Highways are major, open and dynamic sources of contaminants that present a risk to adjacent agricultural soils. Urban and peri-urban soils are particularly at risk because of a greater density of nearby highways with high traffic volumes. In developing economies, these soils support valuable food production and income, while in more developed economies there is a growing interest in urban food production. This commentary highlights the need to better characterise the sources, pathways to and impacts of highway contaminants on agricultural soils and it suggests research priorities. Soil contamination from highways includes metals, toxic organic pollutants and plastics (including large amounts of tyre dust). Contaminants from vehicle emissions and from wear of vehicles and highways are transferred to soil in airborne particulates, dust, splash, spray and runoff. Contamination is greatest near to the highway edge but can extend to >50m. Levels of metals including As, Cd, Cr, Cu, Pb, Ni, Zn in some soils adjacent to highways may exceed thresholds above which there is a potential risk of harm to food production. Elevated levels of non-threshold carcinogens (e.g. polycyclic aromatic hydrocarbons (PAHs)) in soil adjacent to highways are widely reported, with significant attribution to highway emissions. Mitigation options include improved vehicle design and performance, porous asphalt pavements, physical and vegetative barriers and better drainage. Research priorities include: (1) targeted soil monitoring to identify where highway contamination already presents a significant risk of harm to food production and to identify and assess trends in response to mitigation measures; (2) studies to assess the role of tyre particulate in transporting and releasing contaminants that are hazardous to soil (3) assessment of the risk to soil from pesticides used in highway maintenance; (4) analysis to inform a new emphasis on controlling soil pollution by innovative highway design and maintenance.

The influence of nitrogen (N) deposition on forest ecosystems largely depend on the N status. Developing threshold and practical indicators for N saturation in subtropical forests, with extremely high N deposition, would both enhance forest management and the assessments of global N balance and carbon (C) sequestration. Here, we quantified the N mass balance and assessed current N status at a number of subtropical forest sites in South China, using both N content, C/N ratio, and 15N natural abundance (δ15N) as potential indicators of N saturation. Among the studied sites, N deposition ranged from 13.8 to 113 kg N ha−1 yr−1 in throughfall, and was dominated by ammonium (NH4+). The threshold for N leaching in subtropical forest was first found to be 26–36 kg N ha−1 yr−1, which was 160% higher than in temperate forest (based on prescribed minimum). This indicates that critical parameter inputs in global models of the impact of N deposition are in need of revision, based on specific ecosystem characteristics. We found a critical C/N ratio of 20 for the O/A horizon as indicator of N saturation. Foliar N content and δ15N were positively correlated with N deposition and were well suited to indicate regional N status. The δ15N enrichment factor (Ɛfoli/So2, δ15Nfoliage - δ15NSoil2) was between −10‰ and −1‰, and had similar trend to those obtained from other regions with increasing N deposition. These suggest that the enrichment factor could be used to investigate the influence of N deposition in forest ecosystems, regardless of spatial heterogeneity in δ15N of N input, soil N availability and geomorphology.

Recently, there has been a growing concern that climate change may rapidly and extensively alter global ecosystems with unknown consequences for terrestrial and aquatic life. While considerable emphasis has been placed on terrestrial ecology consequences, aquatic environments have received relatively little attention. Limited knowledge is available on the biological effects of increments of seawater temperature and pH decrements on key ecological species, i.e., primary producers and/or organisms representative of the basis of the trophic web. In the present study, we addressed the biological effects of global warming and ocean acidification on two model organisms, the microbenthic marine ciliate Euplotes crassus and the green alga Dunaliella tertiocleta using a suite of high level ecological endpoint tests and sub-lethal stress measures. Organisms were exposed to combinations of pH and temperature (TR1: 7.9[pH], 25.5 °C and TR2: 7.8[pH], 27,0 °C) simulating two possible environmental scenarios predicted to occur in the habitats of the selected species before the end of this century. The outcomes of the present study showed that the tested scenarios did not induce a significant increment of mortality on protozoa. Under the most severe exposure conditions, sub-lethal stress indices show that pH homeostatic mechanisms have energetic costs that divert energy from essential cellular processes and functions. The marine protozoan exhibited significant impairment of the lysosomal compartment and early signs of oxidative stress under these conditions. Similarly, significant impairment of photosynthetic efficiency and an increment in lipid peroxidation were observed in the autotroph model organism held under the most extreme exposure condition tested.

