The study concentrates on housing vulnerability during the post-crisis period in Latvia and how it has impacted vulnerable groups, particularly seniors. Housing vulnerability includes objective and subjective factors. Seniors 65+, especially those seniors who live alone are one of the vulnerable groups in sense of housing security. It could be characterized by parameters of housing quality and housing expenses adequacy. The EU policy examines perceptions of insecurity in few areas, including housing security and old-age income insecurity – of not having an adequate income in old age. The number of single senior 65+ households is increasing in both rural and urban areas. The study explores housing vulnerability for older persons – seniors 65+, one of social groups in disadvantageous economic situation. Authors explore how housing vulnerability affects seniors, especially those who are over the age of 65+ and are living alone. The challenging issues were construction of theoretical background integrating housing security during social changes in the post-crisis period with disadvantageous situation of seniors 65+. The comparative quantitative approach is based on data from descriptive statistics. The research design is quantitative comparative analysis. To make a comparison, there were selected two groups: single seniors 65+ and all households. The proposition is that in the post-crisis period housing vulnerability for seniors 65+ was decreasing, but differs from average parameters of housing vulnerability for total population. The restriction of current study is analyses that cover only single seniors 65+. The results show significant differences in housing quality and proportional housing maintenance expenditures between single seniors 65+ and all households.

The authors explore ways to combine the use of traditional and mobile positioning data (as Big Data) in assessing the economic impact (EI) of tourism in specific regional areas in line with the opportunities of the digital age. In order to provide an automated evaluation of the tourism EI, a study is being carried out resulting in technical development of a prototype for two interconnected digital applications – ‘Data Bank’ and ‘Data Analysis’ – as a unified solution for research in the e-environment. The study is based on the research work started in 2017 that resulted in the development of a theoretical strategic model for the construction of the prototype. Continuing the research, the aim of this publication is to develop a theoretical tactical (technological action) model needed for the practical development of the prototype, incl. for the identification of prerequisites to develop the Software Design Description (SDD) of the prototype. To this end, the technological capabilities and their collaborative effects have been investigated in line with the requirements included in the prototype Software Requirements Specification (SRS). Performing the qualitative research, the tactical model has been developed, which designates the practical construction of the prototype. It consists of a combination and joint operation of 4 platforms (servers) – Apache Ambari, Apache Hadoop Ecosystem, Drupal and Jupyter Notebook. The strengths of the model, the risky features as well as the future perspectives for the practical implementation of the goal have been discovered during the research.

It is neccessary for the Regional Universities (RU) to strengthen their regional role. The reason behind such trend is the increased economic and regional differences between regions which applies also to Latvia. The aim of this research is to define the contribution of the RU to the regional development. The research included analysis of scientific sources, correlation and analysis of variance. It was determined that there is a positive correlation 0.979 between the number of students of RU and corresponding regional Gross domestic product (GDP) per capita; thus the RU have a positive impact on the regional development while other drawbacks and problems exist.

One of the most often mentioned competence in the surveyed literature is problem solving. It is also one of the key skills for the sustainable development of society. The article includes analysis of pedagogical approaches like project-based, problem-based learning and enquiry-based learning, as well as describes the use of design thinking as one of the problem solving approaches in higher education. As mathematics studies at universities play an important role in developing problem solving skills, an empirical study was carried out to identify the pedagogical approaches used by mathematics teachers and to illustrate the development of problem solving skills in mathematics studies at universities in Latvia. It includes a survey of mathematics teachers in Latvia aimed at identifying their experience in implementing different pedagogical approaches to mathematics and assessing the extent to which these methods help develop problem solving skills. The answers of mathematics teachers show that problem solving skills are developed at the middle level, which means only for the use in a certain situation (that is slightly different from previously known). The most effective approach to promoting problem-solving skills is the so-called context approach, which means focusing on the practical task related to a specialty. In the empirical study self-assessment method is used and the results are based only on respondents’ opinion.

The study represents results on remote sensing methods based evaluation of land use and land use changes in former and existing peat extraction areas in Latvia. The aim of the study is to elaborate activity data set for the National GHG inventory for the wetlands remaining wetlands for peat extraction. The study results provide sufficient data for application of the default emission factors for the peat extraction sites and flooded lands. Abandoned peat extraction fields, which are not yet afforested, flooded or rewetted, should be reported as peat extraction sites following a conservative approach in application of the emission factors. The study results can be used to report land use changes since 1990; however, linearized approach in calculation of the land use change may result in overestimation or underestimation of GHG emissions in certain periods of time. According to study results, the area of peat extraction sites is considerably bigger than currently reported in the National GHG inventory, mainly due to considerable areas of abandoned peat extraction fields. Flooded lands may be a significant source of emissions and should be introduced in the National GHG inventory to secure consistency of reporting. Methodology for calculation of GHG emissions from flooded lands should be also elaborated. It is also necessary to elaborate emission factors for fertile and no fertile peat extraction sites and continue work on separation of different soils in the inventory to increase accuracy of calculations.

