Study of an energy-integrated biodiesel production process using supercritical methanol and a low-cost feedstock
2015
Manuale, Debora L. | Torres, Gerardo C. | Vera, Carlos R. | Yori, Juan C.
The supercritical biodiesel production process has some disadvantages such as: high reaction temperature, large molar methanol-to-oil ratios (R) and large energy consumption. To mitigate these problems, an energy integrated process in which biodiesel is obtained in a continuous tubular reactor operating at a reaction temperature of 280°C, R=20, a residence time of 1h and a pressure of 110bar, is proposed. A low-cost lipid feedstock (chicken oil) was used as raw material for testing the process. The enthalpy content of the stream exiting the supercritical reactor was used to eliminate the unreacted methanol in an adiabatic flash drum. The operating conditions of the adiabatic flash were optimized to meet the specification of water and methanol content in the biodiesel phase and minimize the ester and acid content in the vapor phase. These conditions were: P=0.1bar and T=178°C. For these conditions the methanol content is 88–90% in the vapor phase and lower than 0.2% in the biodiesel phase. A scheme was developed for an energy integrated process maximizing the heat recovery. Composition, temperature and pressure of the streams were determined and also the amount of heat exchanged in each unit. In order to fulfill the quality restrictions the final content of FFA in the biodiesel product had to be further adjusted by adsorption over bleaching silica.
Показать больше [+] Меньше [-]Ключевые слова АГРОВОК
Библиографическая информация
Эту запись предоставил National Agricultural Library