Field trials were carried out at Jõgeva Plant Breeding Institute in 2008 – 2011 to identify the possibilities of using early red clover (Trifolium pratense L.) ‘Jõgeva 433’ (diploid), Washington lupine (Lupinus polyphyllus Lind.) ‘Lupi’ and crimson clover (Trifolium incarnatum L.) as green manure. Fresh material of the above species was ploughed into the soil in autumn of the sowing year. Fertilizer value was quantified through yield and grain quality of spring wheat ‘Vinjett’ and barley ‘Inari’. The composition and amount of ploughed biomass were recorded. By the time of ploughing, Washington lupine had produced the most abundant biomass. >From studied species crimson clover had the lowest fertilizer value – only by 6–7% extra yield of spring wheat in the following year. Crimson clover had no residual effect of fertilization in the second year. The fertilizer values of red clover and Washington lupine were approximately equal. Their effect on yield increase of spring wheat and barley lasted for three years, on grain quality for two years. Red clover, ploughed into the soil in the year of sowing, resulted in maximum spring wheat yield increase of 23.9%, compared with N 0 treatments; that of Washington lupine was 21.3%. The residual positive effect in the second year quantified as barley production increased by 6.2% in Washington lupine and 7.9% in red clover. The yield increase in the third year was 3.9% and 12.1%, respectively. Green manure increased the contents of crude protein and gluten in spring wheat and crude protein content in barley.

Live weight and body condition are indicators for dairy cow’s (Bos taurus) health, milk productivity and reproduction. Live weight and body condition are defined by genetic and non-genetic factors. These factors are dependent on dairy cows growing and welfare. The aim of research was to analyze body condition relationship with milk productivity and live weight. Data were collected from 49 different breed and lactation dairy cows. Research location was Latvia University of Agriculture Research and Study farm ‘Vecauce’. Data were collected from October 2013 to January 2014. Body condition score of all cows decreased from 2.8 ± 0.05 to 2.5 ± 0.04 points in research period. Milk yield increased from 35.6 ± 0.79 kg in the 1st recording to 40.9 ± 1.12 kg in the 2nd recording. Milk yield decreased in the 3rd recording (p is less than 0.05). Fat content was the lowest in the 2nd recording (35.5 ± 0.09 g kgE-1). Protein content was significantly different in the 1st and 2nd recordings (p is less than 0.05). Somatic cell changes were not significant. Body condition decreased of older lactation cows, but milk yield increased at the same time. Milk yield was significantly the greatest in red breed group, compared with Holstein black and white cows (51.1 ± 3.21 kg vs. 41.4 ± 0.78 kg; p is less than 0.05). Body condition score significantly affected live weight in such body condition score groups: less than 2.5 points, 2.75 to 3.0 points. Effect was not significant on live weight in body condition score 3.25 less than group. Milk productivity and quality traits were not affected by the body condition score (p is less than 0.05).

Estimating feed intakes of individual cows in a loose-housed system is difficult and unreliable. It is known that estimating intakes from the number of bites taken at grazing is unreliable. Feeding from a total mixed ration (TMR) is likely to have fewer confounding variables. All cows were over 30 months old, of three breeds: Holstein Friesian, Estonian Red and Estonian Native. There were 30 feeding bins and 66 cows. Cows were observed over the whole 24 hour period, from 1st July to October 22nd 2011, in Märja experimental farm, of the Estonian University of Life Sciences, and data from 37 cows were collected. Measures taken included: time spent at the feed bin, number of bites taken at each visit, weight lost from the bin, and evidence of stealing. Mean time spent at each visit to the feed bin with standard error was 4.4 + 0.68 minutes. The mean number of bites per visit was 7.1 + 1.01. There was a significant correlation between the number of bites and total time cows spent feeding (p is less than 0.001), with a regression R2 value of 79.8%. No correlation was found between the number of bites and feed removed at each visit (p=0.851) nor between the time per visit and amount of feed removed (p=0.681). Therefore, there is no evidence that either the number of bites taken per visit or the time spent at bin per visit is related to intakes. There was no effect of age. Stealing was evident and widespread.

