Affiner votre recherche
Résultats 1-2 de 2
Determination and optimization of feeding device [parameters] in the plant for preparing liquid feed mixtures Texte intégral
2021
Solonshchikov, P., Vyatka State Agricultural Academy, Kirov (Russian Federation) | Savinykh, P., Federal Agrarian Scientific Centre of the North-East named after N.V. Rudnitsky, Kirov (Russian Federation) | Ivanovs, S., Latvia Univ. of Life Sciences and Technologies, Jelgava (Latvia)
Feeding young animals is a very important stage during their growing-up period, but in order to provide them with essential nutrients, they are fed with liquid feeds, whole milk substitute in particular (WMS). The technique for reconstituting WMS consists of dissolving it in water followed by mixing, but it is significant to follow the cooking recipe strictly, so it is necessary to develop a system with a feeding (dosing) device that will make it possible to solve this problem. Theoretical and experimental studies of the feeding device have been conducted in order to optimize the technological process of mixing liquid feed. Theoretically, the quality of determining the mixture during dosing was established for the purpose of further research. The influence of the design and technological parameters of the feeding device was experimentally studied, and its efficiency was evaluated. It was found that as the inclination angle α increases from 67,50 to 700, the rotation speed n being from 850 to 1500 minE−1, the maximum probability of staying in the tolerance field ΔP=96% is reached, and feed discharge Q ranges from 540 to 660 kg hE−1. The research makes it possible to develop a feeding device at the design stage, meeting the requirements of the recipe, having high discharge rates and the lowest energy consumption.
Afficher plus [+] Moins [-]The efficiency of different wood coatings against water surface absorption Texte intégral
2021
Iejavs, J., Forest and Wood Products Research and Development Inst., Ltd., Jelgava (Latvia) | Ruluks, O., Forest and Wood Products Research and Development Inst., Ltd., Jelgava (Latvia) | Laiveniece, L., Forest and Wood Products Research and Development Inst., Ltd., Jelgava (Latvia) | Jakovlevs, V., Latvia Univ. of Life Sciences and Technologies, Jelgava (Latvia) | Pugovics, K., Latvia Univ. of Life Sciences and Technologies, Jelgava (Latvia) | Lise, S., Latvia Univ. of Life Sciences and Technologies, Jelgava (Latvia) | Spulle, U., Latvia Univ. of Life Sciences and Technologies, Jelgava (Latvia)
The efficiency of different wood coatings against water surface absorption Texte intégral
2021
Iejavs, J., Forest and Wood Products Research and Development Inst., Ltd., Jelgava (Latvia) | Ruluks, O., Forest and Wood Products Research and Development Inst., Ltd., Jelgava (Latvia) | Laiveniece, L., Forest and Wood Products Research and Development Inst., Ltd., Jelgava (Latvia) | Jakovlevs, V., Latvia Univ. of Life Sciences and Technologies, Jelgava (Latvia) | Pugovics, K., Latvia Univ. of Life Sciences and Technologies, Jelgava (Latvia) | Lise, S., Latvia Univ. of Life Sciences and Technologies, Jelgava (Latvia) | Spulle, U., Latvia Univ. of Life Sciences and Technologies, Jelgava (Latvia)
In the market of the Latvia different wood surface coating materials suitable for use in outdoor conditions are offered, but available information on the efficiency of these against direct water exposure is insufficient. For structural timber building elements, such as glued laminated timber (GLT), the surface coating should be applied taking into account technological, visual or colour changes (ISO 7724:1984) and – last, but not least – economic aspects are considered. Wood surfaces coated with coating materials, such as varnishes, paints, etc. can stabilize some properties such as movement of moisture content, dimensional changes and attack by microorganisms and fungi. The changes in the moisture content of timber may influence such important parameters as mechanical properties and the total life time of the structural timber elements. A study has been conducted with the aim of assessing the efficiency of coating materials used for wood protection against water absorption. In this study, six different commercial coating products used for the treatment of spruce (Picea Abies L. Karst.) and pine (Pinus Sylvestris L.) samples were tested. The efficiency of different coating substances was assessed using two modified test methods according to the standards EN 382-2 (1994) and EN 927-5 (2006), determining the surface water absorption after immersion in water for 24 h and the dynamics of water absorption of the glued laminated timber for 696 h kept in water. As a result of the study, it has been ascertained that organic solvent-based commercial coating products are more efficient against short-term and long-term wood water absorption compared to oil-based coating materials.
Afficher plus [+] Moins [-]The Efficiency of Different Wood Coatings against Water Surface Absorption Texte intégral
2021
Iejavs, Jānis | Ruļuks, Oskars | Laiveniece, Laura | Jakovļevs, Vilnis | Pugovičs, Kārlis | Liše, Sigita | Spulle, Uldis
In the market of the Latvia different wood surface coating materials suitable for use in outdoor conditions are offered, but available information on the efficiency of these against direct water exposure is insufficient. For structural timber building elements, such as glued laminated timber (GLT), the surface coating should be applied taking into account technological, visual or colour changes (ISO 7724:1984) and – last, but not least – economic aspects are considered. Wood surfaces coated with coating materials, such as varnishes, paints, etc. can stabilize some properties such as movement of moisture content, dimensional changes and attack by microorganisms and fungi. The changes in the moisture content of timber may influence such important parameters as mechanical properties and the total life time of the structural timber elements. A study has been conducted with the aim of assessing the efficiency of coating materials used for wood protection against water absorption. In this study, six different commercial coating products used for the treatment of spruce (Picea Abies L. Karst.) and pine (Pinus Sylvestris L.) samples were tested. The efficiency of different coating substances was assessed using two modified test methods according to the standards EN 382-2 (1994) and EN 927-5 (2006), determining the surface water absorption after immersion in water for 24 h and the dynamics of water absorption of the glued laminated timber for 696 h kept in water. As a result of the study, it has been ascertained that organic solvent-based commercial coating products are more efficient against short-term and long-term wood water absorption compared to oil-based coating materials.
Afficher plus [+] Moins [-]