The paper deals with monitoring results of nitrate nitrogen (NO3 --N) run-off in three small agricultural catchments in Latvia (Berze, Mellupite, and Vienziemite) during the period of 1995 - 2007. Continuous flow measurements and water sampling were carried out in two scales - catchment and drainage field. Water quality data was analyzed statistically to identify outliers at various intensity agricultural production systems. The results indicated that with increase of agriculture intensity outlying values are higher and scattered from the rest of the data set thereby the risk of NO3 --N leaching is higher. It can be explained by application of different rates of organic and inorganic fertilization. To analyze water discharge data, cumulative distribution was used. The results show that main part of the water discharge is observed from late autumn to spring, whereas in summer period it is low and stable. The dependence of NO3 --N concentrations on the discharge is expressed by Spearman's correlation coefficient - at catchment scale it is 0.37 in Vienziemite site, 0.39 - in Berze, and 0.44 in Mellupite. Calculated correlation coefficients are statistically reliable.

This article gives a review of modern networking technologies and standards used in the development of distributed control systems. Study of related scientific and professional literature has been performed, and basing on it a multi-level model of digital network structure in the field of small-scale autonomous combined power systems has been proposed. Necessity of integration of autonomous powering into SmartHouse systems and related distributed computing and networking issues are reflected as well. As there is a wide variety of industrial networking standards used, this review covers and groups more frequently used protocols and stacks from the view of OSI (Open Systems Interconnection) reference model and layers of industrial automation. The aim of this article is to give a reference-point in the development of distributed control systems in the field of small-scale autonomous power supply and integration of them in SmartHouse systems.

The negative impact of agricultural pollution with biogenic materials on surface water bodies is a relevant problem. This problem is addressed by limiting or prohibiting certain activities in the so called buffer areas. The biogenic materials are carried by surface or groundwater runoff. Water infiltration is influenced by the lithological composition of sediments. River basins of sandy lithological structure were selected throughout the territory of Lithuania. An installed system of lysimeters in the boreholes allowed monitoring the change of water quality of sediments over time. The migration patterns of nutrients where identified during the investigation in the spring, summer and autumn seasons.

The electricity consuming end-user profile has changed in latest years, due to development of new electrical devices with increased functionality and complexity. Also increasing number of electricity consuming equipment that is available to end-user, makes very hard to identify real electricity consumption of each device. The existing wall plug digital power meters are too expensive for long-term power metering of each consuming device. The article describes a different approach of power metering system that lowers the costs and price of needed metering equipment. A new concept of low-cost energy monitoring system with wireless communication is developed.

Cumulative air pollution – synergy between different pollutants and environmental factors is one of the hardest to evaluate factors in the air quality monitoring field. The evaluation of cumulative effects is hindered by a lack of verified analytical frameworks. Currently used methods are relatively simple and use statistical models with small fixed number of pollutants in association with different factors. There is almost no one solution for direct, on-site cumulative effect measurements. The alternative is the use of Cumulative Pollution Index (CPI) method – solution designed for cumulative effect calculation from bioindication and air quality measurement data. However, this method is completely new and has never been used in the air pollution evaluation activities. Therefore, the objective of this study was to evaluate the opportunity to use CPI method as a cumulative pollution evaluation tool in air quality monitoring by doing measurements of cumulative effect in several air quality measurement stations in two cities of Latvia – Liepaja and Riga. Results show that Cumulative Pollution Index method is not only usable in air quality monitoring as a tool for cumulative effect evaluation, but can reveal new facts about air pollution and ways how it affects human and ecosystem health, – such climatic and environmental factors as humidity and temperature are more important than interactions between individual pollutants and can be considered main elements in forming of cumulative pollution impact.

In society, discussions occasionally raise whether current level of wood cutting in Latvia is not too high to maintain sustainable forest industry and biodiversity. Cutting volumes for the state owned forests are calculated based on the model whose aim is to even the timber stock of each tree species in a long term period. The wood resource extraction in the private forests takes place according to free market conditions and depending on market prices. Therefore amount of round wood delivered from private forests can shift in a large range. The research had two main tasks. First task was to survey primary wood processing companies in Latvia and gather information about their round wood processing volumes, how their processing volumes divides between softwoods and hardwoods, dimensions of round wood companies demand for production and assortment of produced materials. Second task was to evaluate round wood utilization balance in the territory of Latvia and estimate if current use of timber resources in Latvia corresponds to amounts that are sustainable. Research results showed that consumption of softwood timber in Latvia is close to maximum to perform sustainable forestry, but consumption of hardwoods is possible to increase at least by 20–25%. Survey of primary wood processing companies showed that round wood processing volumes in Latvia vary from 6 to 7 million m3 annually and that large enterprises, which count only for 4% from total number of primary wood processing entities, process two thirds from annual round wood volume in country.

