aquatic biota at the target region was estimated by using statistical calculation for persistent organic pollutants in literature. Results The results from model runs A and B (high and low emission estimate) for levels in sea biota were compared to analysis results of samples taken in August 1997 at Barents Sea. The model results (ng g⁻¹ lw): 4-95 in lipid of planktovores and 7-150 in lipid of piscivores, were in fair agreement with the analysis results from August 1997: 21-31 in Themisto libellula (chatka), 26-42 in Boreocadus saida (Polar cod), and 5-27 in Gadus morhua (cod) liver. Discussion The modeling results indicate that the application of chained simple multimedia catchment boxes on predicted trajectory is a useful method for estimation of volatile airborne persistent chemical exposures to biota in remote areas. For hazard assessment of these pollutants, their properties, especially temperature dependences, must be estimated by a reasonable accuracy. That can be achieved by using measurements in laboratory with pure model compounds and estimation of properties by thermodynamic QSPR methods. The property parameters can be validated by comparing their values at an environmental temperature range with measured or QSPR-estimated values derived by independent methods. The chained box method used for long-range air transport modeling can be more suitable than global parallel zones modeling used earlier, provided that the main airflow trajectories and properties of transported pollutants are predictable enough. Conclusions Long-range air transport modeling of persistent, especially photo-resistant organic compounds using a chain of joint simple boxes of catchment's environments is a feasible method to predict concentrations of pollutants at the target area. This is justified from model results compared with analytical measurements in Barents Sea biota in August 1997: three of six modeled values were high and the other three low compared to the analysis results. The order of magnitude level was similar in both modeled (planktovore and piscivore) and observed (chatka and polar cod) values of lipid samples. The obtained results were too limited to firm validation but are sufficient to justify feasibility of the method, which prompts one to perform more studies on this modeling system. Recommendations and perspectives For assessment of the risk of environmental damages, chemical fate determination is an essential tool for chemical control, e.g., for EU following the REACH rules. The present conclusion of applicability of the chained single-box multimedia modeling can be validated by further studies using analyses of emissions and target biota in various other cases. To achieve useful results, fate models built with databases having automatic steps for most calculations and outputs accessible to all chemical control professionals are essential. Our FATEMOD program catchments at environments and compound properties listed in the database represent a feasible tool for local, regional, and, according our present test results, for global exposure predictions. As an extended use of model, emission estimates can be achieved by reversed modeling from analysis results of samples corresponding to the target area.

Background, aim and scope Marine and coastal sediments can accumulate substantial concentrations of metals and hydrocarbons, yet the consequences of this contamination for exposed biota in situ can be difficult to establish. Here, we examine the hypothesis that exposure to contaminated sediments can lead to detrimental effects in sediment-dwelling species. The combination of chemical and biological assessment allows the identification of the impact of chemical contamination, and their use as assessment tools is becoming increasingly important. Materials and methods The study was applied to marine sediments from the Bay of Algeciras (S Spain) impacted by multiple, low-level contaminant inputs, and the Galician Coast (NW Spain), historically impacted by an oil spill (Prestige 2002), with two reference sites selected in UK and Spain. The common lugworm Arenicola marina was exposed in the laboratory for 14 days to the marine sediments, and a suite of biomarkers of sublethal toxicity was combined with analytical chemistry to test for relationships between sediment contamination and effect. Results Moderate to strong correlations between organics, metals, and biological responses were observed, with DNA damage as measured using the Comet assay forming the largest contribution toward the observed differences (p < 0.05). The responses of worms from sites experiencing different contamination loads were clearly distinguishable. Discussion We show how a combination of multibiomarkers with analytical chemistry can be used to investigate the toxicity of marine sediments, enabling the differentiation of sites showing different types of contamination. There are clear relationships in sublethal assays that can be related to the putative mode of toxicity of the contaminants. Conclusions The use of A. marina in this way provides a sensitive, holistic approach to sediment toxicity assessment, enabling comparisons between oil-polluted sites to be quantified. Recommendations and perspectives These tools provide a relatively simple, rapid, and economic way to test the environmental status of oil-contaminated sediment.

