The infrastructures of coal-fired power plants in China have changed significantly since 2010, but the magnitude and characteristics of polycyclic aromatic hydrocarbon (PAH) emissions remain to be updated. In the present study, a unit-based PAH emission inventory for coal-fired power plants between 2010 and 2017 was constructed for Anhui Province, China. Atmospheric PAH emissions from pulverized coal (PC) and circulating fluidized bed (CFB) units in 2017 were 8600 kg and 7800 kg, respectively. The emission rates and intensities for CFB units (7.2 kg ton⁻¹ and 2.1 kg MW⁻¹) were significantly higher than those for PC units (1.1 kg ton⁻¹ and 0.19 kg MW⁻¹), primarily because CFB boilers were operated at lower combustion temperatures and poor combustion conditions compared to PC boilers. The distribution patterns of PAH emissions across different age groups largely reflected the time periods for constructing coal-fired units in Anhui and for the transition of small units to large ones. The accomplishment of ultralow emission technologies and phase-out of outdated coal-fired units were responsible for the decreasing trend of PAH emissions between 2012 and 2017. The warmer summer in 2013 and 2017 and colder winter in 2011 compared to other years probably caused increased use of air conditioners, resulting in increased electricity consumption and PAH emissions. Future PAH emissions would decrease by 45–57% during 2017–2030, benefitting from power plant fleet optimization, i.e., phasing out outdated coal-fired units and replacing them with large ones. With the best available optimized power plant fleets and end-of-pipe control measures accomplished in Anhui’s CFPPs, PAH emissions in 2030 would potentially be reduced by 56–65%.

Discarded micro/nano-plastic inputs into the environment are emerging global concerns. Yet the quantification of micro/nanoplastics in complex environmental matrices is still a major challenge, notably for soluble ones. We herein develop in-laboratory built nanostructures (zinc oxide, titanium oxide and cobalt) coupled to mass spectrometry techniques, for picogram quantification of micro/nanoplastics in water and snow matrices, without sample pre-treatment. In parallel, an ultra-trace quantification method for micro/nanoplastics based on nanostructured laser desorption/ionization time-of-flight mass spectrometry (NALDI-TOF-MS) is developed. The detection limit is ∼5 pg for ambient snow. Soluble polyethylene glycol and insoluble polyethylene fragments were observed and quantified in fresh falling snow in Montreal, Canada. Complementary physicochemical studies of the snow matrices and reference plastics using laser-based particle sizers, inductively coupled plasma tandem mass spectrometry, and high-resolution scanning/transmission electron microscopy, produced consistent results with NALDI, and further provided information on morphology and composition of the micro/nano-plastic particles. This work is promising as it demonstrates that a wide range of recyclable nanostructures, in-laboratory built or commercial, can provide ultra-trace capability for quantification for both soluble polymers and insoluble plastics in air, water and soil. It may thereby produce key missing information to determine the fate of micro/nanoplastics in the environment, and their impacts on human health.

For clearing pollutants and emerging contaminants like ciprofloxacin-500mg from wastewaters generated from pharmaceutical industries, soapnut seeds biochar was synthesized and used as an adsorbent for the effective removal process. Tubular furnace operated under nitrogen gas environment was used to synthesize biochar. The batch analysis were carried out successfully to study the removal mechanism and the removal efficiency of the chosen pollutant. The soapnut seeds biochar showed excellent adsorption of ciprofloxacin at pH 6 and temperature 303 K when the dosage was 0.07 g. The Langmuir removal capacity of 33.44 mg/g was received and the Freundlich model provided the best-fits. The ciprofloxacin-500mg adsorption process correlated well with the pseudo-second-order kinetics equation, and the intraparticle diffusion mechanism mainly controlled the process. The characterization of biochar concluded that O–H groups, CO groups, COO⁻groups and C–F groups, and π-π interactions, pore-filling effect, and cation exchange interactions played a role in the adsorption process. Therefore, the findings of the present work revealed that soapnut seeds biochar would be an excellent low-cost adsorbent for the removal of ciprofloxacin-500mg from wastewater.