The aim of air pollution monitoring is a regular and continuous collection of information on air pollution to prevent hazards influencing ecosystem and its components, including humans. Nowadays, the main technology used for this purpose is electronic sensors. As they are designed for specific measurements, a lot of important factors cannot be evaluated – various pollutants diffusion or cumulative effect, exposure, dose, and bioaccumulation. As an alternative solution – bioindication – pollution level determination from its effect on certain indicator species can be used. So far potential usage of bioindication as current air pollution monitoring network’s equivalent solution has not been studied. Therefore, the aim of the research was to assess a variety of bioindication methods for air pollution determination and their applications in air pollution monitoring. During the research, commonly used bioindication methods based on their popularity in scientific literature in 2012 were selected, as well as they were assessed using theoretical analysis method in order to determine their strong and weak points in air pollution monitoring. Research results demonstrate that current bioindication methods are not suitable for monitoring purposes. Therefore, bioindication can be combined with citizen science approach. To incorporate citizen science approach in bioindication based air pollution monitoring, development of special, for this purpose designed bioindication methodology is needed.

The negative impact of agricultural pollution with biogenic materials on surface water bodies is a relevant problem. This problem is addressed by limiting or prohibiting certain activities in so called buffer areas. The biogenic materials are carried by surface or groundwater runoff. Water infiltration is influenced by the lithological composition of sediments. Its structure is determined by analyzing geological and geomorphological maps and by drilling boreholes in the selected area. With the help of boreholes the level of groundwater and chemical composition of the infiltrate can be assessed. An installed system of lysimeters and piezometers in the borehole allows monitoring the change of water quality and groundwater level in vertical level of sediments over time. The set of lysimeter boreholes allows to capture and mapping the spatial change of these parameters. This article presents the systematic and practical methodology of drilling the lysimetric boreholes of original construction and using long-term monitoring equipment for water quality.

Intrusion Detection Systems is defined as a component that analyses system and user operations in computer and network system to protect it from possible intrusions. Current intrusion detection technologies have several shortcomings. Applying mobile agents to intrusion detection design is step forward on better intrusion detection. Mobile-agent based distributed intrusion detection systems are very promising for the following reasons: reduction of data movement, load-balance, flexibility, fault-tolerance, detection of distributed attacks. Hybrid intrusion detection is defined by both the method used to detect attacks and the placement of the system on the network. Intrusion detection system may perform either misuse detection or anomaly detection and may be deployed as network-based or host-based system. This paper proposes to distribute classical intrusion detection model with mobile agents making an agent-based hybrid intrusion detection system. The proposed model can help detect simple intrusions in early stage and also distributed intrusions by monitoring several subjects installed on network. Main benefit from mobile agents in such system is ability to generate separate services for specific tasks and analyze unknown user patterns with several methods of artificial intelligence.

The research was conducted with the aim of studying the possibility of using automatic feeding stations for individual sheep (Ovis aries) feeding. The research was organized in 3 periods, in which 10–13 months old sheep – female only (1st research period), 6–10 months old sheep – female only (2nd research period) and 8–12 months old sheep – female only (3rd research period) were used. Part of the sheep did not visit the feeding station at all. Sequentially, over the research periods the percentage was 13%, 37% and 49%. Upon setting the concentrate daily ration 400 g per sheep, on the average the number of visits to the particular feeding station was 6.1 and 4.7 (sequentially in the 1st and 2nd research period). Upon increasing the concentrate ration amount up to 700 g per day, the average number of feeding station visits was 6.9 (in the 3rd research period). The number of visits to the automatic feeding station was varied (V is greater than 10%). Over the research period live weight of the sheep increased significantly (p ≤ 0.05) for the subgroups of animals which made visits to the feeding station regularly during the entire research period. In all research periods, the average daily concentrate intake (373.5 g in the 1st research period, 333.1 g in the 2nd research period and 581.2 g in the 3rd research period) was 93%, 83% and 83% respectively, of the maximum established feeding standard.