The feasibility of using cell-free extracts of nitrifying sludge to treat synthetic wastewater containing 4-methylphenol and ammonium was examined. Nitrifying cells were broken by sonication and encapsulated into calcium alginate. Cell-free extracts (CFE) of nitrifying sludge oxidized 4-methylphenol threefold faster than whole-cells, but CFE were not able to oxidize ammonium. The CFE encapsulated into calcium alginate (CFEA) displayed partial nitrification and 4-methylphenol oxidation. Five hours was enough to oxidize 100 % of ammonium and 4-methylphenol, at volumetric rates of 20.80 mg N/L h and 42.86 mg C/L h, respectively. It is inferred that an interaction between the CFE and calcium alginate resulted in the protection of the enzymes.

The aim of this study is to develop a process that combines electrocoagulation and electroperoxidation (EC-EP) and to evaluate its performance in treating domestic wastewaters (DWW). Electrolysis was performed using a parallelepipedic electrolytic cell (0.5 L) containing one sacrificial anode (mild steel or aluminum) and one cathode (vitreous carbon). The effects of the treatment time, current density, and type of anode electrode on the process performance were examined. The experimental results revealed that a current density of 4.0 mA cm⁻² was beneficial for DWW treatment. There was a decrease in the chemical oxygen demand (COD), suspended solid (SS), turbidity, color, and total phosphorus (Pₜₒₜ) by 67 ± 9, 98 ± 2, 55 ± 10, 61 ± 9, and 97 ± 0 %, respectively, for a treatment time of 60 min in the electrolysis cell in the presence of mild steel (anode) and vitreous carbon (cathode) electrodes. The process was also determined to be effective for removing pathogens (99 ± 1 % removal), such as fecal coliform (the log-inactivation was higher than 2 units).

Pentachlorophenol (PCP) has been used worldwide as a wood treatment agent and biocide. Its toxicity and extensive use have placed it among the most hazardous environmental pollutants. The response of a PCP-contaminated agricultural soil to the addition of solid urban waste compost and two exogenous Ascomycota fungal strains Byssochlamys nivea and Scopulariopsis brumptii was evaluated. The experiments were conducted in soil microcosms incubated for 28 days at 25 °C and 60 % moisture content. The depletion of PCP and the changes in biochemical soil properties (i.e. microbial biomass, soil respiration, dehydrogenase and fluorescein diacetate hydrolysis activities) were detected. The addition of PCP severely depressed some of the tested biochemical properties such as microbial biomass, dehydrogenase and fluorescein diacetate hydrolysis activities. By contrast, compost limited the negative effect of PCP on the dehydrogenase activity and soil respiration. When compost and fungal strains were contemporary present, a synergistic effect was observed with a reduction of more than 95 % of the extractable PCP after 28 days of incubation. No differences in PCP depletion resulted when fungi or compost were individually used. Our results indicate that many processes (i.e. microbial degradation and sorption to organic matter) likely occurred when PCP was added to the soil. The compost and the fungal strains, B. nivea and S. brumptii, showed good capability to tolerate and degrade PCP so that they could be successfully used in synergistic effect to treat PCP polluted soils.

The soil remediation field is still in development in Brazil. Currently, it is not known how many contaminated sites exist across the country; however, due to the country’s large size and its extensive urbanization and industrialization, it can be postulated that the number of contaminated sites must be very high. To remediate these sites, new sustainable technologies should be identified and evaluated. A technology that was born in the 1990s in the USA, and has been fairly investigated, is the use of nanoparticles (NPs) to degrade contaminants in soils and groundwater. This study aims to present a bibliographic review of nanotechnology application to remediation of soils and groundwater, as well as assess the potential of conducting research in this field in Brazil. This paper first presents an overview of the number of contaminated areas identified in the USA and Europe. The basic concepts of nanomaterials followed by classification, synthesis, and characterization of nanomaterials are explained. The main types of contaminants for which the technique was already applied as well as the chemical reactions between them and NPs are presented. The issues related to delivery and migration of NPs in the porous media is discussed. Concerns regarding the toxicity of nanomaterials are discussed. The in situ applications of nanomaterials for contaminated site remediation are presented. It is concluded that the issues involving remediation of soils and groundwater are site specific and it is not possible to directly transfer knowledge gained from sedimentary soils of temperate climates for residual soils found in tropical and subtropical climate regions. The research on nanotechnology for site remediation in Brazil has just begun, and more efforts are required from the technical and academic professionals to develop nanotechnology as practical technology for the remediation of contaminated sites.

Thermal stability is one of the most important indexes determining the practical applications of selective catalytic reduction (SCR) catalysts. The influence of typical alkali element on the thermal stability of industrial V₂O₅-WO₃/TiO₂ catalyst is first reported in this work. The activity of the sample is measured, and physicochemical properties are characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Raman spectrum, field emission scanning electron microscope (FE-SEM), N₂ adsorption-desorption, temperature programmed desorption of NH₃ (NH₃-TPD), and in situ diffuse reflectance infrared Fourier transform spectroscopy (in situ DRIFTS). The sintering and anatase-to-rutile phase transformation at high temperature will cause deactivation of SCR catalyst, and low concentration of K can increase the thermal stability. Under the same thermal treatment, the activity (380 °C) of sample deposited by K is more than three times higher than that of the fresh sample without K. Aggregation of vanadia in conventional SCR catalyst favors the sintering and anatase-to-rutile phase transformation of catalysts. Incorporation of K can modify the structure of partial V-OH and form V-OK, which hinders the aggregation of vanadia species and further increases the thermal stability of catalysts.

