Determination of the Composition of Bio-Oils from the Pyrolysis of Orange Waste and Orange Pruning and Use of Biochars for the Removal of Sulphur from Waste Cooking Oils
Sánchez-Borrego, Francisco-José | García-Criado, Noelia | García-Martín, Juan F. | Álvarez-Mateos, Paloma
Waste generated in the agri-food sector is a potential source of biomass and other products of high added value. In this work, the pyrolysis of orange waste and orange pruning was carried out to produce adsorbent biochars and characterise the bio-oils aiming for high-added-value compounds. Pyrolysis was carried out in a vertical tubular furnace on the laboratory scale modifying the temperature (400–600 °C), the heating ramp (5–20 °C·min⁻¹) to reach the previous temperature and the inert gas flow rate (30–300 mL Ar·min⁻¹) throughout the furnace. The most suitable conditions for obtaining biochar were found to be 400 °C, 5 °C·min⁻¹, and 150 mL Ar·min⁻¹ for orange waste, and 400 °C, 10 °C·min⁻¹, and 150 mL Ar·min⁻¹ for orange pruning. Thermogravimetric analysis showed higher thermal stability for orange pruning due to its higher lignin content (20% vs. 5% wt. on a wet basis). The bio-oil composition was determined by GC-MS. Toluene and 5-hydroxymethylfurfural were the main compounds found in orange waste bio-oils, while orange pruning bio-oils were composed mainly of 4-hydroxy-4-methyl-2-pentanone. Finally, the removal of the sulphur content from waste cooking oil was assayed with the biochars from both orange waste and orange pruning, whose BET surface areas were previously determined. Despite their low specific surface areas (≤1 m²·g⁻¹ for orange waste biochars and up to 24.3 m²·g⁻¹ for orange pruning biochars), these biochars achieved a reduction of the initial sulphur content of the waste cooking oil between 66.4% and 78.8%.
Показать больше [+] Меньше [-]Ключевые слова АГРОВОК
Библиографическая информация
Эту запись предоставил National Agricultural Library