This research evaluates the carcinogenic and non-carcinogenic risks from cadmium, lead, and zinc in Bandar Abbas groundwater sources. The samples from 25 wells were analyzed for cadmium, lead and zinc. Total lifetime cancer risk and non-cancer risk assessment from exposure to these pollutants in drinking water (ingestion, inhalation and skin routes) were conducted for people living in these villages. In these regions most of the drinking water supplied, are from these wells which shows the importance of analyzing the quality of them in order to prevent diseases and cancer risks. The highest risk from cadmium seems to be in village Dehno Paein and also this amount for lead occurs in Tifakan Tal-e Gerdu. The highest hazard index (HI) based on human health risk assessment (HHRA) model for cadmium, lead, and zinc through oral, inhalation and dermal pathways were computed as 0.005, 1.63 and 0.043 which are in Dehno Paein, Tifakan Tal-e Gerdu and Faryab. Results show that lead can lead to more cancer cases in these villages that cadmium. The total expected cancer cases from exposure to cadmium in different routes are lower than lead.

This paper is the first to report on the role of a wastewater treatment plant (WWTP) in Sari, as a source of microplastics (MPs) in the Caspian Sea. Composite 270-liter/24-hour samples were taken the treated effluent of the WWTP in winter and spring, two seasons with different levels of human activity. The effluent contained 380±52.5 and 423±44.9 MPs/m3 in winter and spring, respectively, with the total numbers of MPs/m3 not differing between the two seasons. The dominant type of MPs in the effluent was microfibers with 237±68.7 and 328±33.4 per m3 in winter and spring, respectively. In both seasons, fiber sizes of

Microbial fuel cell (MFC) is a well-known technology that can convert contaminated substrate in the wastewater to electrical power. To gain more power output, the multi-electrode MFC was developed owing to it has a high surface area for anaerobic microbe adhesion. Here we show the multi-anode was made from the bamboo charcoal was combined with laccase-based cathode in the ceramic separator MFC for the rubber wastewater treatment and enhancing the power generation. The untreated rubber wastewater with initial COD and contaminated sulfate concentration of 3,500 mg/L and 1,100 mg/L was used as a anolyte. The 843.33±5.77 mA/m3 of CD, the 711.23±9.76 mW/m3 of PD were generated. Moreover, this system reached 83.07±3.01% of sulfate removal when it was operated at 30 °C for 12 hr. This study recommended that multi-anode with laccase based MFC can more successfully produce energy from untreated rubber wastewater. it will be greater in terms of electricity generation and sulfate removal.

The pomegranate (Punica granatum) fruit peel exposed to mixture air pollutants were collected from two sites with different air quality around the industrial area of Gabes city, Tunisia. The first site presented the ‘Polluted site’, which is situated in the oasis close to the industrial area. While, the second site referred to the ‘Control site’ located at 37 km from the industrial area. Using HPLC ES-MS, 21 phenols were identified and quantified in methanol extract from pomegranate fruit peel. The results showed that various phytochemical substances, including phenols acids and flavonoids, were identified and quantified in the peel extract. The polyphenols content and the flavonoids contents in peel obtained from polluted site were higher than that collected from the control site. The concentrations of the identified polyphenols were ranged between 0.39 and 7803.68 mg/ kg DW. The stimulation of some free phenolic compounds such syringic acid, transfrulic acid, epicatechin, rutin and quercetin was enregistred only in peel collected from contaminated environment. The quali-qualitative changes between sites are probably related to the difference in the air quality. The increase of polyphenols could be implicated during adaptive mechanisms under air pollution. Phenolic composition changes in Punica granatum peel could be also suggested as useful approach air pollution monitoring.

