This study derives an analytical solution of a one-dimensional (1-D) Advection-Dispersion Equation (ADE) for solute transport with two contaminant sources incorporating the source term. Groundwater velocity is considered as a linear function of space while the dispersion as a nth power of velocity and analytical solutions are obtained for , and . The solution is derived using the Generalized Integral Transform Technique (GITT) with a new regular Sturm-Liouville Problem (SLP). Analytical solutions are compared with numerical solutions obtained in MATLAB pedpe solver and are found to be in good agreement. The obtained solutions are illustrated for linear combination of exponential input distribution and its particular cases. The dispersion coefficient and temporal variation of the source term on the solute distribution are demonstrated graphically for the set of input data based on similar data available in the literature. As an illustration, model predictions are used to estimate the time histories of the radiological doses of uranium at different distances from the sources boundary in order to understand the potential radiological impact on the general public for such problem.

The article presents the results of a study of heavy metals in snow and groundwater within the industrially developed Arkhangelsk agglomeration, which is the largest among urban formations in the Arctic zone of Russia. This article describes the results of research on the territories of three suburban community garden plots used by residents of the cities of the Arkhangelsk, Severodvinsk and Novodvinsk agglomeration for recreation, growing fruits and vegetables, picking wild berries and mushrooms, and short-term residence. In groundwater samples taken from wells, the average concentrations of heavy metals decrease in the following order: Fe > Mn > Zn > Cr > Ni > Cu > Ti > V > Pb > U > As > Co > Mo > Sb > Cd. A comparison of metal concentrations in groundwater with WHO and SanPiN standards showed that only Fe and Mn exceeded the permissible limits, for the rest of the studied metals, the concentrations were significantly below the permissible limits. The study of heavy metals in the snow showed a similar order of decrease in concentrations to groundwater and total concentrations of soluble metal fractions. This fact indicates the migration of heavy metals into groundwater after the spring snowmelt and the fact the main source of groundwater pollution is the atmospheric channel. According to the values of the total areal pollution of the snow cover with heavy metals, the most polluted are suburban garden plots in the area of the Arkhangelsk city – 216.91 mg/m2. The results of the principal component analysis showed that the main sources of snow cover pollution with heavy metals in the suburban areas of the Arkhangelsk agglomeration were thermal power plants, machine-building and metallurgical plants, a solid waste landfill, and vehicles. The calculation of the heavy metal pollution index for water did not reveal a significant anthropogenic impact. However, the indices assessing the amount of metals (heavy metal evaluation index), toxicity (heavy metal toxicity load), non-carcinogenic risk (hazard index), and carcinogenic risk indicate a high level of heavy metal pollution of the studied waters, as well as the unsuitability of groundwater and melted snow as drinking water. Metals such as Fe, Mn, Ni, Cu, and Pb make the greatest contribution to the quality indices of the studied waters.

Plastic usage increases year by year, and the growing trend is projected to continue. However as of 2017, only 9% of the 9 billion tons of plastic ever produced had been recycled leaving large amounts of plastics to contaminate the environment, resulting in important negative health and economic impacts. Curbing this trend is a major challenge that requires urgent and multifaceted action. Based on scientific and gray literature mainly published during the last 10 years, this review summarizes key solutions currently in use globally that have the potential to address at scale the plastic and microplastic contaminations from source to sea. They include technologies to control plastics in solid wastes (i.e. mechanical and chemical plastic recycling or incineration), in-stream (i.e. booms and clean-up boats, trash racks, and sea bins), and microplastics (i.e. stormwater, municipal wastewater and drinking water treatment), as well as general policy measures (i.e. measures to support the informal sector, bans, enforcement of levies, voluntary measures, extended producer responsibility, measures to enhance recycling and guidelines, standards and protocols to guide activities and interventions) to reduce use, reuse, and recycle plastics and microplastics in support of the technological options. The review discusses the effectiveness, capital expenditure, and operation and maintenance costs of the different technologies, the cost of implementation of policy measures, and the suitability of each solution under various conditions. This guidance is expected to help policymakers and practitioners address, in a sustainable and cost-efficient way, the plastic and microplastic management problem using technologies and policy instruments suitable in their local context.

