Tuning Porous Networks in Polyimide Aerogels for Airborne Nanoparticle Filtration
2017
Zhai, Chunhao | Jana, Sadhan C.
The suitability of monolithic polyimide aerogels as filter media for removal of airborne nanoparticles was investigated in this work by considering two solvents, N-methylpyrrolidone (NMP) and dimethylformamide (DMF) for tuning of meso- and macropore content. Polyimide gels were synthesized from the chemical reactions between solutions of pyromellitic dianhydride, 2,2′-dimethylbenzidine, and 1, 3, 5-triaminophenoxylbenzene. The gels were dried via supercritical drying in CO₂ to obtain the aerogels. The porosity of polyimide aerogels was varied by changing the initial concentration of the solids in the solutions in the range of 2.5–10 wt %. The resulting aerogels show high porosity (91–98%), high specific surface area (473–953 m²/g), low bulk density (0.025–0.12 g/cm³), and solvent dependent macro- and mesopore content. The monoliths with bulk density of >0.05 g/cm³ produced high values of nanoparticle filtration efficiency (>99.95%) with air permeability of the order of 10–¹⁰ m². A strong proportional relationship was observed between the macropore content and air permeability and between the mesopore content and high filtration efficiency. Specimens prepared in DMF and NMP offered the same level of filtration efficiency, but the former provided a factor of 2 higher air permeability due to much greater proportion of macropores.
Показать больше [+] Меньше [-]Ключевые слова АГРОВОК
Библиографическая информация
Эту запись предоставил National Agricultural Library