Field trials with the spring wheat (Triticum aestivum L.) were carried out on the experimental fields of Estonian University of Life Sciences in 2011. The yield quality (volume weight, 1000 kernel weight, falling number, gluten content, gluten index, gluten content in dry matter) of spring wheat was studied in cultivar ‘Vinjett’. The wheat was part of the five-year crop rotation experiment where red clover (Trifolium pratense L.), spring wheat, peas (Pisum sativum L.), potato (Solanum tuberosum L.) and barley (Hordeum vulgare L.) undersown with red clover were following each other. There were three treatments which followed the crop rotation. In one treatment mineral fertilizers and pesticides were used, but other two treatments were organic without any synthetic agrochemicals. In mineral fertilizing treatments, the background of P25 and K95 kg ha-1 the N amount varied from 0 to 150 kg haE-1. Herbicides Sekator and MCPA 750 were used in conventional part. The aim of this research was to study red clover’s after-effect and different N fertilizer amounts’ influence on the spring wheat yield quality. In treatments where no mineral fertilizers were used and which only followed the red clovers after effect had higher gluten index and gluten content in dry matter. Higher mineral nitrogen amounts and organic treatments decreased spring wheat 1000 kernel weights and volume weights. The wet gluten content and falling number increased with increase of the amount of mineral N.

Abstract Studies comparing slurry injection versus spreading have reported inconsistent results so far. The objective of the study was to compare two slurry application methods, injecting and spreading, in terms of influence on sward yields and leaching of nitrogen (N) and potassium (K) from grassland. The experiment was conducted from 2008 to 2011 at the Eerika Experimental Station, Estonian University of Life Sciences. Mini-lysimeters filled with loamy sand soil embedded in three swards (three-species grass mixture (Phleum pratense, Lolium perenne and Poa pratensis), grasses mixture with white clover (Trifolium repens), and grasses mixture with lucerne (Medicago sativa)) were used. Three annual nitrogen rates (60, 120, 180 kg haE-1) in conjunction with the two slurry application methods (injecting and spreading) were applied. Percolated water quantities, N and K content in leachate and the sward yield were measured. N leaching was significantly less with slurry injection while K leaching did not depend on slurry application method. N and K leaching was more affected by sward botanical composition and applied N rate and N:K ratio n slurry than by slurry application method. Sward yields did not depend significantly on slurry application method. Slurry injection is rational only in grasses sward when used N rates are above 120 kg haE-1 yrE-1. Slurry injection may have negative influence on the distribution of white clover in the grasses + white clover sward and thus lead to sward yield decrease.

Products of organic origin used in agriculture to reduce the application of artificial pesticides and fertilizers are investigated world-wide now. Composting organic fertilizers, plant residue and household waste, results in new products of organic origin. In several countries (USA, Russia, Belorussia, and some others), the role of earthworms in organic waste processing and the possible further use of this processed product have been investigated. In Latvia, similar investigations are few but they are needed. A goal of our investigation was to investigate the impact of extracts made from the products of organic origin on potato (Solanum tuberosum) tuber yield in biological crop production system. A field experiment was established at the State Stende Cereals Breeding Institute in 2011, using an early-maturing potato variety ‘Borodjanskij Rozovij’ suitable for growing both in conventional and organic production systems. Tubers or plants were treated with peat elixir and earthworm bio-humus extract obtained at different temperatures: +45 °C and +95 °C, and their mixtures. In total, 18 treatments and untreated control variant were included in the experiment. Tubers were treated just prior to planting, but potato plants were treated three times in season. In the first production year, the obtained potato tuber yield ranged 26.16-45.38 t haE-1 in treated plots, and 35.27 t haE-1 in untreated control plot. Data were subjected to analysis of variance. In 2011, tuber yield was significantly dependent on organic extracts applied, which increased the yield significantly (p is lee than 0.05) in four treatments, but in the rest of them significantly decreased if compared to control.

