Spherical potassium intercalated activated carbon beads for pulverised fuel CO2 post-combustion capture
2015
Liu, Jingjing | Sun, Nannan | Sun, Chenggong | Liu, Hao | Snape, Colin | Li, Kaixi | Wei, Wei | Sun, Yuhan
Spherical carbon beads with a uniform diameter of ca. 0.6–0.8mm and high mechanical strength can be prepared by hydrothermal synthesis. To optimise the performance of these adsorbents for pulverised fuel post-combustion capture, the efficacy of potassium intercalation via a KOH treatment has been investigated, deliberately using nitrogen-free phenolic resin derived activated carbon (AC) beads so that the enhanced CO2 adsorption achieved by potassium intercalation could be delineated from any other effects. At 25°C and CO2 partial pressure of 0.15bar, the adsorption capacity of K-intercalated ACs nearly doubled from 0.79mmol/g for the untreated carbons to 1.51mmol/g whilst the effect on the morphology and mechanical strength is relatively small. It was found that only slightly more than ca. 1wt.% of K is required to give the maximum benefit from intercalation that increases the surface polarity and the affinity towards CO2. The notably increased CO2 uptake of the K-AC beads as a result of modest increase in adsorption heat (32–40kJ/mol compared to 27kJ/mol for the original AC), coupled with the fast adsorption kinetics, suggest that the overall energy penalty is potentially superior to strongly basic polyethyleneimine and other amine-based solid adsorbent systems for carbon capture.
Показать больше [+] Меньше [-]Ключевые слова АГРОВОК
Библиографическая информация
Эту запись предоставил National Agricultural Library