The possibility of using phytoremediation with weed plant species in Thailand to remove chromium (Cr) from soil was investigated. Six plant species, Cynodon dactylon, Pluchea indica, Phyllanthus reticulatus, Echinochloa colonum, Vetiveria nemoralis, and Amaranthus viridis, were chosen for their abilities to accumulate total chromium (TCr) at tanning industry sites. These plant species were studied in pots at a nursery. Cynodon dactylon and Pluchea indica provided highest TCr accumulation capacities of 152.1 and 151.8 mg/kg of plant on a dry weight basis, respectively, at a pulse hexavalent Cr [Cr(VI)] input of 100 mg Cr(VI)/kg soil. Most of the Cr uptake occurred within 30 days after the input. The TCr accumulation by Pluchea indica was observed in roots, stems, and leaves at 27%, 38%, and 35% of the TCr mass uptake, respectively, whereas 51%, 49% and 0% of the TCr mass uptake accumulated in roots, stems, and leaves of Cynodon dactylon, respectively. The results on Cr accumulation and translocation in plant tissues suggest that Cr was removed mainly via phytoaccumulation and Pluchea indica is more suitable than Cynodon dactylon for the phytoremediation of Cr contaminated soil.

This study investigates the fate and behavior of lead (Pb), copper (Cu), antimony (Sb), and arsenic (As) in a shooting range soil. The soil samples were collected from the surface (0-15 cm) and the subsurface (15-40 cm and 40-55 cm) of a grassy and wood chip covered impact area behind a firing position. Optical microscopy images indicate significant amounts of corroded bullet fragments and organic wood chips in the surface soil. Analysis by X-ray powder diffraction (XRPD) and scanning electron microscopy electron dispersive X-ray spectroscopy (SEM-EDS) showed that metallic Pb was transformed into lead oxides (litharge PbO and massicot PbO) and lead carbonates (hydrocerussite Pb₃(CO₃)₂(OH)₂, cerussite PbCO₃, and plumbonacrite Pb₅(CO₃)₃O(OH)₂). Rietveld quantification indicated the surface soil contained 14.1% metallic Pb, 17.9% hydrocerussite, 5.2% plumbonacrite, 5.9% litharge, and 3.9% massicot on a dry weight basis, or a total of 39.7% Pb, far in excess of lead concentrations typically found in US shooting range soils. Metallic Cu (bullet jacket material) appeared stable as no secondary minerals were detected in the surface soil. As and Sb concentrations were on the order of 1,057 mg/kg and 845 mg/kg respectively. The elevated soil pH coupled with high organic carbon content is thought to have caused downward migration of metals, especially for Pb, since 4,153 mg Pb/kg was observed at a depth of 55 cm. More than 60% of Pb was concentrated in the coarse soil (> 0.425 mm) fraction, suggesting soil clean-up possible by physical soil washing may be viable. The concentrations of Pb, As, and Sb in the toxicity characteristic leaching procedure (TCLP) extracts were 8,869 mg/L, 6.72 mg/L, and 6.42 mg/L respectively, were above the USEPA non-hazardous regulatory limit (As and Pb) of 5 mg/L. The elevated Sb and As concentrations draw concern because there is historically limited information concerning these metals at firing ranges and several values exceeded local soil cleanup criteria. As the high Pb concentrations appeared to be linked to the presence of organic-rich berm cover materials, the use of wood chips as berm cover to prevent soil erosion requires reconsideration as a shooting range management practice.

A benthic in situ flume and a 1D biogeochemical sediment model to evaluate solute fluxes across the sediment-water interface have been developed. The flume was successfully used to determine oxygen and nutrient fluxes at various locations of the Neckar River in Germany. The experimental results were linked with vertical pore water concentration profiles and independently verified with the model. By combining experimental and model results we assessed the influence of dissolved oxygen concentrations in the water column and the availability of degradable organic matter on sediment oxygen demand. The results and the derived relations can be used to parameterize the sediment module of large scale water quality models, allowing one to assess the influence of sediment-water interactions on various aspects of river water quality. Moreover, the biogeochemical sediment model can help to improve the general understanding of the processes governing solute concentrations and fluxes in sediments and across their interfaces.

