Billions of disposable face masks are consumed daily due to the COVID-19 pandemic. The role of these masks as a source of nanoplastics (NPs) and microplastics (MPs) in the environment has not been studied in previous studies. We quantified and characterized face mask released particles and evaluated their potential for accumulation in humans and marine organisms. More than one billion of NPs and MPs were released from each surgical or N95 face mask. These irregularly-shaped particles sized from c. 5 nm to c. 600 μm. But most of them were nano scale sized <1 μm. The middle layers of the masks had released more particles than the outer and inner layers. That MPs were detected in the nasal mucus of mask wearers suggests they can be inhaled while wearing a mask. Mask released particles also adsorbed onto diatom surfaces and were ingested by marine organisms of different trophic levels. This data is useful for assessing the health and environmental risks of face masks.

Prenatal fine particulate matter (PM₂.₅) exposure has been associated with impaired offspring neurodevelopment; however, the association of PM₂.₅ exposure during preconception with offspring’s neurodevelopment and factors responsible for this association are still unclear. This study estimated the associations of PM₂.₅ exposure during preconception and the first trimester with offspring neurodevelopment and evaluated whether maternal thyroid hormones mediate these associations. We recruited 1329 mother-child pairs between 2013 and 2015 in Wuhan, China. PM₂.₅ exposure levels of each woman during the 3 months preconception and the first trimester were estimated using land-use regression models. Offspring neurodevelopment characterized by mental developmental index (MDI) and psychomotor developmental index (PDI) were measured at 24 months of age. Maternal serum levels of free thyroxine (FT3), free triiodothyronine (FT4), and thyroid-stimulating hormone (TSH) during early pregnancy were measured of a subset of the 1329 women (551 women). Generalized estimation equation and general linear regression models were used to estimate the associations between maternal PM₂.₅ exposure, thyroid hormones, and offspring neurodevelopment. After adjusting for potential confounders, we found that either among all participants or the subset, PM₂.₅ exposure during preconception and the first trimester was negatively associated with offspring PDI. Double increment in the first trimester PM₂.₅ exposure was significantly associated with 3.43 and 6.48 points decrease in offspring MDI. In the subset, each doubling of PM₂.₅ exposure during preconception and the first trimester was significantly associated with 7.93 and 8.02 points decrease in maternal FT4 level, respectively. Increased maternal FT4, in turn, was associated with increased PDI (β = 16.69, 95% CI: 5.39, 27.99). About 7.7% (95% CI: 2.0%–19.4%) and 8.6% (95% CI: 3.0%, 22.1%) of the effect of PM₂.₅ exposure during preconception on offspring PDI was mediated through maternal FT4 and the FT4/FT3 ratio, respectively.

Microplastic (MP) pollution poses a huge threat to agroecosystems, but the distribution characteristics of MPs in different types of farmland are still largely unknown. In this work, samples from six land-use types were collected from Chinese farmlands in five provinces. It was found that MP abundances were in the range of 2783–6366 items/kg in all samples. MP distribution results showed that over 80% of particles were less than 1 mm, and that MP sizes ranging between 0.02 and 0.2 mm represented the greatest proportion. The particle shape classified as fragment (with edges and angular) was the most frequent shape, with an abundance of approximately 54.05%. Polyethylene (PE) and polyamides (PA) were the most abundant polymers in cropped lands; 20.88% and 20.31%, respectively. Statistical analyses showed that lands used for plastic mulching (mulch film and greenhouse crops) had a significantly higher particle abundance, hence identifying plastic mulching as a major contributor to MP pollution in agricultural lands. Furthermore, paddy lands had a significantly higher MP abundance than wheat lands. Variation analyses of MP characteristics revealed that cereal crop farmlands (wheat, paddy land) were more likely to contain fibrous shapes and large MP particles (1–5 mm). Economically important tree lands (orchards, woodlands) were likely to contain fragment shapes and pony-size MPs (0.02–0.2 mm). Discrepancies among farmlands may depend on various reasons, such as mulching plastic application, irrigation, atmospheric fallout, etc. This study provides firsthand evidences about the characteristics of MP pollution in farmlands and explores some predominant MP sources in agroecosystems.

The availability of organic matters in vast quantities from the agricultural/industrial practices has long been a significant environmental challenge. These wastes have created global issues in increasing the levels of BOD or COD in water as well as in soil or air segments. Such wastes can be converted into bioenergy using a specific conversion platform in conjunction with the appropriate utilization of the methods such as anaerobic digestion, secondary waste treatment, or efficient hydrolytic breakdown as these can promote bioenergy production to mitigate the environmental issues. By the proper utilization of waste organics and by adopting innovative approaches, one can develop bioenergy processes to meet the energy needs of the society. Waste organic matters from plant origins or other agro-sources, biopolymers, or complex organic matters (cellulose, hemicelluloses, non-consumable starches or proteins) can be used as cheap raw carbon resources to produce biofuels or biogases to fulfill the ever increasing energy demands. Attempts have been made for bioenergy production by biosynthesizing, methanol, n-butanol, ethanol, algal biodiesel, and biohydrogen using different types of organic matters via biotechnological/chemical routes to meet the world’s energy need by producing least amount of toxic gases (reduction up to 20–70% in concentration) in order to promote sustainable green environmental growth. This review emphasizes on the nature of available wastes, different strategies for its breakdown or hydrolysis, efficient microbial systems. Some representative examples of biomasses source that are used for bioenergy production by providing critical information are discussed. Furthermore, bioenergy production from the plant-based organic matters and environmental issues are also discussed. Advanced biofuels from the organic matters are discussed with efficient microbial and chemical processes for the promotion of biofuel production from the utilization of plant biomasses.

