Microemulsions are thermodynamically stable systems that have attracted considerable attention in the food industry as delivery systems for many hydrophobic nutrients. These spontaneous systems are highly dependent on ingredients and composition. In this work phase diagrams were constructed using two surfactants (Kolliphor RH40 and ELP), water, sunflower oil, and ethanol as cosurfactant, evaluating their physicochemical properties. Stability of the systems was studied at 25 and 60 °C, monitoring turbidity at 550 nm for over a month to identify the microemulsion region. Conductivity was measured to classify between water-in-oil and oil-in-water microemulsions. The phase diagram constructed with Kolliphor RH40 exhibited a larger microemulsion area than that formulated with Kolliphor ELP. All formulations showed a monomodal droplet size distribution with low polydispersity index (<0.30) and a mean droplet size below 20 nm. Systems with higher water content presented a Newtonian behavior; increasing the dispersed phase content produced a weak gel-like structure with pseudoplastic behavior under flow conditions that was satisfactorily modeled to obtain structural parameters. | Fil: Mori Cortés, Noelia. Provincia de Buenos Aires. Gobernación. Comisión de Investigaciones Científicas. Centro de Investigación y Desarrollo en Criotecnología de Alimentos. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Centro de Investigación y Desarrollo en Criotecnología de Alimentos. Universidad Nacional de la Plata. Facultad de Ciencias Exactas. Centro de Investigación y Desarrollo en Criotecnología de Alimentos; Argentina | Fil: Lorenzo, Gabriel. Provincia de Buenos Aires. Gobernación. Comisión de Investigaciones Científicas. Centro de Investigación y Desarrollo en Criotecnología de Alimentos. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Centro de Investigación y Desarrollo en Criotecnología de Alimentos. Universidad Nacional de la Plata. Facultad de Ciencias Exactas. Centro de Investigación y Desarrollo en Criotecnología de Alimentos; Argentina | Fil: Califano, Alicia Noemi. Provincia de Buenos Aires. Gobernación. Comisión de Investigaciones Científicas. Centro de Investigación y Desarrollo en Criotecnología de Alimentos. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Centro de Investigación y Desarrollo en Criotecnología de Alimentos. Universidad Nacional de la Plata. Facultad de Ciencias Exactas. Centro de Investigación y Desarrollo en Criotecnología de Alimentos; Argentina

This research delves into understanding the effects of composition on the rheological response of multi-component food inks for 3D food printing. Accordingly, the motivation is to decouple the nutrient and water content effects on the rheology. We formulated inks by combining pea fractions with water and employing a water-holding-capacity based hydration method. Rheology is characterized by steady shear rate and oscillatory strain amplitude sweeps. Strain sweep curves infer that the deformation response of all inks follows a similar trend, and samples sharing the same macronutrient formulation are mapped to a master curve after scaling with the elastic plateau modulus. Samples sharing the same macronutrient formulation mapped to a master curve after scaling with the elastic modulus. Shear rate testing showed that the inks were shear thinning yield stress materials. Shear rate sweeps also collapsed on a master curve scaled by the yield stress and critical shear rate on the y and x axes. The yield stress and the plateau modulus appeared to be controlled by the water content, while the shear and strain thinning exponents were independent of the formulations, inferring that the rheology is scaled by the water content while preserving the shear thinning response. Observing the independence of the rheological properties from the nutrient composition and scalability of the rheology by the water content provided a step forward in developing formulations with various nutrient content at desired ow properties, which promises personalized nutrition. Furthermore, the study shows the applicability of various rheological techniques, which are expected to contribute to the literature on the rheology of granular pastes.

This research delves into understanding the effects of composition on the rheological response of multi-component food inks for 3D food printing. Accordingly, the motivation is to decouple the nutrient and water content effects on the rheology. We formulated inks by combining pea fractions with water and employing a water-holding-capacity based hydration method. Rheology is characterized by steady shear rate and oscillatory strain amplitude sweeps. Strain sweep curves infer that the deformation response of all inks follows a similar trend, and samples sharing the same macronutrient formulation are mapped to a master curve after scaling with the elastic plateau modulus. Samples sharing the same macronutrient formulation mapped to a master curve after scaling with the elastic modulus. Shear rate testing showed that the inks were shear thinning yield stress materials. Shear rate sweeps also collapsed on a master curve scaled by the yield stress and critical shear rate on the y and x axes. The yield stress and the plateau modulus appeared to be controlled by the water content, while the shear and strain thinning exponents were independent of the formulations, inferring that the rheology is scaled by the water content while preserving the shear thinning response. Observing the independence of the rheological properties from the nutrient composition and scalability of the rheology by the water content provided a step forward in developing formulations with various nutrient content at desired ow properties, which promises personalized nutrition. Furthermore, the study shows the applicability of various rheological techniques, which are expected to contribute to the literature on the rheology of granular pastes.