It is essential to increase food production to meet the projected population increase while reducing environmental loads. Biological nitrification inhibition (BNI)-enabled wheat genetic stocks are under development through chromosome engineering by transferring chromosomal regions carrying the BNI trait from a wild relative (Leymus racemosus (Lam.) Tzvelev) into elite wheat varieties; field evaluation of these newly developed BNI-wheat varieties has started. Ten years from now, BNI-enabled elite wheat varieties are expected to be deployed in wheat production systems. This study aims to evaluate the impacts of introducing these novel genetic solutions on life cycle greenhouse gas (LC-GHG) emissions, nitrogen (N) fertilizer application rates and N-use efficiency (NUE). Scenarios were developed based on evidence of nitrification inhibition and nitrous oxide (N2O) emission reduction by BNI crops and by synthetic nitrification inhibitors (SNIs), as both BNI-wheat and SNIs slow the nitrification process. Scenarios including BNI-wheat will inhibit nitrification by 30% by 2030 and 40% by 2050. It was assumed that N fertilizer application rates can potentially be reduced, as N losses through N2O emissions, leaching and runoff are expected to be lower. The results show that the impacts from BNI-wheat with 40% nitrification inhibition by 2050 are assessed to be positive: a 15.0% reduction in N fertilization, a 15.9% reduction in LC-GHG emissions, and a 16.7% improvement in NUE at the farm level. An increase in ammonia volatilization had little influence on the reduction in LC-GHG emissions. The GHG emissions associated with N fertilizer production and soil N2O emissions can be reduced between 7.3 and 9.5% across the wheat-harvested area worldwide by BNI-wheat with 30% and 40% nitrification inhibition, respectively. However, the present study recommends further technological developments (e.g. further developments in BNI-wheat and the development of more powerful SNIs) to reduce environmental impacts while improving wheat production to meet the increasing worldwide demand.

peer reviewed | Migratory bird species may serve as vectors of contaminants to Antarctica through the local deposition of guano, egg abandonment, or mortality. To further investigate this chemical input pathway, we examined the contaminant burdens and profiles of the migratory South polar skua (Catharacta maccormicki) and compared them to the endemic Adélie penguin (Pygoscelis adeliae). A range of persistent organic pollutants were targeted in muscle and guano to facilitate differentiation of likely exposure pathways. A total of 56 of 65 targeted analytes were detected in both species, but there were clear profile and magnitude differences between the species. The South polar skua and Adélie penguin muscle tissue burdens were dominated by p,p′-dichlorodiphenyldichloroethylene (mean 5600 ng g−1 lw and 330 ng g−1 lw respectively) and hexachlorobenzene (mean 2500 ng g−1 lw and 570 ng g−1 lw respectively), a chemical profile characteristic of the Antarctic and Southern Ocean region. Species profile differences, indicative of exposure at different latitudes, were observed for polychlorinated biphenyls (PCBs), with lower chlorinated congeners and deca-chlorinated PCB-209 detected in South polar Skua, but not in Adélie penguins. Notably, the more recently used perfluoroalkyl substances and the brominated flame retardants, hexabromocyclododecane and tetrabromobisphenol A, were detected in both species. This finding suggests local exposure, given the predicted slow and limited long-range environmental transport capacity of these compounds to the eastern Antarctic sector. © 2021