A novel cerium-loaded cellulose nanocomposite bead (CCNB) is synthesized and tested for fluoride adsorption. The optimization of the process under the cooperative influence of different experimental variables was made employing response surface methodology (RSM). It is found from fractional factorial design (FFD) that among the different experimental variables, only adsorbent dose, temperature, and pH are significant. At the optimum condition (adsorbent dose 1 g L⁻¹, temperature 313 K, pH 3.0), a maximum fluoride adsorption of 94 % was observed for an initial fluoride concentration of 2.5 mg L⁻¹. A quadratic polynomial model equation based on central composite design (CCD) was built to predict the extent of adsorption. The result of the analysis of variance (ANOVA) shows high coefficients of determination (correlation coefficient; R² = 0.9772, adjusted R² = 0.9545, and adequate precision = 18.1045) and low probability value (Prob > F, 0.001) which signifies the validity of the model. The equilibrium adsorption data conformed to the Tempkin isotherm, having higher R²and lower SE value, among the Langmuir, Freundlich, and Tempkin equations at different temperatures. The adsorption data was found to fit well the second-order rate equation with film diffusion governing the overall rate. The activation energy value was calculated to be 16.74 kJ mol⁻¹. Fluoride can be eluted from fluoride-loaded CCNB using alkali. CCNB can be reused at least for five successive operations.

Macroscopic (germination and root growth) and microscopic (mitotic index, chromosome, and nuclear aberrations) analyses have been used to determine the toxicity of environmental pollutants. To better understand the molecular mechanisms of mutation and their effects, molecular markers offer a key perspective, as they measure the direct effects of DNA mutagenic agents. The aim of this study was to evaluate the toxic potential of the fungicides difenoconazole (DZ) and tebuconazole (TZ) on Allium cepa. A reduction was observed in the germination, root growth, and mitotic index at higher concentrations of DZ and TZ, compared to the negative control. In addition, high incidence of chromosome and nuclear aberrations was detected in treated roots. This demonstrates the genotoxic, cytotoxic, and phytotoxic effects of DZ and TZ on the root tips of A. cepa. Moreover, the molecular results indicate a change in the amplification profiles of the simple sequence repeats (SSR) and intersimple sequence repeats (ISSR) obtained from A. cepa after exposure to the tested compounds. Loss and gain of bands increased dose-dependently. Further, the grouping methods distinguished the higher concentrations from the negative control. The ISSR and SSR analyses proved to be efficient tools for evaluating DNA alterations caused by DZ and TZ. In association with macroscopic and microscopic analyses, they constitute an informative approach for environmental mutagen studies.

During the extraction of coal bed methane (CBM), entrapped in the deep layers of different coal beds, large amount of coal bed water (CBW) is also simultaneously released. The quality of this water is generally very poor which may often contaminate the adjoining soil environment adversely. In the present study, some major changes occurring in CBW-contaminated soils were assessed with relation to nearby non-affected soils. The CBW was found to be moderately saline and highly alkaline in nature with high sodium absorption ratio (SAR) values. Contamination with this water affected the soil environments substantially resulting in significantly increased pH and exchangeable sodium percentage (ESP) in the affected soils thus rendering the soils unsuitable for undertaking common agricultural practices. However, in spite of moderately high electrical conductivity values of this contaminating water, the resultant increments in salinity status of the soils were not observed to reach near the critical level. This behaviour was attributed to light texture of these soils which probably helped in leaching of a part of the soluble salts. Some microbial properties as well as availability of nitrogen and phosphorus were also found to decline in these CBW-affected soils. The study showed that utmost care needs to be exercised before release of CBW during extraction of CBM. In case of any contamination to nearby arable soils, suitable amendment practices for alkaline soils need to be adopted to mitigate the adverse effects of such water on soil environment.

Invasive plant species have the potential to damage crops, industries, environment and public health, hence scientists, academicians, leaders of industry and land managers are realizing that invasive species are serious environmental threats for the 21st century. Parthenium weed is an annual herb in the family Asteraceae which is native to northern Mexico and southern USA. It is spreading across the length and breadth of our country. It gets easily established in almost all the places such as wasteland, roadsides, forests, railway tracks, crop fields, etc. Its high germination ability throughout the year, an enormous seed bank, rapid spread, colonization and extreme adaptability in a wide range of habitats is responsible for its wide spread occurrence. Parthenium hysterophorus L. was reported to be one of the seven most dangerous weeds of the world. It has achieved a major weed status in India and Australia within a relatively short period due to its fast multiplication, rapid growth and its ability to compete with other native flora. There are many ways like mechanical, chemical, cultural and biological to control it, but it cannot be controlled by using a single approach. Integrated approach should be the better way to manage this noxious weed. The aim of this review is to provide general information about the physiology, distribution, ill effects and management of Parthenium.

The present long term study deals with the aerosol-cloud optical properties carried out during 2003-2012 over Kedarnath (30.73°N, 79.07°E) of the sub-Himalayan region of Uttarakhand, India with a resolution of 1°×1° grid in magnitude. The study was conducted using Moderate Resolution Imaging Spectroradiometer (MODIS) sensor onboard NASA’s Terra and Aqua satellites. Interannual and seasonal variations of Aerosol Optical Depth (AOD) are examined in the light of regional synoptic climatic meteorology. Aerosol optical depths have found to be increased >28 % across Kedarnath region of India during the study period of 2003- 2012. Annual mean Terra/Aqua AOD values at 550 nm displayed an increasing trend at a rate of ~0.0045/ 0.0089 per year respectively. Further, seasonal winter means Terra/Aqua AOD values exhibit an increasing trend at a rate of ~0.013/0.006 per year respectively. The results extracted in the present study are compared with the earlier studies as well as with the AOD values over various other Indian regions.