The soil saltiness in the Brazilian semiarid environment is a common problem caused by incorrect agricultural practices, allied to the local weather and soil condition. The use of phosphogypsum (PG) to recover these soils still is a concern since this material has in its composition natural radionuclides. An experiment was conducted to study the use of phosphogypsum to reduce the salinity and evaluate the bioavailability of radionuclides on the Brazilian semiarid region soils. The radionuclide content of phosphogypsum samples were previously analyzed by gamma spectrometry. Three differents doses of phosphogypsum were mixed with samples of surface soil in the greenhouse, and after a reaction time and irrigation, controlled soil samples + phosphogypsum underwent simple extractions based on the sequential extraction method by Tessier et al. Ra isotopes and ²¹⁰Pb in the extracted fractions were analyzed by counting alpha and beta. The higher concentration of Ra isotopes and ²¹⁰Pb were associated to residual fraction, followed by exchangeable fraction due to the low levels of carbonates, organic matter, and manganese and iron oxides. The use of phosphogypsum studied did not contribute to increase the ²²⁶Ra activity on the analyzed soils. ²²⁶Ra levels in phosphogypsum were lower than those recommended by the USEPA to allow the use of phosphogypsum in agricultural soils, but can contribute to the accumulation of ²²⁸Ra and ²¹⁰Pb. The phosphogypsum Imbituba promoted a satisfactory reduction of electrical conductivity in the soils, which indicates the possibility of recovery of these soils.

The quantities of residual mulch film in the soil will further increase with the wide application of agricultural plastic mulch film, and the pollution of residual mulch film, which is a continuous pollutant and the one that is difficult to degrade, is a major limiting factor for the sustainable development of agriculture in China. Residual mulch film in the soil inevitably affects soil hydrodynamic parameters, destroys the homogeneity of the soil texture, seriously impedes the movement of soil water and solutes, and thus greatly influences crop growth and fruit quality. To unravel the effects of residual mulch film on tomato growth and fruit quality, pot experiments in the greenhouse were carried out in 2015 and 2016 in Northwest China. Six levels of residual mulch film were applied: 0 kg ha⁻¹ (CK), 80 kg ha⁻¹ (T1), 160 kg ha⁻¹ (T2), 320 kg ha⁻¹ (T3), 640 kg ha⁻¹ (T4), and 1280 kg ha⁻¹ (T5). Plant height, stem diameter, dry biomass, yield, root length, root surface area, fruit shape index (FSI), soluble sugar content (SSC), organic acid (OA), vitamin C (VC), lycopene, and nitrate content (NC) were measured. Plant height, stem diameter, dry biomass, and yield of tomato had a downward trend as the residual mulch film amount increased. Root length and root surface area were significantly decreased with an increasing amount of residual mulch film, but root volume and root diameter showed an inconspicuous decrease. When the amount of residual mulch film was more than 80 kg ha⁻¹, growth indexes, dry biomass, and yield of tomato showed a sharp decline. FSI, OA, and lycopene decreased as the residual mulch film amount increased, whereas SSC, VC, and NC showed an increase trend. With the increase in residual mulch film amount, the F and membership function values (X μ) all showed a declining trend in comparison to the CK. Therefore, residual mulch film can aggravate the negative effects on the comprehensive fruit quality of tomato.

