Beef production must combine the interests of both producers and consumers, taking into account the sustainable use of environmental resources. The aim of the study was to analyze and compare the slaughter results, meet chemical composition and pH value of three beef breeds – Aberdinangus (AA), Hereford (HF) and Limousin (LI) bulls. The bulls were fattened on Latvian and Lithuanian farms, mainly using grass forage. The breed and age of bulls before slaughter significantly affected all slaughter results, except for fat class. From the meat chemical composition traits, the bull breed and age before slaughter had a significant effect only on the protein content. LI bulls showed the highest carcass weight 301.1±6.8 kg (p<0.05), dressing percentage 58.2±1.1% (p<0.05) and conformation score 3.56±0.18 points. The best fattened carcasses were obtained from AA bulls - 2.43±0.20 points. Muscle samples of musculus longissimus (M. longissimus) bulls of LI breed showed higher content of moisture (72.0±1.0%), protein (23.0±0.2%), ash (1.1±0.0%) and cholesterol (56.7±6.6 mg 100 g⁻¹). AA breed bulls showed higher total fat (6.6±1.2%) and iron content (13.1±0.6 mg). The highest pH was observed in the meat obtained from AA bulls – 6.0±0.1, LI and HF breed bulls showed pH 5.8±0.0 and 5.8±0.1 respectively. Correlation analysis showed a significant, strong positive correlation between cold carcass weight and dressing percentage for AA and LI bulls, r=0.90 and r=0.88, respectively. For LI breed bulls, a strong positive correlation was also found between the cold carcass weight and the conformation score (r=0.98, p<0.01).

Smoked sprats are delicious and nutritionally valuable product. Besides protein, it contains high amount of unsaturated fatty acids and fat soluble vitamins. Nowadays, human interest for fish product consumption is increasing. It leads to the demand for increased shelf life of the smoked sprats. One way to prolong the shelf life is to use some pre-treatment prior to smoking. The aim of study was to analyse the effect of pre-treatment on smoked Baltic sprat quality and microbiological parameters. Various compositions of brine using salts (NaCl, CaCl₂) and acetic acid in different proportions were used for fresh sprat pre-treatment. Pre-treatment had the influence on physical parameters; pre-treated samples had higher salt and lower moisture content, and lower pH, which allowed prolonging the shelf life of smoked sprats. The highest pH was in the control sample 6.6, and it allowed growth of yeasts, moulds, Pseudomonas spp., and mesophilic and facultative anaerobic microorganisms. The results demonstrated that after two-week storage of the smoked sprats the growth of moulds (1×10² CFU g⁻¹) was observed only for smoked sprats without pre-treatment (control sample), indicating the positive effect of pre-treatment. Salmonella spp., Clostridium perfingens, Listeria monocytogenes, and Escherichia coli were not detected in any of the analysed samples. After pre-treatment in brine, containing combination of NaCl and CaCl₂, smoked fish had darker colour compared to control sample or sample with sodium chloride only. Any of applied pre-treatments, except brine containing NaCl, made firmer texture of the smoked fish.

In the market of the Latvia different wood surface coating materials suitable for use in outdoor conditions are offered, but available information on the efficiency of these against direct water exposure is insufficient. For structural timber building elements, such as glued laminated timber (GLT), the surface coating should be applied taking into account technological, visual or colour changes (ISO 7724:1984) and – last, but not least – economic aspects are considered. Wood surfaces coated with coating materials, such as varnishes, paints, etc. can stabilize some properties such as movement of moisture content, dimensional changes and attack by microorganisms and fungi. The changes in the moisture content of timber may influence such important parameters as mechanical properties and the total life time of the structural timber elements. A study has been conducted with the aim of assessing the efficiency of coating materials used for wood protection against water absorption. In this study, six different commercial coating products used for the treatment of spruce (Picea Abies L. Karst.) and pine (Pinus Sylvestris L.) samples were tested. The efficiency of different coating substances was assessed using two modified test methods according to the standards EN 382-2 (1994) and EN 927-5 (2006), determining the surface water absorption after immersion in water for 24 h and the dynamics of water absorption of the glued laminated timber for 696 h kept in water. As a result of the study, it has been ascertained that organic solvent-based commercial coating products are more efficient against short-term and long-term wood water absorption compared to oil-based coating materials.

