This research was conducted in 2020 to determine the effects of leonardite-derived humic acids (Humas-15, Liquid Humus and Humico Maximix-K) with different properties, along with reduced nitrogen fertilization, on tuber yield and quality in potatoes (cv. Van Gogh). In the study, chemical fertilizer applications were made as basic fertilization (20 N 10 P 10 K), reduced fertilization I (15 N 10 P 10 K) and reduced fertilization II (10 N 10 P 10 K). Humic acids were applied twice with irrigation water, at the beginning of the flowering period and 15 days later. Humas-15 and Liquid Humus were applied at 1.0 and 2.0 lt/da doses, and Humico Maximix-K was applied at 400 and 800 g/da doses. A total of seven traits (tuber number per plant, tuber yield per plant, marketable tuber yield, total tuber yield, dry matter content, reducing sugar content and total sugar content) were measured. Reducing nitrogen applications with humic acid applications significantly affected all the traits studied. Humic acid applications combined with reduced nitrogen fertilization increased the number of tubers per plant by up to 13%, marketable tuber yield by up to 18% and total tuber yield by up to 16% compared with the control. Total and reducing sugar contents varied between 1.27-1.58% and 159-389 mg/100g fw, respectively depending on the applications. In the study, the highest tuber yield was obtained from 1.0 and 2.0 L/da Humas-15 and 2.0 L/da Liquid Humus applications applied together with reducing nitrogen applications which have close values to the recommended fertilization applications.

This research was conducted in 2020 to determine the effects of leonardite-derived humic acids (Humas-15, Liquid Humus and Humico Maximix-K) with different properties, along with reduced nitrogen fertilization, on tuber yield and quality in potatoes (cv. Van Gogh). In the study, chemical fertilizer applications were made as basic fertilization (20 N 10 P 10 K), reduced fertilization I (15 N 10 P 10 K) and reduced fertilization II (10 N 10 P 10 K). Humic acids were applied twice with irrigation water, at the beginning of the flowering period and 15 days later. Humas-15 and Liquid Humus were applied at 1.0 and 2.0 lt/da doses, and Humico Maximix-K was applied at 400 and 800 g/da doses. A total of seven traits (tuber number per plant, tuber yield per plant, marketable tuber yield, total tuber yield, dry matter content, reducing sugar content and total sugar content) were measured. Reducing nitrogen applications with humic acid applications significantly affected all the traits studied. Humic acid applications combined with reduced nitrogen fertilization increased the number of tubers per plant by up to 13%, marketable tuber yield by up to 18% and total tuber yield by up to 16% compared with the control. Total and reducing sugar contents varied between 1.27-1.58% and 159-389 mg/100g fw, respectively depending on the applications. In the study, the highest tuber yield was obtained from 1.0 and 2.0 L/da Humas-15 and 2.0 L/da Liquid Humus applications applied together with reducing nitrogen applications which have close values to the recommended fertilization applications.

In recent years, there has been a growing interest in herbal remedies for therapeutic purposes. Aromatic plants have become a significant source of raw materials for the fragrance, food, and cosmetics industries. Additionally, the emergence of new applications and the trend towards natural nutrition and alternative healing methods, often referred to as "going natural," have increased the interest in medicinal and aromatic plants in our country, as well as in other countries around the world. In this study were investigated to determine yield and quality characteristics of seven different lavender (Lavandula intermedia Emeric ex Loisel. = L. hybrida L.) (Grasso, Süper-A, Seguret, Dutch, Abrial, Akmeşe, English) cultivars under dry and irrigated cultivation in Kahramanmaraş conditions between 2019 and 2020. The research was carried out in a randomized block design with 4 replications. Fresh stem flower yield was the highest variety Grasso(672.81kg/da). The lowest fresh stem flower yield was found in Seguret variety with 611.33kg/da The highest dry stemless flower yield was determined in Grasso variety with 59,66 kg/da. There were significant differences determined between cultivars the end of 2 years. The highest average fresh stem flower yield (693.067 kg/da) and the highest average dry branched flower yield (252.588 kg/ha) were measured in GRASSO variety.