High levels of phthalates in name-brand cosmetics products have raised concerns about phthalate exposure and the associated risk for cosmetics sales clerks. We assessed the exposure and risk of phthalates in 23 cosmetics, 4 perfume, and 9 clothing department store sales clerks. We collected 108 urine samples pre- and post-shift and analyzed for phthalate monoesters through liquid chromatography–electrospray ionization–tandem mass spectrometry. Phthalates in 32 air samples were collected and analyzed through gas chromatography–mass spectrometry. Demographic characteristics and information on the exposure scenarios were obtained through questionnaires. Principal component analysis, cluster and risk analysis were applied to identify the exposure profile and risk of phthalate.Median post-shift levels of urinary mono-2-ethylhexyl phthalate (MEHP) and monomethyl phthalate (MMP) were significantly higher than the corresponding pre-shift levels in cosmetics group (53.3 vs. 30.9 μg/g-c for MEHP; 34.4 vs. 22.5 μg/g-c for MMP; both P < 0.05) and the post-shift levels of urinary MMP was significantly higher than the corresponding pre-shift levels in perfume group (26.6 vs. 14.9 μg/g-c, P < 0.05). Median levels of air diethyl phthalate (DEP) in cosmetics (1.77 μg/m³) and perfume (1.75 μg/m³) groups and di-(2-ethylhexyl) phthalate (DEHP) in perfume group (6.98 μg/m³) were higher than those in clothing group (DEP: 0.89; DEHP: 2.16 μg/m³). Over half of cosmetic (70%) and perfume sale clerks had exceeded cumulative risk of phthalate exposure for anti-androgenic effect. We concluded that cosmetic and perfume workers had increased risks of reproductive or hepatic effects for DBP and DEHP exposure. We suggest that not only inhalation but dermal exposure is important route of phthalate exposure for cosmetics and perfume workers.

Assessing ozone (O3) risk to vegetation is crucial for informing policy making. Soil nitrogen (N) and phosphorus (P) availability could change stomatal conductance which is the main driver of O3 uptake into a leaf. In addition, the availability of N and P could influence photosynthesis and growth. We thus postulated that the sensitivity of plants to O3 may be changed by the levels of N and P in the soil. In this study, a sensitive poplar clone (Oxford) was subject to two N levels (N0, 0 kg N ha−1; N80, 80 kg N ha−1), three P levels (P0, 0 kg P ha−1; P40, 40 kg P ha−1; P80, 80 kg P ha−1) and three levels of O3 exposure (ambient concentration, AA; 1.5 × AA; 2.0 × AA) for a whole growing season in an O3 free air controlled exposure (FACE) facility. Flux-based (POD0 to 6) and exposure-based (W126 and AOT40) dose-response relationships were fitted and critical levels (CLs) were estimated for a 5% decrease of total annual biomass. It was found that N and P availability modified the dose-response relationships of biomass responses to O3. Overall, the N supply decreased the O3 CLs i.e. increased the sensitivity of poplar to O3. Phosphorus alleviated the O3-caused biomass loss and increased the CL. However, such mitigation effects of P were found only in low N and not in high N conditions. In each nutritional treatment, similar performance was found between flux-based and exposure-based indices. However, the flux-based approach was superior, as compared to exposure indices, to explain the biomass reduction when all nutritional treatments were pooled together. The best O3 metric for risk assessments was POD4, with 4.6 mmol m−2 POD4 as a suitable CL for Oxford poplars grown under various soil N and P conditions.

