Challenges in making plywood from oil palm trunk
2006
Anis Mokhtar | Kamarudin Hassan | Ismadi Ismail | Choo, Y.M. | Mohd. Basri Wahid
Oil palm trunk has its own characteristics as compare to tropical wood. The process of making plywood from oil palm trunks need some adjustment during the primary processing to achieve maximum recovery of the materials. Two types of peelers were used to peel the trunk and the resulting veneers were than layered with grain direction perpendicular to each other for the production of plywood. Veneer drying was controlled under the optimum temperature until the veneers reached maximum moisture content of about 3%. The temperature applied ranges between 130-150°C and the drying time was about one hour. Two types of binders were used with different formulations for indoor and outdoor purposes. After gluing, the veneers were subjected to cold pressing in order to straighten the veneers and to transfer the resin to adjacent veneer members. The resulting plywood with different thickness was then subjected to hot pressing at varying temperature (105-110°C), pressure (40-135 kg/cm2) and time (30 sec - 10 min). The oil palm trunk plywood was subjected to physical and mechanical testing and the results shows that oil palm trunk plywood meets the strength requirements as stipulated in the Japanese Standard (JAS 233:2003).
Показать больше [+] Меньше [-]Ключевые слова АГРОВОК
Библиографическая информация
Эту запись предоставил Universiti Putra Malaysia