In the present world, climate change is a mass talked issue. Because of climate change, humans and animals are under the risk of threatening. The scientist has pointed out that main reasons for climate change are waste. Waste is generated from household chores and industries, factories etc. that are affecting the balance of the environment in many ways. This waste may be of various types such as solid, liquid, gaseous etc. Therefore, the study was taken to assess the chemical components contain in wastewater in Dinajpur Sadar, Bangladesh. This study was aimed to evaluate the chemical compositions of the generated wastewater including comparison with the groundwater. The data concerning to the rice mill waste water in Dinajpur, Bangladesh was obtained from individual field visits by interviewing with owner and worker in the rice mills. The wastewater samples were collected randomly from different rice mills. A laboratory experiment was performed to determine the chemical constituents of the wastewater sample. The wastewater contained of pH(6.11-6.18), EC(181.47-185.23 µScm-1), Na(26.19-28.89 mgl-1), Ca(45.41-51.26 mgl-1), Mg(47.12-49.8 mgl-10), K(184.7-191.3 mgl-1), TDS(45.94-47.96 mgl-1), HT(306.7-332.33 mgl-1), S(11.05-13.25 mgl-1), Cl-(522.45-526.182 mgl-1), HCO3-(5.12-6.99 mgl-1), DO(0.46-0.53 mgl-1), P(17.01-21.54 mgl-1). The obtained concentration of Ca, EC, pH, Na and HCO3- were within the reported range of groundwater in Dinajpur, Bangladesh. The concentration of Cl-, K, P, Mg and hardness in the wastewater were above the concentration of reported groundwater in Dinajpur, Bangladesh. On the other hand, the concentration of TDS in the wastewater was less than the reported concentration of groundwater in Dinajpur, Bangladesh.

In this study, a total of 202 surface (0-20 cm) soils were collected from the lands of the producers who made contractual production with private companies in the villages where tobacco cultivation is intensively carried out in the Erbaa district of Tokat province. Basic soil properties, macro phosphorus (P), potassium (K), calcium (Ca), magnesium (Mg) and sodium (Na) and micro nutrient (Fe), zinc (Zn) copper (Cu) and manganese (Mn) concentrations of soil samples were determined. Spatial distributions of clay content, pH, EC, calcium carbonate, macro and micro nutrient concentrations of tobacco growing lands were modeled using geostatistical methods and spatial distributions were mapped. The coordinates of the sampling locations were recorded using a precise GPS. Soils were mostly neutral and slightly alkaline. Neutral soil pH is desired for sustainable tobacco production. Plants may not be able to uptake some of nutrients in soils with moderate alkalinity. In this case, the use of acid character fertilizers is recommended. All of the macro nutrients are at sufficient levels in the tobacco growing lands. Copper and iron concentrations were at sufficient levels in all fields. Plant available manganese was sufficient in almost half of the sampled lands, while it was insufficient in the other half. Available zinc concentration was well below the sufficient level in most of the lands. In order to increase the production to the desired level, fertilizers should be applied based on the plant requirement and soil analysis results. The registration of the soil sampling locations provides an opportunity to create a very useful database for researchers, producers and suppliers who want to understand how the quality of the tobacco growing lands has changed over time.

In this epoch, the tremendous increase in the world population accounts for the continuous supply of foodstuff. According to the FAO report, the global population is probable to cross the 9 billion in 2050. With constant population pressure, we are going to face the challenges of food shortage globally about agriculture. The animal production field provides a major share in the supply of foodstuff to compensate for the stress of food scarcity. By adopting the advanced technologies in the animal production field, its productivity can enhance significantly. Innovation in technology has made work easier with the development of different software and the internet. Technologic development made farmers work more contentedly hence, ultimately amplifying the animal production, proficiency, profitability as well as providing a prompt way for livestock sustainability. The animal production consists mainly of 8 factors including 3 major (animal breeding and genetics, animal nutrition, and reproductive performances) and 5 minor (health observation, farm management, water, manure, machinery, environment control, milking automation and electronic identification). The use of advanced technologies in these sectors is found to be fluent by intensifying the ratio of sustainable livestock farming and the welfare of mankind in terms of food security. In this review, innovative tactics and techniques for animal production are potted with positive research results and their drawbacks as well. The use of innovative technologies in their respective fields is close to taking control of whole world manufacturing under its hand to accomplish the world prerequisite regarding food scarcity.

The maximum length, weight, and age information of organisms in an ecosystem, moreover, the first records of migrated exotic species are essential in terms of the basis for the studies on population dynamics, stock assessment, and biological activities. Therefore, the recording of such data may be necessary for scientific databases and new related studies. The Blackspot seabream (Red seabream - Pagellus bogaraveo), which belongs to the Sparidae family, is an important seafood which is marketed fresh and frozen around the Mediterranean and the Aegean seas. Nowadays, this species has high prices depending on market demands in domestic markets as a result of overfishing and is also cultured in northern Spain. It is classified as “Near Threatened Species” in the red list due to its decreasing population trend by the IUCN. A single specimen of the Blackspot seabream with 30.7 cm in total length and 390.00 g in total weight, which was angled in the Saros Bay with a handline by a fisherman on February 08, 2019, was obtained from a fishmonger in Çanakkale. Even though there are bigger individuals in the North-east Atlantic probably depending on polar and/or deep-sea gigantism, the mentioned measurement is the proven maximum total length of this species for the Aegean Sea up to the time.