The potential impact of exposure to polychlorinated biphenyls (PCBs) on the health and survival of cetaceans continues to be an issue for conservation and management, yet few quantitative approaches for estimating population level effects have been developed. An individual based model (IBM) for assessing effects on both calf survival and immunity was developed and tested. Three case study species (bottlenose dolphin, humpback whale and killer whale) in four populations were taken as examples and the impact of varying levels of PCB uptake on achievable population growth was assessed. The unique aspect of the model is its ability to evaluate likely effects of immunosuppression in addition to calf survival, enabling consequences of PCB exposure on immune function on all age-classes to be explored. By incorporating quantitative tissue concentration-response functions from laboratory animal model species into an IBM framework, population trajectories were generated. Model outputs included estimated concentrations of PCBs in the blubber of females by age, which were then compared to published empirical data. Achievable population growth rates were more affected by the inclusion of effects of PCBs on immunity than on calf survival, but the magnitude depended on the virulence of any subsequent encounter with a pathogen and the proportion of the population exposed. Since the starting population parameters were from historic studies, which may already be impacted by PCBs, the results should be interpreted on a relative rather than an absolute basis. The framework will assist in providing quantitative risk assessments for populations of concern.

In vitro assays act as surrogate measurements of relative bioavailability (RBA) for inorganic contaminants. The values derived from these assays are routinely used to refine human health risk assessments (HHRA). Extensive in vitro research has been performed on three major inorganic contaminants; As, Cd and Pb. However, the majority of these studies have evaluated the contaminants individually, even in cases when they are found as co-contaminants. Recently, in vivo studies (animal model) have determined that when the three aforementioned contaminants are present in the same soil matrix, they have the ability to influence each other's individual bioavailability. Since in vitro assays are used to inform HHRA, this study investigated whether bioaccessibility methods including the Solubility/Bioavailability Research Consortium (SBRC) assay, and physiologically based extraction test (PBET), have the ability to detect interactions between As, Cd and Pb. Using a similar dosing methodology to recently published in vivo studies, spiked aged (12 years) soil was assessed by evaluating contaminant bioaccessibility individually, in addition to tertiary combinations. In two spiked aged soils (grey and brown chromosols), there was no influence on contaminant bioaccessibility when As, Cd and Pb we present as co-contaminants. However, in a red ferrosol, the presence of As and Pb significantly decreased (p < 0.05) the bioaccessibility of Cd when assessed using gastric and intestinal phases of the SBRC assay and the PBET. Conceivable, differences in key physico-chemical properties (TOC, Fe, Al, P) between the study soils influenced contaminant interactions and bioaccessibility outcomes. Although bioaccessibility methods may not account for interactions between elements as demonstrated in in vivo models, in vitro assessment provides a conservative prediction of contaminant RBA under co-contaminant scenarios.

Mariculture sediment has been recognized as a major contributor of environmental antibiotic resistance genes (ARGs), which are challenging the treatment of infections worldwide. Both antibiotics and fishmeal are used in aquaculture, and each has the potential to facilitate ARG dissemination, however their combined impact on the sediment resistome and their relative contribution remain unclear. In this study, microcosms were exposed to varying concentrations of tetracycline with or without fishmeal (0.1% wt/wt) for 14 days. Sediment genomic DNA was analyzed using high throughput quantitative PCR and 16S rRNA gene amplicon sequencing to compare the contribution of fishmeal and tetracycline to antibiotic resistomes and bacterial communities in mariculture sediment. Sixty-seven ARGs were detected potentially correlating to resistance for several major antibiotics. Fishmeal, but not the dose of tetracycline, contributed to the significant increase of both ARG abundance and diversity in the sediment. Based on principle coordinate analysis and hierarchical clustering, ARGs were clustered into two groups depending on whether fishmeal was added. Aminoglycoside, macrolide–lincosamide–streptogramin b (MLSb) and tetracycline resistance genes were the most abundant when fishmeal was used, while a significant increase in mobile genetic element (MGE) abundance was also detected (P < 0.05). Meanwhile, bacterial community structures were detected with distinct patterns between the two groups (Adonis, P < 0.05). Using the Mantel test and partial least squares path modeling, we identified that sediment resistomes were significantly correlated with microbial community structures (P < 0.05) which were mainly driven by nutrients in fishmeal. Together our findings suggested that fishmeal plays a more important role than tetracycline in proliferation of ARGs in mariculture sediment. This study may provide new insights into the mitigation of ARG propagation in mariculture operations.