Background, aim and scope Nonylphenol (NP) can be detected in the aquatic environment all over the world. It is applied as a technical mixture of isomers of which 353-NP is the most relevant both in terms of abundance (about 20% of total mass) and endocrine potential. 353-NP is metabolised in sewage sludge. The aims of the present study were to determine and to compare the acute toxicity of t-NP, 353-NP and its metabolites as well as to discuss if the toxicity of 353-NP changes during degradation. Materials and methods 353-NP and two of its metabolites were synthesised. The zebrafish embryo test was performed according to standard protocols. Several lethal and non-lethal endpoints during embryonal development were reported. NOEL, LOEL and EC₅₀ were calculated. Results All tested compounds caused lethal as well as non-lethal malformations during embryo development. 353-NP showed a higher toxicity (EC₅₀ for lethal endpoints 6.7 mg/L) compared to its metabolites 4-(3.5-dimethyl-3-heptyl)-2-nitrophenol (EC₅₀ 13.3 mg/L) and 4-(3,5-dimethyl-3-heptyl)-2-bromophenol (EC₅₀ 27.1 mg/L). Discussion In surface water, concentrations of NP are far below the NOEC identified by the zebrafish embryo test. However, in soils and sewage sludge, concentrations may reach or even exceed these concentrations. Therefore, sludge-treated sites close to surface waters should be analysed for NP and its metabolites in order to detect an unduly high contamination due to runoff events. Conclusions The results of the present study point out that the toxicity of 353-NP probably declines during metabolisation in water, sediment and soil, but does not vanish since the major metabolites exhibit a clear toxic potential for zebrafish embryos. Recommendations and perspectives Metabolites of environmental pollutants should be included in the ecotoxicological test strategy for a proper risk assessment.

Background, aim and scope Agricultural landscapes comprise cultivated fields and semi-natural areas. Biological components of these compartments such as weeds, insect pests and pathogenic fungi can disperse sometimes over very large distances, colonise new habitats via insect flight, spores, pollen or seeds and are responsible for losses in crop yield (e.g. weeds, pathogens) and biodiversity (e.g. invasive weeds). The spatiotemporal dynamics of these biological components interact with crop locations, successions and management as well as the location and management of semi-natural areas such as roadverges. The objective of this investigation was to establish a modelling and simulation methodology for describing, analysing and predicting spatiotemporal dynamics and genetics of biological components of agricultural landscapes. The ultimate aim of the models was to evaluate and propose innovative cropping systems adapted to particular agricultural concerns. The method was applied to oilseed rape (OSR) volunteers playing a key role for the coexistence of genetically modified (GM) and non-GM oilseed rape crops, where the adventitious presence of GM seeds in non-GM harvests (AGMP) could result in financial losses for farmers and cooperatives. Material and methods A multi-year, spatially explicit model was built, using field patterns, climate, cropping systems and OSR varieties as input variables, focusing on processes and cultivation techniques crucial for plant densities and pollen flow. The sensitivity of the model to input variables was analysed to identify the major cropping factors. These should be modified first when searching for solutions limiting gene flow. The sensitivity to model processes and species life-traits were analysed to facilitate the future adaptation of the model to other species. The model was evaluated by comparing its simulations to independent field observations to determine its domain of validity and prediction error. Results The cropping system study determined contrasted farm types, simulated the current situation and tested a large range of modifications compatible with each farm to identify solutions for reducing the AGMP. The landscape study simulated gene flow in a large number of actual and virtual field patterns, four combinations of regional OSR and GM proportions and three contrasted cropping systems. The analysis of the AGMP rate at the landscape level determined a maximum acceptable GM OSR area for the different cropping systems, depending on the regional OSR volunteer infestation. The analysis at the field level determined minimum distances between GM and non-GM crops, again for different cropping systems and volunteer infestations. Discussion The main challenge in building spatially explicit models of the effects of cropping systems and landscape patterns on species dynamics and gene flow is to determine the spatial extent, the time scale, the major processes and the degree of mechanistic description to include in the model, depending on the species characteristics and the model objective. Conclusions These models can be used to study the effects of cropping systems and landscape patterns over a large range of situations. The interactions between the two aspects make it impossible to extrapolate conclusions from individual studies to other cases. The advantage of the present method was to produce conclusions for several contrasted farm types and to establish recommendations valid for a large range of situations by testing numerous landscapes with contrasted cropping systems. Depending on the level of investigation (region or field), these recommendations concern different decision-makers, either farmers and technical advisors or cooperatives and public decision-makers. Recommendations and perspectives The present simulation study showed that gene flow between coexisting GM and non-GM varieties is inevitable. The management of OSR volunteers is crucial for containing gene flow, and the cropping system study identified solutions for reducing these volunteers and ferals in and outside fields. Only if these are controlled can additional measures such as isolation distances between GM and non-GM crops or limiting the proportion of the region grown with GM OSR be efficient. In addition, particular OSR varieties contribute to limit gene flow. The technical, organisational and financial feasibility of the proposed measures remains to be evaluated by a multi-disciplinary team.

