Use of 2-Ethylhexyl Nitrate for the Slow Pyrolysis of Plastic Waste
2022
Jochen Uebe | Audrone Zukauskaite | Zilvinas Kryzevicius | Gintare Vanagiene
Plastics are widely used and are part of modern life. Recycling of plastic waste can be achieved by pyrolysis. Conventional pyrolysis of plastic waste takes place at temperatures higher than 450 °:C, because the oil yield is higher. In this study, we examined if an initiator for radical reactions can achieve the conventional pyrolysis of HDPE and PP even at low temperatures. To support the onset of decomposition of HDPE and PP at low temperatures, 2-ethylhexyl nitrate (2-EHN) was added. 2-EHN forms radicals already at about 150 °:C and can thus initiate the pyrolysis process at lower temperatures. Pyrolysis oil yields increased, especially for HDPE pyrolysis, at the expense of the gaseous (minus 50%) and especially the solid fraction (minus 80%). For PP and HDPE pyrolysis oil, the proportion of carbon compounds shifted toward shorter-chain, less cyclic compounds, and there was an improvement in the physicochemical property profile: the heating values of both oils were slightly higher and the pour point significantly lower, in line with the shift toward shorter-chain compounds. The diesel content and, to a lesser extent, the gasoline content increased at the expense of waxes and other high-boiling compounds.
Показать больше [+] Меньше [-]Ключевые слова АГРОВОК
Библиографическая информация
Эту запись предоставил Multidisciplinary Digital Publishing Institute