Nutrient spiralling measurements were conducted in Lyrebird Creek, a forested stream in the Dandenong Ranges, Victoria, Australia. Spiralling indices from several nutrient ([graphic removed] , [graphic removed]) enrichment experiments were correlated with seasonal variation in factors thought to control nutrient uptake, i.e., temperature, light and algal biomass. It was hypothesized that nutrient uptake would be higher in summer as increased temperatures would promote both biotic and abiotic processes and higher light levels in summer would stimulate photosynthesis. However, results did not support this hypothesis. Uptake length for [graphic removed] and [graphic removed] and uptake velocity were not correlated with chlorophyll-a, light or temperature (r ² < 0.30, P > 0.1) despite the seasonality of these biophysical factors (r ² > 0.42, P < 0.02). Lyrebird Creek might had no seasonal trend in nutrient uptake and/or nutrient spiraling measurements only appears suitable for contrasting streams with large differences in biophysical factors that supports biotic and abiotic nutrient processing. In addition, small errors in measuring a nutrient concentration can result in a large range in the estimated S w and increased difficulty in determining significant differences in nutrient spiralling indices.

Two lab-scale trickle-bed air biofilters were operated for investigating the difference in performance between a hydrophilic and a hydrophobic volatile organic compound (VOC). Methyl isobutyl ketone (MIBK) and styrene were selected as a model hydrophilic and hydrophobic VOCs, respectively. Effects of loading rates, biofilter re-acclimation, removal profile along biofilter depth, nitrogen consumption, and CO₂ production were compared under three operating conditions, namely, backwashing and two non-use periods (starvation and stagnant). Consistent over 99% removal efficiency up to loading rates of 3.26 kg COD/m³-day was obtained for the MIBK biofilter at 0.76 min empty bed retention time (EBRT) and 1.5 L/d nutrient flow. A similar performance for the styrene biofilter was obtained for loading rates up to 1.9kg COD/m³-day at 2.02 min EBRT and 2.4 L/d nutrient flow. The MIBK biofilter required only an initial acclimation period of 16 days while styrene biofilter required 46 days. Non-use periods can be used as another means of biomass control for both biofilters when the employed loading rate did not exceed 1.27 and 2.17 kg COD/m³-day for styrene and MIBK biofilters, respectively. The re-acclimation of both biofilter was delayed with increase of loading rate. MIBK biofilter re-acclimated in 90 min, while styrene biofilter re-acclimated in more than 600 min. Under similar loading rates, MIBK biofilter utilized less biofilter depth than styrene biofilter. Nitrogen consumption behaviors were apparently different between the two biofilters. Styrene biofilter had higher CO₂ production than MIBK biofilter and its CO₂ production was closely related to the theoretical complete chemical oxidation.

One of the methods to diminish the internal phosphorus (P) loading is inactivation of P by aluminum (Al). After addition of Al to lake water an Al(OH)₃ floc is formed, which settles to the bottom and initially form a lid on the sediment surface. The effects of Chironomus plumosus larvae on sediment nutrient fluxes and P binding-sites in the sediment after addition of Al were tested. C. plumosus larvae were added to sediment cores in which sediment-water fluxes of nutrients were measured four times. After one month, the sediment was sectioned with depth and P fractions were measured by sequential chemical extraction. The chironomids created burrows through the Al layer which caused a significantly increased efflux of P from the Al treated sediment, because the P had only limited contact to the added Al. The chironomids also affected the P fractions in the sediment by their bioturbating activity. Thus, they caused increased Al concentrations in the upper part of the Al treated sediment. This created an enhanced contact between Al and P in the upper 7 cm of the sediment and, as a result, an increased binding of P to Al and a lowered porewater P. The DIP efflux is therefore expected to be lowered after the initial phase. Al had no effects on the nitrogen fluxes, but the chironomids enhanced the [graphic removed] release, and decreased the [graphic removed] release or increased the [graphic removed] uptake by the sediments.