Microplastics represent an emerging environmental issue and have been found almost everywhere including seafood, raising a great concern about the ecological and human health risks they pose. This study addressed the common technical challenges in the assessment of microplastics in seafood by developing an improved protocol based on Raman spectroscopy and using the green-lipped mussel Perna viridis and the Japanese jack mackerel Trachurus japonicus as the test models. Our findings identified a type of stainless-steel filter membranes with minimal Raman interference, and a combination of chemicals that achieved 99–100% digestion efficiency for both organic and inorganic biomass. This combined chemical treatment reached 90–100% recovery rates for seven types of microplastics, on which the surface modification was considered negligible and did not affect the accuracy of polymer identification based on Raman spectra, which showed 94–99% similarity to corresponding untreated microplastics. The developed extraction method for microplastics was further combined with an automated Raman mapping approach, from which our results confirmed the presence of microplastics in P. viridis and T. japonicus collected from Hong Kong waters. Identified microplastics included polypropylene, polyethylene, polystyrene and poly(ethylene terephthalate), mainly in the form of fragments and fibres. Our protocol is applicable to other biological samples, and provides an improved alternative to streamline the workflow of microplastic analysis for routine monitoring purposes.

Shipping makes up the major proportion of global transportation and results in an increasing emission of air pollutants. It accounts for 3.1%, 13%, and 15% of the annual global emissions of CO₂, SOₓ, and NOₓ, respectively. Hence, effective regulatory measures in line with the International Maritime Organization requirements regarding the fuel sulfur content (FSC) used in emission control areas are essential. An imaging detection approach is proposed to estimate SO₂, CO₂, and NO concentrations of exhaust gas and then calculate FSC based on the estimated gas concentrations. A multi-task deep neural network was used to extract the features from the ultraviolet and thermal infrared images of the exhaust plume. The network was trained to predict various gas concentrations. The results show high prediction accuracy for the remote monitoring of ship emissions.

Severe surface ozone pollution has become widespread in China. To protect public health, Chinese scientific communities and government agencies have striven to mitigate ozone pollution. However, makers of pollution mitigation policies rarely consider epidemiological research, and communication between epidemiological researchers and the government is poor. Therefore, this article reviews the current mitigation policies and the National Ambient Air Quality Standard (NAAQS) for ozone from an epidemiological perspective and proposes recommendations for researchers and policy makers on the basis of epidemiological evidence. We review current nationwide ozone control measures for mitigating ozone pollution from four dimensions: the integration of ozone and particulate matter control, ozone precursors control, ozone control in different seasons, and regional cooperation on the prevention of ozone pollution. In addition, we present environmental and epidemiological evidence and propose recommendations and discuss relevant ozone metrics and the criteria values of the NAAQS. We finally conclude that the disease burden attributable to ozone exposure in China may be underestimated and that the epidemiological research regarding the health effects of integrating ozone and particulate matter control is insufficient. Furthermore, atmospheric volatile organic compounds are severely detrimental to health, and related control policies are urgently required in China. We recommend a greater focus on winter ozone pollution and conclude that the health benefits of regional cooperation on ozone control and prevention are salient. We argue that daily average ozone concentration may be a more biologically relevant ozone metric than those currently used by the NAAQS, and accumulating epidemiological evidence supports revision of the standards. This review provides new insight for ozone mitigation policies and related epidemiological studies in China.