Despite recent regulations, atmospheric ammonia (NH₃) emissions have not changed much over the last decades and excessive nitrogen remains as one of the major drivers for biodiversity changes. To prevent deleterious effects on species and ecosystems, it is very important to establish safety thresholds, such as those defined by the Critical Level (CLE) concept, “the concentration above which direct adverse effects on receptors may occur, based on present knowledge.” Empirical critical levels of atmospheric NH₃ have mainly been reported for temperate forests and there is a lack of information for Mediterranean forests. Here, we provide a case study on NH₃ CLEs for a typical Mediterranean ecosystem, the holm-oak (Quercus ilex) forest. To derive the CLE value, we measured NH₃ concentrations for 1 year at a distance gradient in the forest surrounding a point source (cattle farm) and used diversity changes of lichen functional groups to indicate the onset of adverse effects. We estimate a NH₃ CLE threshold of 2.6 μg m⁻³, a value that is higher than that reported in other Mediterranean ecosystems and suggests that the site has been already impacted by NH₃ pollution in the past. In a more general context, this study confirms the validity of lichen functional groups to derive CLEs in Mediterranean forests and woodlands and contribute to the body of knowledge regarding the impacts of NH₃ on ecosystems.

The main objective of the present paper is to evaluate the use of Moringa oleifera (MO) as a natural coagulant in coagulation/flocculation/sedimentation (CFS) followed by the microfiltration (MF) or nanofiltration (NF) process in dairy wastewater treatment, focusing on determining the best association of treatments that can generate wastewater for reuse purposes. The association of CFS-MF-NF treatments showed a high removal efficiency for chemical oxygen demand (COD) (mean of 96%), turbidity, and color (mean of 99%) meeting water reuse standards, allowing the reutilization of the wastewater, in relation to the analyzed parameters. The results indicate a lower membrane fouling rate (63%), an increase in permeate flow, and better quality of the permeate, proving that the CFS-MF-NF treatment is the most suitable among all the tested treatments. Finally, the treated wastewater obtained with this process presents better quality than the wastewater obtained with the conventional treatments.

Plants of the urban environment are exposed to a wide range of pollutants, including heavy metals. This research studies in situ the eco-physiological and antioxidant responses of holm oak (Q. ilex) leaves to Pb and Cd to assess the mechanisms of metal tolerance in this species, widely used as biomonitor. Leaves of plants grown at parks and roadsides were analyzed for photosynthetic activity, Pb and Cd concentration in tissues and cell-free extracts, thiol groups, D1 and Rubisco protein content, ascorbic acid (AsA) amount, and catalase (CAT) activity. The main results evidenced that Cd concentration was higher in leaves collected at the park out from the downtown; whereas Pb was most abundant in leaves sampled at the roadside nearby the highway. Pb in cell-free extracts was higher in park than in roadside leaves. Although Cd in the leaf tissues was twofold lower than Pb, it was more abundant than Pb in cellular extracts deprived of all particulate matter. Leaves responded to different concentration of Cd and Pb modulating some eco-physiological and biochemical traits, roadside leaves showed reduced leaf lamina, higher content of photosynthetic pigments, hydrogen peroxide, and AsA, as well as higher CAT activity compared to park leaves. In the roadside leaves, a stress condition for photosynthetic apparatus can be hypothesized on the basis of the decline of photochemical activity, the increase of NPQ, and the reduction of Rubisco and D1 protein content. The elevated presence of thiol groups in these leaves suggests a possible role of Pb and Cd in activation of antioxidant responses.

In this study, the potential of selected psychrotolerant yeast strains for phenol biodegradation was studied. From 39 strains isolated from soil and water samples from Rucianka peat bog, three psychrotolerant yeast strains, A01₁, B02₁, and L01₂, showed the ability to degrade phenol. The result shows that all three yeast strains could degrade phenol at 500 and 750 mg l⁻¹ concentration, whereas strains A01₁ and L01₂ could degrade phenol at 1000 mg l⁻¹ concentration. The time needed for degradation of each phenol concentration was no longer than 2 days. Strains A01₁, B02₁, and L01₂ were identified based on 26S rDNA and ITS sequence analysis as belonging to species Candida subhashii, Candida oregonensis, and Schizoblastosporion starkeyi-henricii, respectively.