Antibiotics are a typical group of pharmaceutical and personal care products (PPCPs) with emerging pollutant effects. The presence of residual antibiotics in the environment is a prominent issue owing to their potential hazards, toxic effects, and persistence. Several treatments have been carried out in aquatic environments in order to eliminate antibiotic residues. Among these, photodegradation is regarded as an environmentally-friendly and efficient option. Indirect photodegradation is the main pathway for the degradation of residual antibiotics in natural water, as opposed to direct photodegradation. Algae, working as photosensitizers, play an important role in the indirect photolysis of residual antibiotics in natural water bodies. They promote this reaction by secreting extracellular organic matters (EOMs) and inducing the generation of active species. In order to provide a thorough understanding of the effects of algae on residual antibiotic degradation in the environment, this paper comprehensively reviews the latest research regarding algae-induced antibiotic photodegradation. The summary of the different pathways and photosensitive mechanisms involved in this process show that EOMs are indispensable to antibiotic photodegradation. The influencing factors of algae-induced photodegradation are also discussed here: these include algae species, antibiotic types, and environmental variables such as light source, ferric ion presence, temperature, and ultrasound treatment. Based on the review of existing literature, this paper also considers several pathways for the future study of algae-induced antibiotic photodegradation.

Recently Xiamen (China) has encountered various challenges of municipal solid waste management (MSWM) such as lack of a complete garbage sorting and recycling system, the absence of waste segregation between organic and dry waste at source, and a shortage of complete and clear information about the MSW generated. This article critically analyzes the existing bottlenecks in its waste management system and discusses the way forward for the city to enhance its MSWM by drawing lessons from Hong Kong’s effectiveness in dealing with the same problems over the past decades. Solutions to the MSWM problem are not only limited to technological options, but also integrate environmental, legal, and institutional perspectives. The solutions include (1) enhancing source separation and improving recycling system; (2) improving the legislation system of the MSWM; (3) improvement of terminal disposal facilities in the city; (4) incorporating digitization into MSWM; and (5) establishing standards and definitions for recycled products and/or recyclable materials. We also evaluate and compare different aspects of MSWM in Xiamen and Hong Kong SAR (special administrative region) under the framework of ‘One Country, Two Systems’ concerning environmental policies, generation, composition, characteristics, treatment, and disposal of their MSW. The nexus of society, economics of the MSW, and the environment in the sustainability sphere are established by promoting local recycling industries and the standardization of recycled products and/or recyclable materials. The roles of digitization technologies in the 4ᵗʰ Industrial Revolution for waste reduction in the framework of circular economy (CE) are also elaborated. This technological solution may improve the city’s MSWM in terms of public participation in MSW separation through reduction, recycle, reuse, recovery, and repair (5Rs) schemes. To meet top-down policy goals such as a 35% recycling rate for the generated waste by 2030, incorporating digitization into the MSWM provides the city with technology-driven waste solutions.

Mejillones Bay is a coastal ecosystem situated in an oxygen-deficient upwelling area impacted by mining activities in the coastal desert region of northern Chile, where conspicuous microbial life develops in the sediments. Herein, heavy metal (loid)s (HMs) such as Cu, Pb, As, Zn, Al, Fe, Cd, Mo, Ni and V as well as benthic microbial communities were studied using spectrometry and iTag-16 S rRNA sequencing. Samples were taken from two contrasting sedimentary localities in the Bay named Punta Rieles (PR) and Punta Chacaya (PC) within 10–50 m water-depth gradient. PR sediments were organic matter rich (21.1% of TOM at 50 m) and overlaid with low-oxygen waters (<0.06 ml O2/L bottom layer) compared with PC. In general, HMs like Al, Ni, Cd, As and Pb tended to increase in concentration with depth in PR, while the opposite pattern was observed in PC. In addition, PR presented a higher number of unique families (72) compared to PC (35). Among the top ten microbial families, Desulfobulbaceae (4.6% vs. 3.2%), Flavobacteriaceae (2.8% vs. 2.3%) and Anaerolineaceae (3.3% vs. 2.3%) dominated in PR, meanwhile Actinomarinales_Unclassified (8.1% vs. 4.2%) and Sandaracinaceae (4.4% vs. 2.0%) were more abundant in PC. Multivariate analyses confirmed that water depth-related variation was a good proxy for oxygen conditions and metal concentrations, explaining the structure of benthic microbial assemblages. Cd, Ni, As and Pb showed uniformly positive associations with communities that represented the keystone taxa in the co-occurrence network, including Anaerolineaceae, Thiotrichaceae, Desulfobulbaceae, Desulfarculaceae and Bacteroidales_unclassified communities. Collectively, these findings provide new insights for establishing the ecological interconnections of benthic microorganisms in response to metal contamination in a coastal upwelling environment.