This work explores the synthesis and characterization of two novel nanocomposites that can be used in various applications, such as aqueous solution adsorption of pollutants. The first nanocomposite consists of tin (Sn)-doped titanium dioxide (TiO2) on activated carbon, while the other one consists of polypyrole (PPy), chitosan (CS), and Sn-doped TiO2. A contrast was made of their effective adsorbent materials for the removal of Cibacron Brilliant Yellow dye from aqueous solutions. Different analytical techniques such as X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), energy dispersive X-ray analysis (EDX), and Fourier transform - infrared (FT-IR) were used to analysis the nanocomposite samples. SEM images show that the average particle diameter of PPy-CS/Sn-doped TiO2 NC is 75 ± 3 nm, while Sn-doped TiO2/AC particles have an average diameter of 40 ± 2 nm. The greater PPy-CS/Sn-doped TiO2 nanocoposite particle diameter indicates that the polymers cover the Sn-doped TiO2 nanoparticles, which leads to higher in the diameter of the particles. The adsorption efficiency of Sn-doped TiO2/AC was higher than that of PPy-CS/Sn-doped TiO2 sample due to its smaller particle size which resulted in a higher surface area which provides more adsorption sites. However, both samples showed remarkable adsorption capacity, where the adsorption capacity of Sn-doped TiO2/AC and PPy-CS/Sn-doped TiO2 were 104 and 103 mg/g, respectively.

I is missing this work, a computational simulation has been performed to investigate the positional effect of reburn fuel injection on NO-reburn. Reburn fuel methane is injected across the coal injection plane at different axial positions of the combustor. Various major NO source mechanisms are considered for NO formation and NO reburn mechanism is used for NO depletion. Temperature profile, species concentration are also investigated, as both NO formation and depletion rate depends on these parameters. It has been observed that, a high temperature flame exists near coal inlet, when the reburn fuel injection plane is closer to coal inlet. On the other hand, the temperature of the flame near the coal inlet decreases when the reburn fuel injection position is far away from coal inlet region.  Moreover, NO sources are observed near coal inlet region, when the reburn fuel is injected closer to coal inlet. On the other hand, only Fuel-NO is observed near coal inlet, when the reburn fuel is injected away from the coal inlet. Maximum NO reduction efficiency is observed at outlet plane when reburn fuel is injected closer to inlet, whereas a relatively lower NO reduction efficiency has been observed at outlet plane when reburn fuel is injected far away from coal inlet region.

In this study, the estimated amounts of discarded face masks due to COVID 19 were investigated. In this context, the amount of waste face masks was determined separately according to the mask types used (nonwoven, meltblown, and 3-ply, pleated) and the importance of waste face masks was revealed. According to obtained data, the estimated total daily face mask use in Turkey is 72,351,638. The highest amounts of nonwoven, meltblown, and 3-ply face mask waste were determined as 26.88, 36.29, and 43.68 tonnes/day for İstanbul city, respectively. Total amounts of nonwoven, meltblown and 3-ply face mask waste in Turkey were calculated as 144.7, 195.35, and 235.14 tonnes/day, respectively. The top 5 provinces with the highest amount of waste masks are listed as follows; İstanbul (nonwoven=26.88, meltblown=36.29, 3ply=43.68 tonnes/day), Ankara (nonwoven=9.91, meltblown=13.38, 3ply=16.11 tonnes/day), İzmir (nonwoven=7.76, meltblown=10.47, 3ply=12.61 tonnes/day), Bursa (nonwoven=5.40, meltblown=7.29, 3ply=8.78 tonnes/day), and Antalya (nonwoven=4.45, meltblown=6.01, 3ply=7.23 tonnes/day), respectively. In Turkey, 91.3% of medical waste collected in health institutions in 2019 (90,920 tonnes) was sterilized and disposed of in storage areas (83,010 tonnes). 8.7% of medical waste was sent to incineration facilities and disposed (7,910 tonnes). Considering these values, 132, 178.35, and 214.7 tonnes/day of nonwoven, meltblown, and 3-ply face mask wastes can be disposed by sterilization and the remaining 12.7, 17, and 20.44 tonnes/day by incineration, respectively.