Based on high dependent of many processing company on palm kernel oil, high quality palm nut cracking machine is not only necessary but also important to revitalize the production of palm kernel in other to meup with ever increasing industrial demand. Different palm kernel beaters; Swing beater (SB) and the conventional type known as rigid beater (RB) of an existing palm kernel cracker were investigated using the moisture content (7, 17, 26% (db)), five different speeds (970, 1200, 1450,1750, 2430rpm) and three different average nut sizes (14.5, 22.15, 29.43mm) of palm kernel nut. Approximately, six thousand palm nuts of Tenera specie were collected, dried, cleaned and sorted to evaluate the machine. Result shows that, the maximum quality efficiency recorded for Swing beater was 89.5% at 17% moisture content (db), 29.4 mm average nut size and 970 rpm machine speed. Similarly, for the performance of rigid beater, the maximum quality efficiency of 71.5% was recorded at 26% moisture content (db), 29.4 mm average nut size and 970 rpm machine speed. The effect of nut size was however not significant on the quality efficiency however it was generally observed that quality efficiency increased with increase in the nuts size. The machine speed has a significant effect on the quality efficiency. Generally, the quality of the kernel recovered decreased as the machine speed decreased. Beater configuration has significant effect on the quality efficiency of the palm nut cracking machine at 5% significant level. Swing beater can be used instead of conventional beater (rigid beater) to crack palm nut for higher quality of whole kernel recovery.

In recent years, there has been a growing interest in herbal remedies for therapeutic purposes. Aromatic plants have become a significant source of raw materials for the fragrance, food, and cosmetics industries. Additionally, the emergence of new applications and the trend towards natural nutrition and alternative healing methods, often referred to as "going natural," have increased the interest in medicinal and aromatic plants in our country, as well as in other countries around the world. In this study were investigated to determine yield and quality characteristics of seven different lavender (Lavandula intermedia Emeric ex Loisel. = L. hybrida L.) (Grasso, Süper-A, Seguret, Dutch, Abrial, Akmeşe, English) cultivars under dry and irrigated cultivation in Kahramanmaraş conditions between 2019 and 2020. The research was carried out in a randomized block design with 4 replications. Fresh stem flower yield was the highest variety Grasso(672.81kg/da). The lowest fresh stem flower yield was found in Seguret variety with 611.33kg/da The highest dry stemless flower yield was determined in Grasso variety with 59,66 kg/da. There were significant differences determined between cultivars the end of 2 years. The highest average fresh stem flower yield (693.067 kg/da) and the highest average dry branched flower yield (252.588 kg/ha) were measured in GRASSO variety.

Based on high dependent of many processing company on palm kernel oil, high quality palm nut cracking machine is not only necessary but also important to revitalize the production of palm kernel in other to meup with ever increasing industrial demand. Different palm kernel beaters; Swing beater (SB) and the conventional type known as rigid beater (RB) of an existing palm kernel cracker were investigated using the moisture content (7, 17, 26% (db)), five different speeds (970, 1200, 1450,1750, 2430rpm) and three different average nut sizes (14.5, 22.15, 29.43mm) of palm kernel nut. Approximately, six thousand palm nuts of Tenera specie were collected, dried, cleaned and sorted to evaluate the machine. Result shows that, the maximum quality efficiency recorded for Swing beater was 89.5% at 17% moisture content (db), 29.4 mm average nut size and 970 rpm machine speed. Similarly, for the performance of rigid beater, the maximum quality efficiency of 71.5% was recorded at 26% moisture content (db), 29.4 mm average nut size and 970 rpm machine speed. The effect of nut size was however not significant on the quality efficiency however it was generally observed that quality efficiency increased with increase in the nuts size. The machine speed has a significant effect on the quality efficiency. Generally, the quality of the kernel recovered decreased as the machine speed decreased. Beater configuration has significant effect on the quality efficiency of the palm nut cracking machine at 5% significant level. Swing beater can be used instead of conventional beater (rigid beater) to crack palm nut for higher quality of whole kernel recovery.

Field experiments were conducted in 2018 and 2019 at the National Potato Research Programme (NPRP), Lalitpur (1360 masl), Nepal, to determine the effect of crop geometry on the growth, yield, and quality of sweet potato genotypes. The experiment was laid out on sandy loam soil in a factorial randomized complete block design (RCBD) with three replications and comprised of a total of twelve treatment combinations of four crop geometry (60cm×25 cm, 60cm×30 cm, 70cm×25 cm, and 70cm×30 cm) and three genotypes (CIP 440015, CIP 440267 and Local White). Among the different crop geometries and genotypes evaluated, 70cm×30 cm plant spacing and Local White genotype were found statistically superior to enhance marketable tuberous root weight per plant (0.572 and 0.541 kg), tuberous root diameter (62.59 and 61.0 mm), shoot fresh weight (509 and 524 g), and tuberous root yield per plant (616 and 620 g). The genotype, Local White yielded higher among the genotypes. The reducing sugar content was influenced significantly by crop geometry and genotypes. The pooled mean showed the highest (15.48 and 17.26 %) reducing sugar in closer geometry 60 cm × 25 cm and Local White genotype respectively and the lowest (11.54 %) in the genotype CIP 440015. CIP genotypes, on the other hand, were high in ß carotene content, whereas the Local genotype had a negligible amount (0.35 mg/100g). On hectare level, our result showed that highest plant density of 66,666 plants ha-1 (60 cm × 25 cm) could give the highest yield per unit area due to greater crop biomass. Our findings suggest that crop geometry can have a considerable impact on sweet potato production. As a result, the geometry of sweet potatoes can be wide or narrow depending on our needs and the area available in our study area or a similar situation.