Background, aim, and scope The success of phytoextraction depends upon the identification of suitable plant species that hyperaccumulate heavy metals and produce large amounts of biomass using established agricultural techniques. In this study, the Mediterranean saltbush Atriplex halimus L., which is a C4 perennial native shrub of Mediterranean basin with an excellent tolerance to drought and salinity, is investigated with the main aim to assess its phytoremediation potential for Pb and Cd removal from contaminated soils. In particular, the influence of soil salinity in metal accumulation has been studied as there is notable evidence that salinity changes the bioavailability of metals in soil and is a key factor in the translocation of metals from roots to the aerial parts of the plant. Materials and methods Three pot experiments were conducted under greenhouse conditions for a 10-week period with A. halimus grown in soil artificially polluted with 20 ppm of Cd and/or 800 ppm of Pb and irrigated with three different salt solutions (0.0%, 0.5%, and 3.0% NaCl). Soil measurements for soil characterization were performed with the expiration of the first week of plant exposure to metals and NaCl, and at the end of the experimental period, chlorophyll content, leaf protein content, leaf specific activity of guaiacol peroxidase (EC 1.11.1.7), shoot water content, biomass, and Cd and Pb content in the plant tissues were determined. Additionally, any symptoms of metal or salt toxicity exhibited by the plants were visually noted during the whole experimental period. Results The experimental data suggest that increasing salinity increases cadmium uptake by A. halimus L. while in the case of lead there was not a clear effect of the presence of salt on lead accumulation in plant tissues. A. halimus developed no visible signs of metal toxicity; only salt toxicity symptoms were observed in plants irrigated with 3% NaCl solutions. Chlorophyll content, leaf protein content, shoot water content, and biomass were not negatively affected by the metals; instead, there was even an increase in the amount of photosynthetic pigments in plants treated with both metals and salinity. The specific activity of guaiacol peroxidase seems to have a general tendency for increase in plants treated with the metals in comparison with the respective controls but a statistically significant difference exists only in plants treated with the metal mixture and saline conditions. Discussion The data revealed that lead and cadmium accumulation in plant tissues was kept generally at low levels. Salinity was found to have a positive effect on cadmium uptake by the plant and this may be related to a higher bioavailability of the metal in soil due to decreased Cd sorption on soil particles. On the other hand, salinity did not influence in a clear way the uptake of Pb by the plant probably because of lead's limited mobility in soils and plant tissues. Cd and Pd usually decrease the chlorophyll content and biomass and change water relations in plants; however, A. halimus was found not to be affected indicating that it is a Cd- and Pb-tolerant plant. Guaiacol peroxidase activity as one of the parameters expressing oxidative damage and extent of stress in plants was not generally found to be significantly affected under the presence of metals in most plants suggesting that the extent of stress in plants was minimal, while only for plants treated with the metal mixture and low salinity the enzyme activity was elevated confirming that this enzyme serves as an antioxidative tool against the reactive oxygen species produced by the metals. Conclusions Atriplex halimus L. is a Pb- and Cd-tolerant plant but metal concentrations achieved in plant tissues were kept generally at low levels; however, metal accumulation in shoots, especially for Cd, considered together with its high biomass production, rapid growth, and deep root system able to cope with poor structure and xeric characteristics of several polluted soils suggest that this plant deserves further investigation. Recommendations and perspectives Phytoextraction by halophytes is a promising alternative for the remediation of heavy metal contaminated sites affected by salinity since saline depressions often indicate sites of industrial effluents accumulation, contaminated by heavy metals, including Pb and Cd. Halophytes are also promising candidates for the removal of heavy metals from non-saline soils. Furthermore, the use of such plants can be potentially viewed as an alternative method for soil desalination where salt is removed from the soil instead of being washed downwards by water or other solutions.