This critical review presents several aspects related to the use of copper as a main component in brake pads in road vehicles. The compositions of these materials are attracting increasing interest and concern due to the relative contribution of wear products to particulate matter emissions in the environment as a result of braking action even though there has been a reduction in exhaust products from internal combustion engines. We review the data on the main wear mechanisms in brake systems and highlight the positive role of copper. However, similar to other heavy metal emissions, even the release of copper into the atmosphere may have important environmental and health effects. Thus, several replacement strategies are being pursued, and the positive and negative features will be critically reviewed. Additionally, the future perspectives in materials development will be discussed.

Washing and wet mopping is often advocated as a remedial treatment to limit exposure to lead dust. Here, surface and pre- and post-play wipes were measured to ascertain dust metal exposures (arsenic, cadmium, copper, lead and zinc) following play routines at four playgrounds in the smelter city of Port Pirie, South Australia, which are washed regularly. Although post-play hand wipe metals were 55.9% (95% CI: −0.78, −0.34) lower on wash days, loadings increased ∼5.1% (95% CI: 1.2, 11.7) per hour after washing. Despite washing, post-play hand lead exceeded a conservative value of 800 μg/m2 within 24 h or sooner, with loadings increasing in proximity to the smelter. Post-play lead loadings were always >1000 μg/m2 at the playground closest to smelter. Playground washing results in short-lived exposure reduction and effective treatment requires elimination of smelter emissions.

The association between residential traffic exposure and change in C-reactive protein over 2-years was evaluated using multivariate linear regression including interaction models for traffic and diabetes medication use/type (insulin vs. oral hypoglycemic agents (OHAs)).The study population was Puerto Rican adults (n = 356) residing in greater Boston with type 2 diabetes. Traffic was characterized as proximity to roads with >20,000 weekday traffic volumes, and multi-directional traffic density.Increases in CRP concentration were significantly associated with residence ≤100 m of a roadway (p = 0.009) or near multiple roadways (p < 0.001), vs. further away, for individuals using insulin in stratified models, with consistent results in interaction models (p = 0.071 and p = 0.002). CRP was significantly lower with highest traffic density exposure in stratified (p = 0.03) and interaction models (p = 0.024) for individuals using OHAs.Individuals on insulin experienced increased CRP concentrations with traffic exposure over a 2-year study period, while those using OHAs did not experience increases.

In this study, we used publicly available GIS layers and statistical tree-based modeling (CART and Random Forest) to predict pathogen indicator counts at a regional scale using 88 spatially explicit landscape predictors and 6657 samples from non-estuarine streams in the Oregon Coast Range. A total of 532 frequently sampled sites were parsed down to 93 pathogen sampling sites to control for spatial and temporal biases. This model's 56.5% explanation of variance, was comparable to other regional models, while still including a large number of variables. Analysis showed the most important predictors on bacteria counts to be: forest and natural riparian zones, cattle related activities, and urban land uses. This research confirmed linkages to anthropogenic activities, with the research prediction mapping showing increased bacteria counts in agricultural and urban land use areas and lower counts with more natural riparian conditions.

Lead (Pb) poisoning has caused significant mortality in waterfowl populations worldwide. In spite of having been banned since 2003, prevalence of Pb shot ingestion in mallards (Anas platyrhynchos) from the Ebro delta was still 15.5% in 2011–12. We collected mallard eggs from this area to study the effects of maternally transferred Pb on eggshell properties and on immune response and oxidative balance of ducklings. Eggshell Pb levels were positively correlated with Pb levels in the blood of ducklings. Ducklings with blood Pb levels above 180 ng mL−1 showed reduced body mass and died during the first week post hatching. Blood Pb levels positively correlated with humoral immune response, endogenous antioxidants and oxidative stress biomarkers, and negatively correlated with cellular immune response. Pb shot ingestion in birds can result in maternal transfer to the offspring that can affect their developing immune system and reduce their survival in early life stages.