This study was carried out to determine the effects of ultraviolet-B (UV-B) and LED light on improving postharvest quality of 0900 Ziraat cherry fruits. In the present study, UV-B treated to cherry fruits 10, 20, and 40 min, and then stored dark conditions. On the other hand, the blue (M), red (KR) and ultraviolet-A (UVA) LED light had applied to fruit during storage, continuously. Fruits without application were used as a control. Cherry fruits were stored at 4±1°C temperature with 85-90% RH for 35 days. As a result of the study, the best treatment in terms of increasing the TSS/TA rate (19.3), fructose (5.27%), glucose (6.22%), total soluble phenol (170.16 mg/100 mL CAE) and anthocyanin content (12.11 mg/kg FW), red color, and taste quality (4.63) of fruits was UVB20. It has also been seen that the KR treatment could be used to reducing the titratable acidity content, and increase the amount of fructose, total soluble phenol. The UV-A LED treatment is particularly significant in reducing weight loss, and providing in the fruit stalk remains green. Also, the treatments of both UVB and LED improved the color quality of cherries by increasing brightness, darkening red color, and protection of anthocyanins, whereas increased the EL. As a result, it might be concluded that the UVB20 (5.95 kJ / m2s) treatment was the best and usable treatment to maintaining both biochemical and taste quality cherry fruits during cold storage.

This experiment was carried out under the study entitled “Ripening regulation of the banana Cv. Malbhog using different ripening inducers” for controlling the ripening of the banana, for improvement of quality attributes and post-harvest life of banana. The experiment was conducted at laboratory of horticulture, Agriculture and Forestry University, Rampur, Chitwan, Nepal from 14th March to 16th April 2019. These experiments were laid out in completely randomized design in which the first experiment comprised of seven treatments consisting of distilled water spray, ethephon @ 250 ppm, ethephon @ 500 ppm, ethephon @750 ppm, ethephon@1000 ppm, Dhurseli (Colebrookea oppositifolia) leaves and Ripe banana replicated thrice. Different post-harvest parameters were recorded at the interval of two days for the experiment till any one of the treatment attained score 6 in the color chart. In this experiment, the CI-6 stage was reached earlier on the 9th day with the use of ethephon @ 1000 ppm but ethephon @ 500 ppm was found more effective regarding quality parameters with TSS (21˚B), and TSS/TA (34.66). The maximum physiological loss in weight (12.927%) and pulp peel ratio (3.65) was observed with ethephon@1000ppm and the minimum was achieved in banana sprayed with distilled water. The shelf life of banana was seen minimum (13.33 days) in ethephon @ 1000 ppm and maximum (20.33 days) in banana sprayed with distilled water.

The aim of this study is to determine adaptation and quality parameters of some cool season turfgrass cultivars and species, In the scope of this study, leaf form, variation of leaf colour according to the seasons, tiller number, thinning ratio, weed ratio and general appearance of the species were determined. The experiment was established according to confounding design with four replications in Samsun Conditions at November, 2010. According to 1000 seed weight and characteristics of the plants seeding ratios were determined as pure and viable seed as follows; Lolium perenne 40 g m-2, Festuca rubra var. rubra and Festuca rubra var. commutata 30 g m-2, Festuca arundinacea 40 g m-2, Poa pratensis 20 g m-2, Festuca rubra trichophylla 30 g m-2, Agrostis stolonifera and Agrostis tenuis 5 g m-2, Festuca ovina 25 g m-2. According to the results obtained from this study it was determined that species/cultivars have some superiority to each other because of their different morphological and physiological characteristics. When we consider weed competition, Lolium perenne and Festuca arundinaceae cultivars have to be added to the mixture in order to decrease weed competition. There was colour variation distinctively depending on the seasons for all species. But, compare to the others, cultivars of Agrostis sp. and Poa pratensis cultivars have the potential to keep leaf colour in different seasons. Leaf form and appearance of Festuca rubra, Poa trivialis and Festuca ovina are better than the others. In order to keep good conditions of turfgrass areas, especially after cutting in summer period, Poa pratensis and Poa trivialis should added in mixtures to get benefit their higher regenerating power.