Reduced tillage is considered as one of the main tools to save biological diversity; however, it increases pressure of diseases, including wheat leaf blotches. The aim of present study was to clarify the impact of reduced soil tillage on the development of winter wheat leaf blotches in different schemes of crop rotation. The impact of different growing technologies on the severity of winter wheat disease was evaluated in a two-factorial experiment: A – soil tillage system, and B – different combinations of wheat pre-pre-crop and pre-crop (wheat, oilseed rape, barley and faba beans). Diseases were assessed every 10 days approximately and total impact of diseases was evaluated by calculating AUDPC (Area under Diseases Progress Curve). Tan spot, caused by Pyrenophora tritici-repentis was dominated disease over the long period, regardless of meteorological conditions. Development of Septoria leaf blotch was not influenced by neither crop rotation nor soil tillage. The level of tan spot was essentially higher after wheat, regardless of the pre-pre-crop. Reduced soil tillage promoted severity of tan spot. Ploughing mitigated effect of previous crops and differences in tan spot level were insignificant. Despite many positive effects of conservation tillage, increasing of fungicide treatment could be necessary, in conditions, when the tan spot is most devastating and widespread wheat disease.

It is stated that the strategic benchmark for transformational changes in the economy is currently low-carbon production, the achievement of which is possible to provide with the consistent application of an arsenal of strict control measures, in particular, the introduction of state audit of low-carbon production. The effectiveness of the mechanism for ensuring the implementation of the UN Framework Convention on Climate Change has been assessed. The necessity of implementation in the domestic practice of the state audit of low-carbon production by the decoupling approach is proved. The agri-business portfolio has been formed according to the decoupling approach as one of the leaders in greenhouse gas pollution. The author's economic and mathematical models of estimation according to the decoupling approach of the impact of branches of crop and livestock production on environmental pollution are proposed. The dependence of greenhouse gas emissions on the volume of gross output of agricultural production, capital investment and current expenditures on environmental protection has been established. The results of a comparative analysis of the realism of forecasts of changes in greenhouse gas emissions according to the methodology of the National Academy of Sciences of Ukraine and the author's methodology are highlighted. A roadmap for the introduction of a state low-carbon decoupling audit of the state decoupling audit has been proposed as part of the preparation of the second nationally determined contribution to the Paris Agreement. The expediency of supplementing GRI 300 “Environmental Disclosures” with the group of indicators GRI-305.5 “Reduction of GHG emissions”, formed by the decoupling approach, is substantiated.

Feeding young animals is a very important stage during their growing-up period, but in order to provide them with essential nutrients, they are fed with liquid feeds, whole milk substitute in particular (WMS). The technique for reconstituting WMS consists of dissolving it in water followed by mixing, but it is significant to follow the cooking recipe strictly, so it is necessary to develop a system with a feeding (dosing) device that will make it possible to solve this problem. Theoretical and experimental studies of the feeding device have been conducted in order to optimize the technological process of mixing liquid feed. Theoretically, the quality of determining the mixture during dosing was established for the purpose of further research. The influence of the design and technological parameters of the feeding device was experimentally studied, and its efficiency was evaluated. It was found that as the inclination angle α increases from 67,5⁰ to 70⁰, the rotation speed n being from 850 to 1500 min⁻¹, the maximum probability of staying in the tolerance field ΔP=96% is reached, and feed discharge Q ranges from 540 to 660 kg h⁻¹. The research makes it possible to develop a feeding device at the design stage, meeting the requirements of the recipe, having high discharge rates and the lowest energy consumption.

