Characteristics of refractory organics in industrial wastewater treated using a Fenton-coagulation process
2021
Ding, Ran | Zhang, Dandan | Gao, Yingxin | Chen, Xing | Yang, Min
It is a challenging environmental issue to develop a cost-efficient approach for the removal of low-concentration refractory organics in industrial wastewater. In this study, the Fenton-coagulation process was utilised to remove the organics from the industrial effluent. The operational conditions of the Fenton-coagulation process were optimised, and then, the molecular weight (MW) and resin fraction distribution of dissolved organic matter (DOM) were investigated before and after the Fenton-coagulation process. The results showed that the efficiency of organic matter removal was affected by the Fe²⁺/H₂O₂ molar ratio, pH, and reaction time. The removal rate of chemical oxygen demand (COD) by Fenton-coagulation process reached 37.8% under the following conditions: pH = 4.0 − 5.0, H₂O₂ concentration = 34 mg/L, Fe²⁺/H₂O₂ molar ratio = 1.5, and reaction time = 120 min. The resin fraction distribution results showed that hydrophobic bases (HoB) were almost completely removed, and the removal rate of hydrophobic acids (HoA) reached 58%, while hydrophilic matter (HiM) became the dominant form in the final effluent after the Fenton-coagulation process due to the appearance of hydrophilic charged fractions (HiC). The results were explained by a two-step mechanism (Fenton oxidation and Fe³⁺ coagulation). According to the molecular weight (MW), 35.7% removal of the main fractions of organic matter with MW < 1 kDa was achieved. Furthermore, a pilot test proved that the final effluent quality after the Fenton-coagulation process conformed to the first class of the A discharge standard of pollutants for municipal wastewater treatment plants in Tianjin.
Показать больше [+] Меньше [-]Ключевые слова АГРОВОК
Библиографическая информация
Эту запись предоставил National Agricultural Library