Biochar as agricultural soil amendment to improve soil physico-chemical properties, crop productivity and sustainable soil fertility management is a well-known practice. A field experiment was conducted to evaluate the effect of biochar on growth and yield components of carrot and selected soil physic-chemical properties. The study was carried by employing a randomized complete block design with factorial arrangement of four level of biochar (0, 4, 8 and 12 tons ha-1) and four level of Nitrogen/Phosphorus (N/P) fertilizer rate (0/0, 60/10, 90/15 and 120/20 kg ha-1) with four replications. Biochar significantly influenced physico-chemical properties of soils, such as bulk density, total porosity, pH, EC, SOC, TN, Av. P and CEC respectively, as compared to control. The results revealed substantial responses to biochar and N/P fertilization on growth and yield components of carrot with increasing level of biochar and N/P fertilizer rate. None of the others yield parameters were significantly affected by the interaction of two factors. From the present study, it can be concluded that dung cake biochar should be applied to enhance and improve soil physical and chemical properties for favourable plant growth.

Main goals of the present study were (1) to initially investigate the nutrient contents and bioactive compounds in the bulb and cloves of garlic, and (2) to study the growth parameter after planting. Garlic bulbs were firstly separated into three categories as pickled, big and small, while the big garlic cloves were also classified into three categories as big, small and central. Secondly, the garlic samples were analyzed before planting for their element profile, proline, soluble protein, free amino acid, β-carotene, lycopene, total phenolic, soluble sugars, SOD and α-amylase activities. Finally, the growth parameters were measured using the cultivated cloves and the pickled bulbs. According to the result, the highest soluble protein, N, phenolic, lycopene and α amylase activity (97.06 mg, 2.58%, 971 mg, 0.368 mg and 38.13 EU, respectively) were recorded in the biggest cloves. The highest proline, amino acid, glucose content (93.84 µmol, 23.54 mg, 230.89 mg, respectively) and K, P, S, Mg, Mn, Fe and Zn (21940 ppm, 7577 ppm, 12200 ppm, 504 ppm, 38.1ppm, 377,7ppm and 44.5 ppm, respectively) were found in the pickled bulb. The maximum level of β-carotene (0.282 mg), Ca, Cl and Sr (11260ppm, 818.7ppm and 47.9 ppm) were determined in the small bulbs. Based on the growth parameters of seedlings, the highest value of shoot and root length (39.12 cm and 24.11 cm respectively), the fresh weight of shoot and root (5.29 g and 4.54 g respectively) and dry weight of shoot and root (1.70 g and 1.24 g respectively) were noted with the big cloves. The results of the current study have indicated that the pickled cloves have higher macro and micro nutrients, proline, amino acid and glucose, while the big cloves of garlic have higher proline, phenolic, N%, lycopene and amylase activity. It can be said that the big cloves showed good value for the five bioactive compounds, but the pickled exhibited good value for the macro and micro element and glucose.

In this study, performance characteristics such as power take off (PTO) power consumption, fuel consumption, fuel consumption for the unit field-unit product were determined at different working speeds with two different PTO applications (540 and 540E) in a single row disc type silage machine. In particular, the 540E PTO application greatly reduces fuel consumption for unit work. The best results in terms of hourly fuel consumption were achieved in 540E PTO application and V1 working speed. When the field - product fuel consumption is evaluated, the best results were obtained with the 540E PTO application at the V3 working speed. When an evaluation is made considering all the parameters, it is concluded that the 540E PTO application will provide certain advantages in terms of fuel consumption compared to the 540 PTO application for the silage machine operating by taking the motion from PTO. 540E PTO application can be used as an important alternative to 540 PTO application for machines of similar capacity and features.

In this study, optimum harvest times, cluster and berry characteristics of four grape cultivars (Hasandede, Öküzgözü, Boğazkere, and HorozKarası) grown in Mecitözü (Çorum) ecological conditions were determined. In two consecutive years (2017-2018) yield, clusters, berry properties, water-soluble solid content, pH, titratable acidity, maturity index properties were determined. Some biochemical changes in grape varieties were followed during the ripening periods in the second year. The highest yield in both years was obtained from the variety of Horoz Karası (1421.2 and 1504.8 kg/da), while the lowest yield was obtained from Öküzgözü (619.4 and 578.31 kg/da). During the harvest period, the total acidity and pH values must be changed according to years and varieties. The total soluble solids (TSS) and pH values increased with maturation, whereas the total acidity was found to decrease till the last observation date. During the harvest period, all varieties reached optimum harvest maturity in both years.

Both industrial and academic fields, 3-dimensional (3D) printing of food materials is one of the most interesting subjects. Taking attention with its errorless product handling, easy adaptation for personalized nutrition and sustainable properties, 3D printing of foods is also having a potential in the field of health and nutritious products. In this review, potential connection between meat products, personalized nutrition and 3D printing were mentioned briefly. After that, basic working principles of 3D printers and applicability for meat products were explained. Assessment of meat process waste, advantages and limitations, concept of printability and studies in this field were explained and discussed in details.