Although poor use of contraceptives and high desire for children is characteristic of sub-Saharan Africa, this demographic challenge is more peculiar to more disadvantaged segments of the population like rural farmers. This study was designed to examine current use of modern family planning and fertility intention among women farmers of reproductive age in Ido and Ona-ara Local Government Areas of Ibadan, Nigeria. Using cross-sectional survey design, semi-structured questionnaire were administered via structured-interview to randomly and systematically selected 408 respondents. Chi-square was used to show significance of associations between pairs of variables. Contingency co-efficient was used to examine extent of significant associations. Results indicate that majority of respondents (77%) desired additional children, the mean number of children that respondents already have is 2.94±1.35 while mean fertility intention is 1.85±1.44. The proportion of current users of modern family planning is 45.6%. The use of oral pills (30.6%) is most popular among respondents. There is no significant association between current use of modern family planning and fertility intention among married and divorced respondents, among respondents in all the age sub-groups, and among respondents with no formal education or secondary education (p > 0.05), but there is among respondents with primary and tertiary education (p < 0.05). The synergy between the use of modern family planning and fertility intention among women farmers in the study area is notable but requires significant progression. Having primary education and tertiary education is significantly associated respectively with lower and higher use of modern family planning in relation to fertility intention. Education is an important element of fertility dynamics among women farmers in the study area.

One of the mechanisms for enhancing innovative processes in the industry is the application of the concept of the “four-link spiral”. In contrast to the 3-link spiral, this model as one of the most important components includes a “society”, acting as one of the actors of innovative transformations. Firstly, it is society that is the main consumer of innovative products being created and, thereby, establishes “requirements”, forming demands for the quality and parameters of future products; secondly, society, in turn, acts as the initiator and generator of innovations, forming the so-called “social capital” necessary for the implementation of directly innovative transformations. In this scientific work, the problems of the formation of a “smart specialization” strategy for the innovative development of the industrial sector of the national economic system based on the application of the four-link spiral concept are investigated. A system of quantitative indicators for assessing the innovative level of industrial development is presented. The experience of introducing the concept of a four-link spiral as a mechanism of innovative development of industry (on the example of the Republic of Belarus and the Russian Federation) is given. The aim of the article is to describe innovation processes in the Russian Federation and the Republic of Belarus and to develop an innovation transfer model.

An urgent problem is drying and processing of the wet dispersed waste, obtained in the production of food products, which can then be efficiently used as a fertiliser, for feeding livestock or as biofuel. A new design of a vibrating fluidised bed dryer has been developed, which, with low energy consumption, provides a pre-set productivity and the required final moisture content. The process of vertical oscillations of the body of a vibration dryer, together with the food waste contained in it, is analysed analytically, the necessary equivalent scheme is built, on the basis of which differential equations of the vertical oscillations of the body are compiled, their analytical solutions are obtained, and a numerical calculation is performed on a PC using the developed program. Rational parameters of the vibration dryer, providing vibroboiling of the mass of the food waste, have been determined: the body mass m = 250 ... 510 kg; the debalance mass md = 10… 15 kg; the number of revolutions of the debalance electric motor nd = 1950 ... 2650 rpm ∙ min ∙¹; maximum stiffness of the support springs Cₚ = 8∙10⁵ N∙m–¹; the diameter of the centre of mass of the debalances dd = 0.01 m. In addition, as a result of the thermophysical theoretical and experimental studies of the vibration drying process, the following optimal design and technological parameters of the vibration dryer were obtained: the heat transfer area Sₜ.ₚ.ₙ= 4.15 m²; the radius of the heating pipe rₜ= 0.1 m; the length of the heating pipe lₜ = 3 m; the number of heating pipes nₜ= 50; the heat transfer coefficient Kₚ= 2500; the final temperature of the dried waste tₒ₂ = 100 ºС.

Unemployment is a major issue in Nigeria because the youth finds it difficult or impossible to secure jobs that meet their expectations. There appears to be a mismatch between graduate skills and those sought by employers. The study investigated the effect of International Institute of Tropical Agriculture (IITA) youth Agripreneurs (IYA) programme on employment and income generation on cattle fattening enterprise under the N2Africa Borno youth project. A two-stage sampling procedure was used to select IYA participants and non-participants. Results revealed that the majority of respondents were males in both categories. It also indicated that youths who are in their productive age are more into cattle fattening enterprise in both categories. The study also found that, unemployment and skill acquisition are the main driving reasons for participating in IYA. It also indicated that both categories of respondents’ required external capital support for start-up of their enterprise, and that IYA programme participants on the average earn more income per month than non-participants. IYA programme participants generated more employment opportunities which implied that the programme had not only empowered participants but also made the participants’ become employers. The study recommended that there is a need to support youths with funds, access to trainings on capacity development and skill acquisition to make them self-employed and job creators.