Quantifying the relative importance of major tracers for fine particles released from biofuel combustion in households in the rural North China Plain

Biomass burning tracers have been widely used to identify biomass burning types, but such tools can sometimes cause large uncertainties in the source attribution studies of PM₂.₅ (particles with an aerodynamic diameter of smaller than 2.5 μm). To quantify the relative importance of the major biomass burning tracers in PM₂.₅ released from biofuels combusted in the North China Plain, combustion experiments under the smoldering and flaming combustion conditions were conducted using nine types of typical household biofuels including two types of agricultural wastes, five types of hardwoods, one softwood, and one mixed wood briquette. PM₂.₅ samples were collected from the combustion experiments and source profiles of PM₂.₅ were thus determined for various biofuels under the two different combustion conditions. Carbonaceous species including organic carbon (OC) and elemental carbon (EC) were the major chemical components of the PM₂.₅ released from combustion of all the tested biofuels, with mass fractions of 37–45% and 4–7% under the smoldering condition and 11–25% and 7–29% under the flaming condition, respectively. Higher mass fractions of water-soluble inorganic ions (WSIIs, e.g., K⁺ and Cl⁻) in PM₂.₅ were observed under the flaming than smoldering combustion condition, while anhydrosugars (levoglucosan (LG) and mannosan (MN)) presented in an opposite pattern. The average LG/MN ratio in PM₂.₅ changed significantly with biofuel type (20–55 for agricultural wastes, 10–22 for hardwoods (except elm) and 3–6 for softwood), but varied little with combustion condition. In contrast, the K⁺/LG ratio in PM₂.₅ varied significantly between smoldering (<0.2) and flaming (>0.6) combustion conditions for all the biofuel types except softwood. Results from this study suggested that the ratio LG/MN was the best tracer for identifying the biofuel types and the ratio K⁺/LG is suitable for identifying the combustion conditions in this region.