Highly efficient CO₂ capture with simultaneous iron and CaO recycling for the iron and steel industry
2016
Tian, Sicong | Jiang, Jianguo | Yan, Feng | Li, Kaimin | Chen, Xuejing | Manovic, Vasilije
An efficient CO₂ capture process has been developed by integrating calcium looping (CaL) and waste recycling technologies into iron and steel production. A key advantage of such a process is that CO₂ capture is accompanied by simultaneous iron and CaO recycling from waste steel slag. High-purity CaO-based CO₂ sorbents, with CaO content as high as 90 wt%, were prepared easily via acid extraction of steel slag using acetic acid. The steel slag-derived CO₂ sorbents exhibited better CO₂ reactivity and slower (linear) deactivation than commercial CaO during calcium looping cycles. Importantly, the recycling efficiency of iron from steel slag with an acid extraction is improved significantly due to a simultaneous increase in the recovery of iron-rich materials and the iron content of the materials recovered. High-quality iron ore with iron content of 55.1–70.6% has been recovered from waste slag in this study. Although costing nearly six times as much as naturally derived CaO in the purchase of feedstock, the final cost of the steel slag-derived, CaO-based sorbent developed is compensated by the byproducts recovered, i.e., high-purity CaO, high-quality iron ore, and acetone. This could reduce the cost of the steel slag-derived CO₂ sorbent to 57.7 € t⁻¹, appreciably lower than that of the naturally derived CaO. The proposed integrated CO₂ capture process using steel slag-derived, CaO-based CO₂ sorbents developed appears to be cost-effective and promising for CO₂ abatement from the iron and steel industry.
Показать больше [+] Меньше [-]Ключевые слова АГРОВОК
Библиографическая информация
Эту запись предоставил National Agricultural Library