Anthropogenic activities have increased lead (Pb) emissions and impacted their spatiotemporal distributions in coastal seas. To quantify the increasing variability of Pb and identify the specific origins and their corresponding magnitudes, Pb and Pb isotopes are investigated in a well-placed sediment core covering the period of 1928–2008 in the Central Yellow Sea Mud (CYSM). The concentration of Pb varied from 27.17 μg/g to 37.30 μg/g upwardly along the core, with pronounced anthropogenic disturbance since the late 1960s. The Pb input history of the CYSM experienced five stages according to industrialization levels and Pb contamination, with relative pristine stages from 1928 to 1969 and human activity-impacted stages from 1969 to 2008. The ²⁰⁶Pb/²⁰⁷Pb ratio demonstrated an overall decreasing profile while the ²⁰⁸Pb/²⁰⁶Pb ratio displayed the reverse trend upwardly along the core, possibly due to the atmospheric delivery of anthropogenic Pb emissions from northern China. Furthermore, ²⁰⁸Pb/²⁰⁶Pb vs. ²⁰⁶Pb/²⁰⁷Pb shows certain linearity between natural sediment sources and anthropogenic emissions of Pb (atmospheric deposition); thus, atmospheric inputs account for 34–43% of the Pb in the sediment since Pb enrichment using the two-endmember mixing model. Moreover, the steep decrease in ²⁰⁶Pb/²⁰⁷Pb and rapid increase in ²⁰⁸Pb/²⁰⁶Pb since the 1970s suggest the introduction of leaded gasoline and the increasing proportionate consumption of gasoline relative to total energy consumption. The continuously decreasing ²⁰⁶Pb/²⁰⁷Pb ratio and increasing ²⁰⁸Pb/²⁰⁶Pb ratio since 2000 are the combined results of coal consumption, nonferrous smelting, and residual Pb contamination from leaded gasoline, which is quite distinctive from cases in North America and Europe. The relatively high ²⁰⁶Pb/²⁰⁷Pb and low ²⁰⁸Pb/²⁰⁶Pb ratios before 1969 represent the natural Pb isotopic signatures. Hence, Pb input is significantly affected by regional energy consumption and restructuring, and the Pb isotopic ratios may be a potential proxy for the shift in energy consumption.

Fuel additive methylcyclopentadienyl manganese tricarbonyl (MMT) is counted as an organic manganese (Mn)-derived compound. The toxic effects of Mn (alone and complexed) on dopaminergic (DA) neurotransmission have been investigated in both cellular and animal models. However, the impact of environmentally relevant Mn exposure on DA neurodevelopment is rather poorly understood. In the present study, the MMT dose of 100 μM (about 5 mg Mn/L) caused up-regulation of DA-related genes in association with cell body swelling and increase in the number of DA neurons of the ventral diencephalon subpopulation DC2. Furthermore, our analysis identified significant brain Mn bioaccumulation and enhancement of total dopamine levels in association with locomotor hyperactivity. Although DA levels were restored at adulthood, we observed a deficit in the acquisition and consolidation of memory. Collectively, these findings suggest that developmental exposure to low-level MMT-derived Mn is responsible for the selective alteration of diencephalic DA neurons and with long-lasting effects on fish explorative behaviour in adulthood.

A complex relationship exists between copper stress and the accumulation and release of domoic acid (DA) in toxin-producing Pseudo-nitzschia cells. To clarify the changes and role of DA in this process, we exposed the toxin-producing P. multiseries and the non-toxin-producing P. pungens to copper stress (5 and 9 μM) for 96 h. Results showed that P. multiseries grew better than P. pungens under the two aforementioned copper concentrations. DA content in the cells of P. multiseries increased with increased copper stress, and the dissolved DA in the medium under the 9 μM copper treatment increased. DA addition at a 9 μM copper concentration reduced the copper content in P. multiseries cells and cell walls, but did not change the free copper ion content in culture medium. Adding DA to the medium reduced the malondialdehyde (MDA) content in the cells of P. multiseries under copper stress, DA addition also reduced the activities of catalase (CAT) and superoxide dismutase (SOD) at 5 μM Cu, and the activity of peroxidase (POD) at 9 μM Cu. This suggests that DA may not alleviate copper stress by improving the antioxidant defense system of algal cells, nor can it be complexed with copper ions in the medium to alleviate copper stress. Furthermore, the reactive oxygen species (ROS) scavenger N-tert-butyl-α-phenylnitrone (BPN) was used to study the DA accumulated in cells. The BPN addition significantly reduced the accumulation of DA in the cells under copper stress, suggesting that DA content in cells was closely related to ROS. Moreover, further experiments demonstrated that DA addition can improve the growth of P. multiseries under hydrogen peroxide stress. Our results indicate that DA alleviates P. multiseries oxidative damage when expose to copper stress.