The application of the fungicide thiabendazole (TBZ) in fruit packaging plants (FPP) results in the production of effluents which are often disposed in adjacent field sites. These require remediation to prevent further environmental dispersal of TBZ. We assessed the bioaugmentation potential of a newly isolated TBZ-degrading bacterial consortium in a naturally contaminated soil (NCS) exhibiting a natural gradient of TBZ levels (12000, 400, 250 and 12 mg kg⁻¹). The effect of aging on bioaugmentation efficacy was comparatively tested in a soil with similar physicochemical properties and soil microbiota, which was artificially, contaminated with the same TBZ levels (ACS). The impact of bioaugmentation and TBZ on the bacterial diversity in the NCS was explored via amplicon sequencing. Bioaugmentation effectively removed TBZ from both soils at levels up to 400 mg kg⁻¹ but failed at the highest contamination level (12000 mg kg⁻¹). Dissipation of TBZ in bioaugmented samples showed a concentration-dependent pattern, while aging of TBZ had a slight effect on bioaugmentation efficiency. Bioaugmentation had no impact on the soil bacterial diversity, in contrast to TBZ contamination. Soils from the hotspots of TBZ contamination (12000 mg kg⁻¹) showed a drastically lower α-diversity driven by the dominance of β- and γ-proteobacteria at the expense of all other bacterial phyla, especially Actinobacteria. Overall, bioaugmentation with specialized microbial inocula could be an effective solution for the recovery of disposal sites contaminated with persistent chemicals like TBZ.

From December 1993 to January 1995 and from October 2009 to October 2010, a total of 320 and 365 daily samples of the PM2.5 were collected at a rural background site (National Atmospheric Observatory Košetice) in Central Europe. The PM2.5 samples were analyzed for 29 and 26 elements respectively by Particle-Induced X-ray Emission (PIXE) and water-soluble inorganic ions by Ion Chromatography (IC) in 2009/2010. The Positive Matrix Factorization (PMF) was applied to the chemical composition of PM2.5 to determine its sources. The decreasing trends of almost all elements concentrations, especially the metals regulated by the EU Directive (2004/107/EC) are evident. The annual median ratios indicate a decrease in concentrations of the PM2.5 elements. The slight increase of K concentrations and Spearman's rank correlation coefficient rs 0.09 K/Se points to a rise in residential wood combustion. The S concentrations are nearly comparable (higher mean in 2009/2010, while the annual median ratio is under 1). The five major source types in the mid-1990s were ascribed to brown coal combustion, oil combustion, sea salt and dust – long-range transport, re-suspended dust and black coal combustion. The industrial combustion of brown and/or black coal (rs 0.75 Se/As, rs 0.57 Ga/Ge and rs 0.20 As/Zn) and oil (rs 0.72 V/Ni) of the regional origin dominated. In the 1990s, the potential source regions were the border area of Czech Republic, German and Poland (brown coal), the Moravia-Silesia region at the Czech-Polish border (black coal), and Slovakia, Austria, Hungary, and the Balkans (oil). In 2009/2010, the apportioned sources were sulfate, residential heating, nitrate, industry, re-suspended dust, and sea salt and dust – long-range transport. The secondary sulfate from coal combustion and residential biomass burning (rs 0.96, K/K+) of local origin dominated.The declining trend of the elemental concentrations and change in the source pattern of the regional background PM2.5 in Central Europe between the mid-1990s and 2009/10 reflects the economic transformation and impact of stricter legislation in Central Europe.