Knowledge of the ecology and at-sea distribution of migratory species like seabirds has substantially increased over the last two decades. Furthermore, an increasing number of studies have recently focused on chemical contamination of birds over their annual cycle. However, the understanding of the combined effects of spatial movements and contamination on seabirds’ life-history traits is still scarce. During winter, seabirds can use very different areas, at the large-scale. Such overwintering strategies and distribution may expose individuals to contrasting environmental stressors, including pollutants. Here, we studied the winter distribution and contamination with mercury (Hg), and their combined effects on reproduction, in a great skua (Stercorarius skua) population breeding in Bjørnøya, Svalbard. We confirmed that individuals of this specific population overwinter in three different areas of the North Atlantic, namely Africa, Europe and northwest Atlantic. The highest Hg concentrations in feathers were measured in great skuas wintering off Europe (Linear Mixed Models - mean value ± SD = 10.47 ± 3.59 μg g 1 dw), followed by skuas wintering in northwest Atlantic (8.42 ± 3.70) and off Africa (5.52 ± 1.83). Additionally, we found that female winter distribution and accumulated Hg affected the volume of their eggs (Linear Mixed Models), but not the number of laid and hatched eggs (Kruskal-Wallis tests). This study provides new insights on the contamination risks that seabirds might face according to their overwinter distribution and the possible associated carry-over effects. Mercury Reproduction Spatial ecotoxicology Biologging Carry-over effects | acceptedVersion

We present the occurrence of seafloor litter on the coast of Africa and in the Bay of Bengal based on records from the EAF-NANSEN Programme in 2011 to 2020. Litter bycatch records from 534 bottom trawls were standardized to km2 before analysis. Three percent of the records indicated areas of high littering and the highest densities occurred from 100 to 300 m in depth and 50 to 100 km from the coast. Littering was lower in the Indian Ocean compared to Atlantic Africa. Plastic objects and fishing gear dominated the recorded items (47 % and 22 % respectively) but, regional differences were pronounced. Plastic dominated North Atlantic and East African records (58 % and 80 % respectively) and fishing gear dominated (69 %) in South Atlantic Africa while records from the Bay of Bengal were a mix of categories. The relation between littering and population density, marine industry, major cities, and rivers is discussed. | publishedVersion

Monitoring plastic ingestion by marine wildlife is important for both characterizing the extent of plastic pollution in the environment and understanding its effect on species and ecosystems. Current methods to detect plastic in the digestive system of animals are slow and invasive, such that the number of animals that can be screened is limited. In this article, magnetic resonance imaging (MRI) is investigated as a possible technology to perform rapid, non-invasive detection of plastic ingestion. Standard MRI methods were able to directly measure one type of plastic in a fulmar stomach and another type was able to be indirectly detected. In addition to MRI, other standard nuclear magnetic resonance (NMR) measurements were made. Different types of plastic were tested, and distinctive NMR signal characteristics were found in common for each type, allowing them to be distin- guished from one another. The NMR results indicate specialized MRI sequences could be used to directly image several types of plastic. Although current commercial MRI technology is not suitable for field use, existing single- sided MRI research systems could be adapted for use outside the laboratory and become an important tool for future monitoring of wild animals. | publishedVersion

Microplastics (MPs) were characterized in surficial marine sediment (n = 36) and mussel (n = 29) samples collected along the British Columbia (BC) coast, Canada, using visual identification and Fourier Transform Infrared Spectrometry. MPs counts averaged 32.6 ± 5.3 particles per kg in sediment and 0.38 ± 0.04 particles per individual mussel (0.24 ± 0.04 /g of tissue). Victoria Harbour and the North Coast (Prince Rupert area) were MP hotspots, likely resulting from a combination of local sources and oceanographic conditions. Microfibers <1000 μm dominated the pattern in both matrices (61.1 % in sediment; 65.4 % mussels) highlighting the suspected role of textiles in the widespread distribution of MPs in the marine environment. Overall, polyester was dominant in sediment and mussels (54.1 % and 63.5 %, respectively), followed by polyethylene (16.2 % and 11.5 %, respectively). This is the first report of MPs in sediment and mussels along the coast of BC using standardized methods.