A characterization of the physical–chemical composition of the atmospheric PM adsorbed to airborne pollen was performed. Airborne pollen was sampled using a Hirst-type volumetric spore sampler and observed using a Field Emission Electron Probe Microanalyser for PM analysis. A secondary electron image was taken of each pollen grain and EDS spectra were obtained for individually adsorbed particles. All images were analysed and the size parameters of the particles adsorbed to pollen was determined. The measured particles’ equivalent diameter varied between 0.1 and 25.8 μm, mostly in the fine fraction. The dominant particulates identified were Si-rich, Organic-rich, SO-rich, Metals & Oxides and Cl-rich. Significant daily differences were observed in the physical–chemical characteristics of particles adsorbed to the airborne pollen wall. These differences were correlated with weather parameters and atmospheric PM concentration. Airborne pollen has the ability to adsorb fine particles that may enhance its allergenicity.

In this study, the effectiveness of bioremediating 1,2-dichloroethane (DCA)-contaminated groundwater under different oxidation–reduction processes was evaluated. Microcosms were constructed using indigenous bacteria and activated sludge as the inocula and cane molasses and a slow polycolloid-releasing substrate (SPRS) as the primary substrates. Complete DCA removal was obtained within 30 days under aerobic and reductive dechlorinating conditions. In anaerobic microcosms with sludge and substrate addition, chloroethane, vinyl chloride, and ethene were produced. The microbial communities and DCA-degrading bacteria in microcosms were characterized by 16S rRNA-based denatured-gradient-gel electrophoresis profiling and nucleotide sequence analyses. Real-time polymerase chain reaction was applied to evaluate the variations in Dehalococcoides spp. and Desulfitobacterium spp. Increase in Desulfitobacterium spp. indicates that the growth of Desulfitobacterium might be induced by DCA. Results indicate that DCA could be used as the primary substrate under aerobic conditions. The increased ethene concentrations imply that dihaloelimination was the dominate mechanism for DCA biodegradation.

Interactions between particulate matter with aerodynamic diameter less than or equal to 2.5 μm (PM2.5) and temperature on mortality have not been well studied, and results are difficult to synthesize. We aimed to assess modification of temperature on the association between PM2.5 and cause-specific mortality by stratifying temperature into low, medium, and high stratum in Hong Kong, using data from 1999 to 2011. The mortality effects of PM2.5 were stronger in low temperature stratum than those in high. The excess risk (%) per 10 μg/m3 increase in PM2.5 at lag 0–1 in low temperature stratum were 0.94% (95% confidence interval: 0.65, 1.24) for all natural, 0.88% (0.38, 1.37) for cardiovascular, and 1.15% (0.51, 1.79) for respiratory mortality. We found statistically significant interaction of PM2.5 and temperature between low and high temperature stratum for all natural mortality. Our results suggested that temperature might modify mortality effects of PM2.5 in Hong Kong.

In this work, agricultural and background soil concentrations of p,p′-DDT, p,p′-DDE, HCB, α-, β- and γ-HCH from 1993 to 2012 were collected from 73 peer-reviewed publications, and analysed statistically. For the period 2003–2012 and for all chemicals, the mean concentration in agricultural soil is significantly higher than the concentration in background soil. In addition to the statistical analysis, concentrations of p,p′-DDT and α-HCH in soils were calculated with a global environmental fate and transport model. A decrease in the mean soil concentration from the first decade to the second was observed with the model, but this decrease is not visible in the measured concentrations, which could result from ongoing use of p,p′-DDT and α-HCH Furthermore, modelled background soil concentrations are generally lower than measurements. This implies that background soil may have received p,p′-DDT and α-HCH through additional routes not described by the model such as spray drift.

Daily, size-segregated particulate matter (PM) samples were collected at Peking University from March 2012 to April 2013. Seventeen indoor air samples were also collected over this period. Winter PM concentrations decreased compared with those reported a decade ago, but summer PM concentrations increased over the same time period. Increasing summer PM concentrations likely resulted from a shift in the major source of PM from primary coal burning to vehicle-associated secondary particle formation. A multiple regression model explained 62% of daily PM concentration variations, and wind direction was the most important factor controlling PM concentrations. Severe pollution was often associated with southeasterly winds, while westerly and northwesterly winds brought relatively clean air. Temperature, precipitation and relative humidity also affected PM concentrations. PM concentrations indoors were generally lower than, but significantly correlated with ambient concentrations. Indoor PM concentrations were also affected by wind speed and temperature.