Nowadays the demand for fast and easy-to-make meals is ever increasing. This type of food is an essential dietary component of a large section of people in developed countries. Given the economic importance of ready-to-eat meals there is a need for a better understanding of the factors that determine their consumption. The aim of this research was to determine consumer attitudes towards the introduction of ready-to-eat meal (MRE) sets in the Latvian market. A survey was performed to determine the Latvian citizens’ attitudes towards the introduction of this type of quick-tomake, ready-to-eat products into the market of Latvia. The survey included a total of 800 respondents who answered 14 questions which were related to the interest in MRE sets that can be prepared (warmed up etc.) in less than 10 minutes and taste like home-cooked food, and the types of MRE sets these consumers would like to purchase. The demand forecast for MRE sets in the Latvian market is rather high as 67% of the respondents expressed a desire to purchase these products; the development and implementation of MRE sets is topical. The results show that the highest rated MRE set the respondents, a total of 77.1%, expressed a desire to purchase, was chicken fillet with vegetables. No significant differences in terms of liking were observed between chicken fillet with vegetables and chicken fillet with rice, the second highest rated MRE set by 73.9% of the respondents (p is greater than 0.05).

The purpose of the current research was to investigate the total protein content and amino acid composition of flour blend made from several types of whole grain flour for pasta production. Conventional rye, hull-less barley, triticale and wheat grain was used in the experiments. For the flour blend obtaining white wheat flour type 550 was used. Using standard methods the following quality parameters were analysed: protein content in grain and flour samples by using InfratecTM model 1241 Grain Analyzer, in flour blend – by AACC 46–20, amino acid content by LVS ISO 13903:2005. In the present research it was determined that it is possible to increase the total protein content in wheat flour type 550 by 11% if adding whole wheat or whole triticale flour, and by 7% if adding whole grain flour of hull-less barley. Higher total amino acid content was obtained for whole wheat flour sample; lower – for whole rye flour sample. Significantly lower total amino acid content was obtained in whole rye, hull-less barley and triticale flour comparing with whole grain wheat flour. No significant differences (p=0.779) were found in the analysed essential amino acid content made of different flour blend – the content of essential amino acids in the analysed flour blend samples was very similar.

Antibiotic resistance of Staphylococcus is increasing worldwide. New antibiotics are used in big amounts in the meat production more and more. As a zoonosis, Staphylococcus aureus (S. aureus) is found in various species of animals and people, especially in those, who are working on commercial swine farms and slaughterhouses. The aim of the study was to find out the occurrence of S. aureus in different age groups of pigs on commercial swine farms in Latvia. Microbiological samples (n=702) including nasal, rectal, milk and air samples were collected during October 2013 from three closed farms of different sizes and several age groups of pigs and investigated with microbiological standard methods. S. aureus was found in all swine farms. The occurrence of S. aureus in Latvian pig farms was 41% and the highest occurrence of S. aureus was among 3-3.5 month old piglets. S. aureus was 1.8 times more frequently found in nasal than in rectal samples, and only in 28.38% of pigs S. aureus was in both - nasal and rectal samples. S. aureus was found also in sow milk in 13% of samples and in 3 samples of air (n=23).