Recently, making use of emerging fuels such as municipal waste has been proposed as an alternative for conventional fuels and also as a way for municipal waste disposal. This research, while modeling the thermal and electrical profiles of Ilam Industrial Town, examines the possibility of supplying the required fuel from municipal waste by the year 2041. For this purpose, different combined heat and power (CHP) scenarios were implemented in the LEAP software. According to the results, electricity generation will start gradually from the year of operation of the power plants in 2025 and reach more than 4.3 GWh in 2026. The production process will be incremental and is expected to reach 115.9, 119.1, 111.8, 118.4, 123.1, 118.9, 118.4, 118.4 GWh, respectively under the scenarios of gasifier CHP, CHP turbine incinerator, CHP steam incinerator, landfill CHP, syngas CHP, anaerobic digester CHP, combined gasifier and incinerator CHP, and ultimately improve to 118.9 GWh under the scenario of optimized gasifier and incinerator CHP. The required power plant capacity under the above-mentioned scenarios is expected to be approximately 21 MW by the year 2041and modify to 20.5 MW under the optimization scenario. The incinerator, combined-incinerator-and-gasifier, and optimization scenarios meet the supply and demand conditions of the generated waste, and in other scenarios, either the CHP supply share should be lower than 50% or the additional waste should be supplied from the nearby villages and towns.

Today, indoor air pollution is a major concern. So far, many quantitative and qualitative studies have been conducted on particulate matter pollution in closed environments, but not much research has been done to measure air pollution in subway station. In this study, we have investigated the concentrations of PM10, PM2.5 and TSP particles in 12 underground stations on the oldest and main Tehran metro line, in two seasons, autumn and spring. For sampling suspended particles, we have used a portable direct reading device for monitoring suspended-particles (HAZDUST EPMA5000). We also used Pair T- test to compare the particle concentrations in different modes of the ventilation system (on, off, and inlet air) and Three-way variance analyze. According to the results, the mean concentrations of PM2.5-PM10 - TSP values in line-1 on the station platforms are significantly higher in spring than in autumn, off state of the ventilation system than on state of the ventilation system (P <0.001). Also, the concentration of particles measured in the air of subway stations is higher in the off state of ventilation systems, compared to Inlet air to stations (P<0.001). There is a correlation between concentration of particles measured in different sampling season, condition of the ventilation mode (on, off, inlet air) (P<0.001). Improving the efficiency of ventilation systems (equipped with a suitable filter) and fan in stations is suggested as one of the factors to reduce the concentration of particles, especially in spring.

Exposure to airborne particulates is a major occupational hazard especially for outdoor workers who spending time outdoors at ground level getting exposed to traffic fumes and roadside dust. Aim of this study was to assess respiratory health symptoms and determine the change of lung functions of the roadside vendors and its association with traffic-related exposures and their working experience. A cross-sectional study was conducted in key market places of Kolkata – Gariahat (GH), Esplanade-Park Street (EP), Shyambazar-Hatibagan (SH) and Behala (BE). Particulate (PM10 and PM2.5) levels and meteorological parameters (wind speed, temperature and relative humidity) were monitored in the morning, afternoon and night over the period of October 2019 to February 2020. Lung function status (FEV1, FVC, FEV1/FVC ratio and PEF) was measured for 111 purposively selected participants. PM concentration was observed higher in the morning and night peak hours for all sites. At SH area the average occupational exposure level for PM10 and PM2.5 were observed as 1502.22 μg/m3h and 684.01 μg/m3h. Percentage predicted FEV1 (%FEV1) of street vendors was found decreasing with their work experience and the worst-case scenario was observed in the EP area, with the corresponding value being 70.75%, 49.15% and 47.3% for less than 10 years, 10 to 20 years and more than 20 years participation respectively. The higher particulate burden was observed to have declining lung function status of the street vendors. A strong policy framework should be adopted to improve outdoor working environment for outdoor workers.