Lake Vänern is Sweden's largest freshwater reservoir. It has been significantly affected by mercury contamination during the latter half of the 20th century. The aim of this study was to analyse the spatial and vertical mercury distribution, whereas 46 sediment cores were sampled in 2001 and analysed for total mercury. Several of these cores were dated presenting sediment accumulation rates varying from 6-8 mm yr-¹ outside major rivers to ~2 mm yr-¹ in the deeper areas. This was made using ¹³⁷ Cs, which was verified by ²¹⁰ Pb dating. Cluster analysis was used to identify five areas with similar accumulation and mercury concentration regimes. In areas far from shore, surface concentrations ranged from 0.1 to 0.5 ppm Hg, while the deeper layers in contaminated areas held concentrations up to 11 ppm Hg. In total, ~50 tonnes of mercury accumulated in the lake's sediment between ~1940-2001; almost 80% (or 37 tonnes) originate from before the mid 70's when the recovery period began, and at least 30 tonnes can be attributed to the former point source - a chlor-alkali industry.

Litterfall can be an important flux of mercury (Hg) to soils in forested landscapes, yet typically the only available data to evaluate Hg deposition is from precipitation Hg monitoring. Litterfall was collected at 39 sampling sites in two small research watersheds, in 2003 and 2004, and analyzed for total Hg. Four vegetation classes were designated in this study as hardwoods, softwoods, mixed and scrub. The mean litter Hg concentration in softwoods (58.8 ± 3.3 ng Hg g-¹ was significantly greater than in mixed (41.7 ± 2.8 ng Hg g-¹ and scrub (40.6 ± 2.7 ng Hg g-¹, and significantly lower than in hardwoods (31.6 ± 2.6 ng Hg g-¹. In contrast, the mean weighted litter Hg flux was not significantly different among vegetation classes. The lack of a significant difference in litter Hg flux between hardwoods and softwoods was attributable to the large autumnal hardwood litter Hg flux being balanced by the higher softwood litter Hg concentrations, along with the higher chronic litterfall flux throughout the winter and spring in softwoods. The estimated annual deposition of Hg via litterfall in Hadlock Brook watershed (10.1 μg m-² and Cadillac Brook watershed (10.0 μg m-² was greater than precipitation Hg deposition and similar to or greater than the magnitude of Hg deposition via throughfall. These results demonstrate that litterfall Hg flux to forested landscapes can be at least as important as precipitation Hg inputs.

The effects of two different biological treatments on hydrocarbon degradation and on soil biological activities were determined during a 100-d incubation period. An evaluation of soil biological activities as a monitoring instrument for the decontamination process of diesel-oil contaminated soil was made using measurements of organic carbon content, soil microbial respiration, soil ATP and dehydrogenase, β-glucosidase, lipase enzyme activities. Five samples were used: S (control, uncontaminated soil), CS (contaminated soil), SCS (sterilized contaminated soil), CFS (contaminated soil plus N and P), CCS (contaminated soil plus compost). The relationships between soil parameters and the levels of total petroleum hydrocarbons (TPH) residues were investigated. Results showed that inorganic nutrients NP and compost stimulated hydrocarbon biodegradation but not all biological activities to a significant extent. The residual hydrocarbon trend was positively related with that of the organic C content, microbial respiration and with β-glucosydase activity, while both soil lipase and dehydrogenase activities were negatively related with the hydrocarbon trend. Lipase activity was found to be the most useful parameter for testing hydrocarbon degradation in soil.

The results of a field experiment that investigated the in situ association of total coliforms (TC) and E. coli (EC) with suspended inorganic particles in a drinking water reservoir are presented. The experimental program measured TC and EC at various locations and at multiple depths in a medium sized Australian reservoir subject to continuous inflow forcing. Particle concentrations and size distributions were measured using a LISST (Laser In Situ Scattering Transmissometer) profiler. Correlations between the particle measurements and the bacteria were calculated to provide in situ evidence for the association of TC and EC with suspended inorganic particles. Both TC and EC correlated most strongly with fine particles between 3.2 and 4.5 μm. Development of a simple Lagrangian model of the inflow for particles and microbes additionally provided insight into the relative roles of dilution, sedimentation, and inactivation for the bacteria. The model results and the correlations support the theory that high association with the small particles was due to their high number concentration and the effective surface area available for attachment. It was also evident that the majority of bacteria (> 80%) were physically associated with the suspended particles and allowed a quantitative estimate of the net sedimentation rate. Bacterial attachment and the concomitant increase in settling should be considered when modeling bacterial dynamics, during design of monitoring programs and when implementing pathogen risk management strategies.