As a common natural phenomenon, corpse decomposition may lead to serious environmental pollution such as nitrogen pollution. However, less is known about antibiotic resistance genes (ARGs), an emerging contaminant, during corpse degradation. Here, ARGs and microbiome in three soil types (black, red and yellow soil) have been investigated between experimental and control groups based on next-generation sequencing and high-throughput quantitative PCR techniques. We found that the absolute abundance of total ARGs and mobile genetic elements (MGEs) in the experimental groups were respectively enriched 536.96 and 240.60 times in different soil types, and the number of ARGs in experimental groups was 7–25 more than that in control groups. For experimental groups, the distribution of ARGs was distinct in different soil types, but sulfonamide resistance genes were always enriched. Corpse decomposition was a primary determinant for ARGs profiles. Microbiome, NH₄⁺ concentrates and pH also significantly affected ARGs profiles. Nevertheless, soil types had few effects on ARGs. For soil microbiome, some genera were elevated in experimental groups such as the Ignatzschineria and Myroides. The alpha diversity is decreased in experimental groups and microbial community structures are different between treatments. Additionally, the Escherichia and Neisseria were potential pathogens elevated in experimental groups. Network analysis indicated that most of ARGs like sulfonamide and multidrug resistance genes presented strong positively correlations with NH₄⁺ concentrates and pH, and some genera like Ignatzschineria and Dysgonomonas were positively correlated with several ARGs such as aminoglycoside and sulfonamide resistance genes. Our study reveals a law of ARGs’ enrichment markedly during corpse decomposing in different soil types, and these ARGs contaminant maintaining in environment may pose a potential threat to environmental safety and human health.

Triclosan (TCS) is widely applied in personal care products (PCPs) as an antimicrobial preservative. Due to its toxicity and potential risk to human health, TCS has attracted mounting concerns in recent years. However, biomonitoring of TCS in large human populations remains limited in China. In this study, 1163 adults in South China were recruited and urinary TCS concentrations were determined. TCS was detected in 99.5% of urine samples, indicating broad exposure in the study population. Urinary concentrations of TCS ranged from below the limit of detection (LOD) to 270 μg/L, with a median value of 3.67 μg/L. Urinary TCS concentrations from individuals were all lower than the Biomonitoring Equivalents reference dose, suggesting relatively low health risk in the participants. TCS concentrations did not differ significantly between sexes or education levels (p > 0.05). Nevertheless, marital status and age were found to be positively influence TCS levels (p < 0.001). After adjustment for body mass index (BMI), age was determined to be positively associated with TCS concentrations (p < 0.05), particularly in the age group from 31 to 51 years old. This study provides a baseline of urinary TCS exposure in South China general adult populations.

Volatile brominated compounds are important trace gases for stratospheric ozone chemistry. In this study, the spatial variations of dibromomethane (CH₂Br₂), bromodichloromethane (CHBrCl₂), dibromochloromethane (CHBr₂Cl) and bromoform (CHBr₃) in the seawater and overlying atmosphere were measured in the Yellow Sea (YS) and the East China Sea (ECS) in winter. The air-sea fluxes of CH₂Br₂, CHBrCl₂, CHBr₂Cl and CHBr₃ ranged from −11.46 to 25.33, −4.68 to 7.91, −8.60 to 4.08 and −88.57 to 8.84 nmol m⁻²·d⁻¹, respectively. In order to understand the mechanism of halocarbons production, we measured bromoperoxidase (BrPO) activity (39.18–186.74 μU·L⁻¹) in the YS and ECS for the first time using an aminophenyl fluorescein (APF) method and performed in-situ incubation experiments in BrPO-treated seawater. The production rates of CH₂Br₂, CHBrCl₂, CHBr₂Cl and CHBr₃ ranged from 14.21 to 94.74, 0.00 to 19.74, 0.00 to 30.62 and 6.18–72.75 pmol L⁻¹·h⁻¹, respectively, in BrPO-treated seawater. There were significantly higher production rates in coastal waters compared with the open sea (P = 0.016) because of higher DOC levels near the coast. Moreover, the production rates of halocarbons increased with BrPO activity and H₂O₂ concentration. The results showed that enzyme-mediated reaction was an important source for the production of halocarbons in seawater. The present research is of great significance for understanding the production mechanisms of halocarbons in seawater and global oceanic halocarbons emissions.