Gels are viscoelastic systems built up with a liquid phase entrapped in a three-dimensional network, which can behave as carriers for bioactive food ingredients. Many attempts have been made to design gel structures in the water phase (hydrogels, emulsion gels, bigels) or oil phase (organogels, bigels) in order to improve their delivery performances. Hydrogels are originated from proteins or polysaccharides, which are suitable for the delivery of hydrophilic ingredients. Organogels are mainly built up with the self-assembling of gelator molecules in the oil phase, and they offer good carriers for lipophilic ingredients. Emulsion gels and bigels, containing both aqueous and oil domains, can provide accommodations for lipophilic and hydrophilic ingredients simultaneously. Gel structures (e.g. rheology, texture, water holding capacity, swelling ratio) can be modulated by choosing different gelators, modifying gelation techniques, and the involvement of other ingredients (e.g. oils, emulsifiers, minerals, acids), which then alter the diffusion and release of the bioactive ingredients incorporated. Various studies have proved that gel-based delivery systems are able to improve the stability and bioavailability of many bioactive food ingredients. This review provides a state-to-art overview of different gel-based delivery systems, highlighting the significance of structure–functionality relationship, to provide advanced knowledge for the design of novel functional foods.

Vegetable proteins proved to be good emulsifiers for food emulsions with dietetic advantages. The use of these emulsions as car- riers for healthy ingredients, such as colourings, with antioxidant and other beneficial properties, is an interesting subject. In this work, the capacity of the biomass of the microalga Chlorella vulgaris (which has been widely used as a food supplement) as a fat mimetic, and its emulsifier ability, was evaluated. Pea protein emulsions with C. vulgaris addition (both green and orange – carotenogenic) were prepared at different protein and oil contents. The rheological properties of the respective food emulsions were measured in terms of the viscoelastic properties and steady state flow behaviour and texture properties. It was observed that the two microalgal forms evidenced a fat mimetic capacity in these emulsions, the performance of the green stage of this C. vulgaris organism was significantly (p < 0.05) better than the orange stage.

The use of natural colourings in food products presents nutritional advantages, and certain pigments are associated with functional properties, e.g. antioxidant effects. This can be very advantageous in food products with high fat contents like mayonnaises. The aim of this work was to study the effect of adding natural pigments, lutein and phycocyanin, to the water and oil phases, respectively, of oil-in-water pea protein-stabilized emulsions, beyond the desirable and expected development of a green colour. The emulsions were prepared with 3% (w/w) pea protein, 65% (w/w) vegetable oil, and varying concentrations of lutein and phycocyanin (0.25–1.25% w/w). Emulsions containing both pigments, in different proportions (total pigment concentration of 0.5%, w/w) were also prepared. Oscillatory and steady-state measurements, as well as droplet size distribution and textural profile tests, were performed. The addition of lutein to the disperse oil phase promoted a decrease of the emulsions’ rheological and textural parameters, while the addition of phycocyanin to the water (continuous) phase resulted in an increase of these properties. When using combinations of both pigments, an increase of the rheological and textural parameters with phycocyanin proportion was apparent, and a synergetic effect due to the presence of both pigments was found.

The viscosity profiles of six commercially available food thickeners (Guarcol, Keltrol, Novartis, Nutricia, QuikThik, and Supercol) in water and raspberry cordial were studied in a strain-controlled rheometer at 20 °C. The thickened fluids exhibited a shear-thinning behaviour, and their viscosities were not significantly (p > 0.05) affected by holding time up to 24 h. Irrespective of the thickener and dispersing medium, the viscosity increased as the solids content was increased, as did density and yield stress. Rheological models that best fit the flow data of the thickeners in the dispersing media were recommended. At an assumed shear rate of about 50 s-1 for normal swallowing, predicted and experimental viscosities are not significantly (p > 0.05) different. The recommended models can be used to calculate the weights of the thickener and dispersing medium to achieve a known viscosity of the thickened fluids, match videofluoroscopy fluids and obtain objective classification of the thickened fluids.