A comparative study between conventional methods (EPA 3050B and ISO 11466.3) of metal extraction and a simple low-cost method, using aqua regia, was carried out in this work. Six elements (Mn, Cu, Zn, Pb, Ni, and Cd) were determined by flame atomic absorption spectrometry (FAAS) in a certified sample of sediment (CNS 392). Central composite design (CCD) and response surface methodology (RSM), as well as machine learning, were used to find the optimal conditions for metal extraction. The influence of the parameters—volume of nitric acid in aqua regia (v), time of extraction (t), and temperature (T)—on Mn, Cu, Zn, and Pb recoveries was investigated. The best condition for the recovery of all the metals was v = 2.5 mL of HNO₃, t = 2 h, and T = 90 °C. In comparison with the conventional methods, the aqua regia method was found to present better recovery values and lower standard deviations for all the metals studied.

In developing countries, it is uncommon to find watersheds that have been the object of detailed environmental studies. It makes the assessment of the magnitude of environmental impacts and pollution of these sites difficult. This research demonstrated ways to understand the dynamics of river bottom sediments contamination, even for watersheds with a lack of environmental data. Based on geochemical affinity, we conducted a comprehensive study on the concentration of metals and metalloids. Then, we discussed the probable origin of the concentration of these elements at the bottom sediment along the Matipó River. The Matipó River is an important tributary of the Doce River, which stood out in international headlines because of the mining tailing dam disaster in Mariana, Minas Gerais, in 2015. The bottom sediment samples were taken in 25 stations located along the basin in different seasonal periods. The results showed that copper ([Formula: see text] = 464.7 mg kg⁻¹) and zinc ([Formula: see text] = 287.7 mg kg⁻¹) probably have natural origin, despite of the high concentrations. Lead ([Formula: see text] = 28.0 mg kg⁻¹), chromium ([Formula: see text] = 153.2 mg kg⁻¹), and nickel ([Formula: see text] = 41.8 mg kg⁻¹) also had high concentrations at some collecting stations, and this probably reflected the local natural conditions. The bedrock of the studying basin is dominantly composed of metabasalts and metatonalites interlayered with calcitic and dolomitic metalimestone. On the other hand, the concentration was worrisome in stations near human activities, possibly due to impacts caused by unsustainably agriculture and livestock.

The article provides information about a new device, AlgaTox developed in the R&D project sponsored by the Technology Agency (n.TA02030179) and patented in Czech Republic (CZ 305687). Its functionality is based on the use of biosensor, and its main advantage is fast response rate. The toxicity detection is achieved through precise measurement of green algae oxygen production dynamics after their exposure to light of wavelength of 680 nm. Clark sensor with a resolution of 0.05% of the equilibrium oxygen concentrations and stability at a constant pressure and temperature of 0.1% of the equilibrium oxygen concentration at the 24-h measurement is used for the oxygen detection. Laboratory testing of the device has been made using silver nitrate, substance with known inhibitory effect on algae. Real samples of aqueous soil extracts and waste sample from old dried-up industrial tailing pond enriched with insecticide have been also tested. The values of oxygen production inhibition or stimulation determined with the new device in the evaluation of real samples were up to six times higher in comparison with the corresponding values of inhibition (stimulation) of growth rates determined by standard procedure.

The objectives of this study were to determine and compare the concentrations of Hg, Cd, Pb, Zn, Cu, Ni and Se in the liver of macrourid fish as Trachyrinchus scabrus, Nezumia sclerorhynchus and Coelorhynchus coelorhynchus from the Mediterranean Sea, Italy. It was also carried out to evaluate the relationship between metal concentration and fish size and to explore selenium/mercury molar ratio. The highest concentrations were in T. scabrus, followed by N. sclerorhynchus and C. coelorhynchus. In all species, any element displayed significant correlation between metal body burden and fish size, except Hg. The mean selenium/mercury ratios were greater than one in all fish species indicating that Se antidotal effect in counteracting Hg occurred. This report represents one of the few surveys providing information on trace metal in deep-sea fish from Mediterranean Sea constituting, thus, an essential baseline work with which future levels may be compared.