Oregano (Origanum vulgare L.) is one of the most popular spice and medicinal plants of untraditional horticulture in Latvia. Wild populations of this plant are too few. That is why it is necessary to cultivate oregano for keeping the biodiversity of Latvian nature. It is important to use local oregano genetic resources in agrocenosis as well as to get as rich and qualitative yield as possible. The aim of this research was to explore the parameters of oregano inflorescence in Latvia and to recommend the most productive clones for cultivation. In summer 2011, a total of 45 oregano clones from an ex situ collection of spice and medicinal plants of the Laboratory of Cultivated Plants and Apilogy (Jelgava, Strazdu Street 1) were analysed. Such inflorescence parameters as length and width were explored. The average length of inflorescence of all clones was 17.99 cm, and the average width was 5.74 cm. The results showed that the clone No 26 had the largest width of inflorescence (9.6 cm), but the clone No. 2 had the largest length of inflorescence (31.1 cm). Using oregano Draft Descriptor List, the inflorescence was characterized as short, medium or long. The variability between clones was significant (p is less than 0.05), but between samples of each clone - non-significant (p is greater than 0.05). It is recommended to grow oregano clones No. 2, 5 and 26 in agrocenosis as the most productive.

This paper discusses some aspects of introducing a new agricultural crop in Latvia – truffles Tuber spp. Truffles are mycorrhiza–forming mushrooms with edible fruit bodies developing in the upper layer of soil. In Latvia, there is a growing interest among farmers to start cultivate truffles. From several cultivated truffle species, the Burgundy truffle Tuber aestivum syn. T. uncinatum is the most suitable to cultivate in Latvia. There are both autochthonous and introduced tree species in Latvia, which are suitable for the Burgundy truffle cultivation and it is suggested to use Quercus robur, Corylus avellana, Tilia cordata and Fagus sylvatica. In order to find the regions in Latvia with the highest potential for successful Burgundy truffle cultivation, climate and soil characteristics had been co-analysed. By superimposing soil and climate maps of Latvia, the most suitable regions for truffle cultivation are situated in the central and southern part of the country. Considering the variability in soil composition even within regions in Latvia, it is thereafter also of great importance to investigate site-specific soil characteristics in order to find the most favourable grounds for truffle cultivation. Other truffle species which might be suitable for cultivation in the future are also discussed, as well as some general recommendations in establishing truffle orchards.

The aim of the present research was to evaluate the affect of genetic and environmental factors on the variability of the goat milk yield, fat and protein content in goat milk in Latvia. Data of 6067 lactation records from 2400 goats of six different breeds were analysed in the period of 2001 to 2010. The highest milk yield (662.7±14.58 kg) was obtained in 2002, the highest fat content (40.7±0.05 g kgE-1) – in 2004, but highest protein content (32.7±0.19 g kgE-1) – in 2008 (p is less than 0.05). Basically there are two goat breeds in Latvia: Latvian goats and Saanen goats. In the research, 3261 Latvian and 2032 Saanen goats in closed lactations were analysed. It was found that Saanen goats gave the highest milk yield (579.3±5.01 kg), but Alpine goats – the highest fat and protein content (respectively 41.7±0.63 and 32.3±0.30 g kgE-1; p is less than 0.05). It was observed that most of all the goats kidded in winter (2379) and spring (3378). The highest milk yield (583.8±7.39 kg) was determined for goats kidded in winter season, but the highest fat content (41.8±0.06) and protein content (32.3±0.03) – for goats kidded in summer season. The average milk yield in the first lactation (1636) was significantly lower than in the third lactation (578.0±8.34; p is less than 0.05) when the goats produced the highest milk yield in the research.

Advances in milk production and the expansion of dairy herds have increased the need for improved manure management and whole farm nutrient balance. It is well known in dairy management that the balanced feeding and holding technology is an important level by which milk production and milk composition can be modified. The objective of this study was to evaluate urea content and urea yield in different farms with different holding technologies. Four farms represent three cow breeds (Holstein Black and White, Latvian Brown, and cross breed XP). Individual cow milk samples (n=2740) were collected monthly from September 2009 to November 2010. Milk samples were analyzed for total protein, casein, fat, lactose, and urea content with instrumental infrared spectroscopy method. The average milk yield per cows in farms was significantly different (from 27.9 to 17.0 kg per control day). The urea content in cow milk was between 20.3 to 46.6 mg dLE-1. The average urea content in farms A, B and D was up to standard (from 15.0 to 30.0 mg dLE-1). In the farm C, average urea content ranged between 17.4 and 79.9 mg dLE-1, which indicated problems in feeding or management in the farm. It was established that milk urea content and yield significantly (p is less than 0.05) varied in farms with different dairy cow holding and feeding technologies. Urea content can be used to evaluate feed protein utilization in farms and predict environmental pollution.