Increase in use of biomass as renewable source of energy in Europe is tightly linked to the policies aimed at mitigation of climate changes i.e. reductions of greenhouse gas emissions. Both for assessment of the carbon sequestration and emissions as well as for assessment of potential amounts of biomass for renewable energy, information of land cover dynamics are essential. Therefore, the aim of our study was to improve accuracy of estimates of the land use changes in the time period between 1990 and 2014. Land use categories were determined in accordance to UNFCCC: wetland, cropland (arable land, bare field), forest, grassland, settlements (urban/suburban area), and other land. Combination of data from National forest inventory (NFI) sample plots and analysis of Landsat images were used. For the classification based on Landsat images vegetation index (NDVI) was estimated and linked to known information on the land use type from NFI sample plot data. In the analysed period, the most significant changes were found for forest lands – the total area of forest land during the last two decades had increased by 1% (64.5 thousand ha). Similar increase (1.2%) was observed also in the area of cropland. Both of these tendencies were primarily the result of marginal field area reduction (by 2.6%). Increase in forest area and thus annual increment has led to an increase in above-ground biomass by 10.2 m**3 haE-1.

The early stage of forestry is crucial for successful and sustainable forest management. One third of the reforested forest in Latvia is regenerated by planting with different kinds of tree seedlings. The success of forest regeneration by planting depends on correctly prepared soil and choice of the right seedling material. The aim of this study was to evaluate the impact of different soil preparation methods and used type of seedlings on tree survival and growth rate after the first growing season. For this study six young stand sites located in the north-west and central part of Latvia were established in three forest types and in each site soil was prepared in furrows by disc trenching, in mound and left untreated. Reforestation was conducted in the spring of 2017 with four tree species Picea abies, Pinus sylvestris, Alnus glutinosa and Betula pendula and three seedling types were used, bare roots, containerized and improved root system. The evaluation of survival and measure of annual increment was conducted at the end of the first growing season in the autumn of 2017. Results showed that overall the highest seedling survival rate provided soil prepared in mound (90%), and seedlings with improved root system, though the lowest survival rate was observed for bare root seedlings. Containerized seedlings have a higher proportional increment if compared to bare root and improved root system seedlings, but differences are not significant yet (p is greater than 0.05). In conclusion, the survival rate of outplanted seedlings differs by chosen stocktype and soil preparation method used in forest regeneration and for various tree species impact of chosen stock type on survival rate differs.

Browsing damages are becoming more common due to almost doubling of population densities of cervids in Latvia during last 20 years; however, the figures are still lower than those observed in western and northern European countries. Consequently, the frequency of damages in young stands is increasing, too. Protection against browsing becomes more difficult, as the trees grow older; also the bark-stripping may result in a long-term deterioration of stem quality. Therefore, the aim of the study was to assess the factors affecting bark striping damages in pole-stage Norway spruce stands. Data were collected in 4 sample plots in damaged Norway spruce stands in western Latvia, measuring the tree parameters: height, diameter, branch characteristics and damage parameters: size, proportion from the stem circumference. Results of the modelling reveal that both damage parameters were significantly influenced by the branch length and thickness in the whorl closest to the breast height and the size of damages – also by breast height diameter of the tree. It suggests that increasing productivity of trees would not reduce the browsing problem. Since the silvicultural goal is the reduction of the size of branches, especially in bottom-log of the stem, protection against bark-stripping needs to be developed and cervid population densities controlled to reduce the problem.

No simple method has yet been found for satisfactory wood bio-resistance improvement regarding material performance in its end-use. An attempt to obtain material with proper strength and bio-durability by combined wood thermal modification and impregnation with a biocide is being researched. To select the most appropriate treatment conditions for the combined process, changes in wood physical and mechanical properties depending on the treatment temperature were investigated in the present study. For the investigation, in Latvia the most widespread wood – softwood pine (Pinus sylvestris L.) and hardwood birch (Betula spp.) was used. Changes of wood mechanical and physical properties due to thermal modification were investigated and effect of treatment temperature and relative humidity on wood characteristics evaluated. It was found that, due to different degree of changes, no identical treatment conditions suit for birch and pine wood. Birch wood is considerably more sensitive to temperature and acceptable strength was maintained only for birch wood treated at 150 °C and for pine wood treated at 160 °C. Nevertheless at higher environmental humidity equilibrium moisture content and consequently radial and tangential swelling increased for all studied wood types, substantially smaller changes due to elevated humidity were detected for modified wood.

Birch plywood has proved itself to be one of the most rational ways of wood processing. Growing demand of high performance birch plywood products requires a complex numerical analysis based on Finite Element Method (FEM), instead of using simple analytical assumptions, which prevent optimization of plywood construction (lay-up). In the research samples of birch plywood of several thicknesses, both sanded and non-sanded, with fibre direction of external veneer both in the longitudinal and transverse directions were tested. An extensometer and optical strain gauge were used for strain measurement. The FEM analysis, using commercial software SolidWorks Simulation Premium (SW), versus experimental bending and tension testing according to LVS EN 789 was carried out in this paper. The analysis of results indicates that there is a high correlation between the results of the experiments and the FEM. Particularly for in tension loaded specimens one can be tested up to the maximum ply strength (100 MPa); meanwhile, in bending up to 71MPa – the average stress in load bearing ply at the proportionality limit. Due to software restrictions, shear stresses cannot be evaluated. Future studies are considered to investigate terms for designing plywood with dynamic properties of strength and stiffness to be taken into account.