Pengaruh carbon black pada pembuatan plastik untuk irigasi sistem tetes
2001
Yuniari, Arum | Nurhajati, Dwi Wahini | Karsiati, Niken
The objective of this experiment was to know the influence carbon black was added to the plastics for drip irrigation systems. Plastics of 0,2 mm thickness for drip irrigation system was made from mixing of lwo density polyethylene (LDPE), high density polyethylene (HDPE) and carbon black by a blown film machine on the fixed processing condition. The investigated carbon black content were 0; 2,5; 5; 7,5; and 10 phr respectively and LDPE/HDPE ratio were 0/100, 50/50, 100/0 respectively. The physical properties tes showe and increasing of carbon black decreasing tensile strength, elongation at break, tear strength and brittleness. The best formulation was consist of HDPE 100 phr and carbon black 10 phr, with the physical properties as follows : tensile strength 158 kg/cm2, elongation at break 140%, and tear strength 91,46 kg/cm2.
Показать больше [+] Меньше [-]Ключевые слова АГРОВОК
Библиографическая информация
Эту запись предоставил National Agricultural Library