Food and drinking water are the main sources of trace and major elements. Besides the elements that are vitally essential for living organisms and human health, food may contain the traces of potentially toxic elements. Environmental site specific impact is one of the influencing factors of elemental content in plants that is important issue also for quality of food crops. Quantitative content of several trace elements (e.g., Al, As, Cd, Co, Cr, Cu, Ni, Pb, Zn) detected in food crops reveal environmental background levels as well as it can be associated with unexpected food contamination. Current study involves quantitative analysis of more than 200 root vegetable samples (onions, carrots and potatoes) grown and collected in Latvia in the harvesting season of 2010. Within this study the quantitative analysis of vegetables for 9 elements (As, Cd, Co, Cr, Cu, Ni, Pb, Se, Zn) was performed. After the wet digestion of samples, the quantitative analysis was done by using inductively coupled plasma mass spectrometry (ICP-MS). Obtained results revealed wide ranges of trace elements in root vegetables, including potentially toxic elements. Comparison of element content in edible parts of vegetables and potato peel showed that a great part of elements (e.g., As, Co, Cr, Pb) is concentrated in peel; however, some elements (e.g., Cd, Se, Zn) are taken up by plants, and therefore may contaminate food more easily. Element transfer routes and their biochemistry is a complicated issue that is affected by natural environmental factors as well as by anthropogenic activities.

Carrots (Daucus carota L.) are a globally important vegetable crop providing a source of important nutritional compounds through their carotenoid content whilst adding flavour and texture to many diets across the world. The current research focuses on the evaluation of sugars, vitamin C and dietary fibre content in ‘Nante’ hybrid carrots. The research was accomplished on fresh in Latvia cultivated carrots harvested in Zemgale region in the first part of October 2011 and immediately used for experiments. Late-bearing hybrids of ‘Nante’ carrots were used for analysis: Nante/ Berlikum, Nante/Maestro, Nante/Forto, Nante/Bolero, and Nante/Champion. The major sugars (fructose, glucose and sucrose) were determined by applying the method of high performance liquid chromatography, vitamin C - by titration with 0.05 M iodine solution, and dietary fibre - using standard method No 985.29. In the present experiments it was found that there are significant differences in the sugar, vitamin C and dietary fibre content between different carrot hybrids. The highest content of total sugars was found in Nante/Maestro and Nante/Champion 7.99 g 100 gE-1 and 7.57 g 100 gE-1 hybrids in fresh weight, respectively. The lowest total sugars content was in Nante/Berlikum hybrid − 4.03 g 100 gE-1. Vitamin C content in carrot hybrid Nante/Maestro was the highest 17.61±0.17 mg 100 gE-1, but in hybrid Nante/Champion - the lowest 8.39±0.17 mg 100 gE-1 of fresh weight. The dietary fibre content in analysed carrot samples ranged from 34.25±0.47 g 100 gE-1 in Nante/Maestro to 25.78±1.54 g 100 gE-1 in Nante/Champion hybrids.

Triticale is an amphidiploid hybrid between wheat and rye having protein-rich grain. For expanding the range of bakery and pastry production in the world there are being developed various recipes for product enriching with fibre, especially b-glucan, proteins, vitamins and other nutrients for a healthier diet. It can be done making a flour blend from whole grain triticale, rye, hull-less barley, rice and maize flour. The aim of research was to evaluate the rheological properties of dough made from different cereals flour and flour blends. Whole grain flour of triticale, rye, hull-less barley, rice, maize and flour blends were used in this research. Flour blends were made from triticale in a combination with other flour (whole grain rye, hull-less barley flour, rice and maize flour) in various proportions. Wheat flour (Type 405) was used as a control. Rheological properties of mixed flour dough were studied using Farinograph (Brabender Farinograph-AT, GmbH and Co. KG, Germany). Moisture content of flour and flour blends was determined using AACC method 44-15A. Water absorption and dough development time decrease, but dough stability, time of breakdown and farinograph quality number increases, increasing proportion of other flour in triticale flour. The flour blends need less time for dough development comparing with triticale flour. Enriching triticale flour with whole grain rye, whole grain barley, rice and maize flour in various proportions made triticale flour dough more rheologically stable during mixing.