Oil extraction of oleic sunflower seeds by twin screw extruder: influence of screw configuration and operating conditions
2005
Kartika, I.A. | Pontalier, P.Y. | Rigal, L.
The objective of this study was to investigate the effects of screw configuration, position of screw elements and spacing between them allowing to realize oil extraction of oleic sunflower seeds on a twin-screw extruder. Experiments were conducted using a co-rotating twin-screw extruder (Model Clextral BC 45, France). Twelve screw profiles were examined to define the best performance (oil extraction yield, oil quality, mean residence time, and thermo-mechanical energy input) by studying the influence of operating conditions temperature pressing, screw rotation speed and seed input flow rate. Generally, the position and spacing between two screw elements affected oil extraction yield. An increase of oil extraction yield was observed when the reversed screw elements were configured with increased spacing between elements or/and with smaller pitch screw. In addition, more oil extraction yield was produced as the temperature pressing, screw rotation speed and seed input flow rate were decreased. The higher oil extraction yield was obtained under operating conditions 80 °C, 60 rpm and 24 kg/h. Furthermore, the operating parameters influenced energy input and mean residence time of matter. Both energy input and mean residence time increased when the temperature pressing increased. However, increase of screw rotation speed and seed input flow rate decreased mean residence time. Effect of the operating parameters on oil quality was unimportant. In all experiments tested, the oil quality was very good. The acid value was below 2 mg KOH/g of oil and total phosphorus content was very poor, below 40 mg/kg.
Показать больше [+] Меньше [-]Ключевые слова АГРОВОК
Библиографическая информация
Эту запись предоставил National Agricultural Library