In goats (Capra) the growth and functional development of certain parts of the multi-chambered stomach continue during the first few months after birth. The aim of this research was to clarify morphofunctional changes in the kids abomasa and rumina and live weight gain during the first 8 weeks of life. Research was performed in two parts. In the first part (P1) we used Saanen breed kids which were all kept in the same conditions and in the second part (P2) we used Saanen breed kids which were separated in two groups with different feeding diets. In P1 the stomach contents of the goat kids were collected after slaughter (on day 1, 17, 25 and 30), weighed full and empty. The gastrohromoscopical method proved that in the newborn kids the area where the abomasal pH is 3.0 and lower is about 10% of the surface of the abomasum, but in age of three weeks it is composing 80% of the mucosal surface of the abomasum. In P2 were two groups – in the first group (MMG) kids which were fed with dairy (mother) milk and lived with mothers, the second group (MRG) kids were fed with milk replacer and lived separate from mothers. The stomach contents were collected after slaughter(at day 45 and 60).We confirm that the most important age of stomach development and kids growth in postnatal period are the first 45 days. During this period the most significant differences can be observed. On day 60 there are no significant differences (p is greater than 0.05) between MMG and MRG stomach development.

A prospective study was performed on 15 client-owned dogs to assess the clinical outcome after surgical excision of canine cutaneous mast cell tumors (MCTs) depending on histologic grade and completeness of surgical margins. The surgical margins were evaluated as complete, close or incomplete if they were more than 3 mm, from 1 to 3 mm or less than 1 mm wide, respectively. Survival time for dogs with low grade MCT (based on grading by M. Kiupel et al.) was 409 days compared with only 60 days for dogs with high grade tumor. Dogs with high grade tumors had significantly shorter survival time and worse prognosis than dogs with low grade tumors (p=0.013). Complete excision was associated with lower possibility and longer time to tumor recurrence, as well as longer survival, however, marginal surgical border status did not have a significant impact on time to tumor recurrence and survival. It was also found that tumor duration but not tumor size had a significant impact on surgical margin status (p=0.047). Tumor size significantly affected survival time with larger tumors being correlated with shorter survival (p=0.03). The results of our study suggest that grade, tumor size and recurrence are significant factors for MCT prognostication.

This experimental study assesses the influence of ignition timing on emissions from a production four cylinder port injection spark ignition engine. The aim of this research was to evaluate the necessity of ignition timing correction when the regular gasoline vehicle is being adapted for the use of E85 fuel. Tests were conducted in the Alternative Fuels Research Laboratory of Latvia University of Agriculture in December 2013. The engine was fuelled with the ethanol-gasoline blend E85 or the commercial gasoline A95. The engine was tested within a vehicle in a chassis dynamometer in steady state conditions, which resemble driving at 50 km hE-1 and 90 km hE-1. The original engine control unit was replaced with a programmable one. Engine-out and tailpipe exhaust gas samples were taken and analysed with a FTIR-type analyser AVL SESAM. Carbon monoxide (CO), unburned hydrocarbons (HC), nitrogen oxides (NOx), acetaldehyde and unburned ethanol emission volumetric share is presented. CO, HC and acetaldehyde emissions were not affected by variation of the ignition timing within the tested range. NOx and ethanol emissions were reduced with the ignition timing retard. The emissions of CO, HC and NOx were reduced, when the engine was fuelled with the E85 fuel, comparing with the gasoline use. Ignition timing, optimized for the gasoline, was found suitable for the E85 fuel from the emission analyses point.

The paper discusses heat transfer and the step response of a low-power induction motor to no-load mode under fan cooled and naturally cooled conditions. In Latvia University of Agriculture (LUA) in the electric drive laboratory the experimental tests were performed on a 1.1 kW totally enclosed fan cooled three phase induction motor with a fan mounted on a shaft for fan cooled conditions and with a fan taken off for naturally cooled conditions. The transient temperatures are measured in nine points of the stator end windings and in two points of the stator frame using thermocouples. Temperature is measured by using K type thermocouples and Pico-Log TC – 08 data logger. The current and voltage are measured by using Simple Logger II L562 two channel data logger. Measurement data are processed and archived using data loggers Pico-Log Recorder, Simple Logger II and Data View software. The experimental test results show that ventilation plays an essential role in the heating process of small power induction motors. Mathematical and virtual models of induction motor windings heating are represented to simulate the heating process of induction motor under no-load mode and different cooling conditions.