Background, aim, and scope The behavior of polycyclic aromatic hydrocarbons (PAHs) is affected by dissolved organic matter (DOM) present in pore water of soils and sediments. Since partitioning to DOM reduces the bioavailable or freely dissolved PAH concentration in pore water, it is important to assess the effect of environmental variables on the magnitude of dissolved organic matter to water partition coefficients (K DOC). The objective of this study was to apply passive samplers to measure freely dissolved PAHs allowing depletion from the aqueous phase. The method was applied to determine K DOC at different temperatures for a selection of PAHs with natural DOM of very different origin. Materials and methods Freely dissolved concentrations of (spiked) phenanthrene, anthracene, fluoranthene, pyrene, and benzo[e]pyrene were determined by exposing polydimethylsiloxane (PDMS) fibers to aqueous solutions containing DOM extracted from freshwater sediments from Finland and the Netherlands. The K DOC values were subsequently calculated at different temperatures (3.2, 20, and 36°C) by including temperature-dependent PDMS to water partition coefficients (K PDMS) in a mass balance. Furthermore, the effect of temperature on partitioning of PAHs to PDMS fibers or DOM was assessed by comparing the enthalpy of sorption to the excess enthalpy of dissolution of liquid PAHs. Results and discussion Partitioning to DOM resulted in a decrease of freely dissolved concentrations with increasing DOM concentrations and a large range in log K DOC values at 20°C for benzo[e]pyrene was observed (log K DOC = 4.93-6.60 L kg⁻¹ organic carbon). An increase of 10°C in temperature resulted in a decrease of K PDMS by 0.09 to 0.13 log units for phenanthrene to pyrene and a decrease of K DOC by 0.13 log units for pyrene. The calculated enthalpies of sorption were less exothermic than the (negative) excess enthalpies of dissolution as expected for non-specific interactions between PAHs and PDMS or DOM. Conclusions The bioavailability of PAHs in sedimentary pore waters can be accurately determined by application of PDMS fibers (without requiring negligible depletion) in the presence of natural DOM with different sorption affinity for PAHs. The observed natural variability in log K DOC values for different sediments shows that large differences can occur in freely dissolved PAH concentrations in pore water and properties of DOM should be taken into account in predicting the bioavailability of PAHs. Furthermore, the effect of temperature on the partitioning behavior of PAHs shows that interactions between PAHs and environmental sorbents are comparable to interactions between PAHs in their pure condensed liquid phase and calculated excess enthalpies can be safely used to directly correct partition coefficients for temperature. Recommendations and perspectives The application of PDMS fibers in measuring freely dissolved PAH concentrations can be used to study structural and thermodynamic aspects of PAH sorption to natural DOM as well as other environmental processes such as enhanced diffusion phenomena in pore water that are dependent on the amount (or concentration) of DOM, sorption affinity of DOM, and hydrophobicity of PAHs. These environmental factors will therefore give further insight into the site-specific exposure to freely dissolved PAH concentrations in soil and sedimentary pore water.

Background, aim, and scope Primitive wax refining techniques had resulted in almost 50,000 tonnes of acidic oily sludge (pH 1-3) being accumulated inside the Digboi refinery premises in Assam state, northeast India. A novel yeast species Candida digboiensis TERI ASN6 was obtained that could degrade the acidic petroleum hydrocarbons at pH 3 under laboratory conditions. The aim of this study was to evaluate the degradation potential of this strain under laboratory and field conditions. Materials and methods The ability of TERI ASN6 to degrade the hydrocarbons found in the acidic oily sludge was established by gravimetry and gas chromatography-mass spectroscopy. Following this, a feasibility study was done, on site, to study various treatments for the remediation of the acidic sludge. Among the treatments, the application of C. digboiensis TERI ASN6 with nutrients showed the highest degradation of the acidic oily sludge. This treatment was then selected for the full-scale bioremediation study conducted on site, inside the refinery premises. Results The novel yeast strain TERI ASN6 could degrade 40 mg of eicosane in 50 ml of minimal salts medium in 10 days and 72% of heneicosane in 192 h at pH 3. The degradation of alkanes yielded monocarboxylic acid intermediates while the polycyclic aromatic hydrocarbon pyrene found in the acidic oily sludge yielded the oxygenated intermediate pyrenol. In the feasibility study, the application of TERI ASN6 with nutrients showed a reduction of solvent extractable total petroleum hydrocarbon (TPH) from 160 to 28.81 g kg⁻¹ soil as compared to a TPH reduction from 183.85 to 151.10 g kg⁻¹ soil in the untreated control in 135 days. The full-scale bioremediation study in a 3,280-m² area in the refinery showed a reduction of TPH from 184.06 to 7.96 g kg⁻¹ soil in 175 days. Discussion Degradation of petroleum hydrocarbons by microbes is a well-known phenomenon, but most microbes are unable to withstand the low pH conditions found in Digboi refinery. The strain C. digboiensis could efficiently degrade the acidic oily sludge on site because of its robust nature, probably acquired by prolonged exposure to the contaminants. Conclusions This study establishes the potential of novel yeast strain to bioremediate hydrocarbons at low pH under field conditions. Recommendations and perspectives Acidic oily sludge is a potential environmental hazard. The components of the oily sludge are toxic and carcinogenic, and the acidity of the sludge further increases this problem. These results establish that the novel yeast strain C. digboiensis was able to degrade hydrocarbons at low pH and can therefore be used for bioremediating soils that have been contaminated by acidic hydrocarbon wastes generated by other methods as well.

Background, aim, and scope We recently developed a new isolation method for diesel exhaust particles (DEP), involving successive extraction with H₂O, sodium bicarbonate, and sodium hydroxide, in which the sodium hydroxide extract was found to consist of phenolic components. Analysis of the extract revealed that vasodilative-active nitrophenols are in DEP in significantly higher concentrations than those estimated by an earlier method involving a combination of solvent extraction and repeated chromatography. These findings indicated that our new procedure offers a simple, efficient, and reliable method for the isolation and identification of bioactive substances in DEP. This encouraged us to extend our work toward investigating new vasodilatory substances in the sodium bicarbonate extract. Materials and methods DEP were collected from the exhaust of a 4JB1-type engine (ISUZU Automobile Co., Tokyo, Japan). GC-MS analysis was performed with a GCMS-QP2010 instrument (Shimadzu, Kyoto, Japan). Results DEP dissolved in 1-butanol was successively extracted with water, sodium bicarbonate, and then aqueous sodium hydroxide. The sodium bicarbonate extract was neutralized and the resulting mixture of acidic components was subjected to reverse-phase (RP) column chromatography followed by RP-HPLC with fractions assayed for vasodilative activity. This led to the identification of terephthalic acid, p-hydroxybenzoic acid, isophthalic acid, phthalic acid, 3-hydroxy-4-nitrobenzoic acid, 4-hydroxy-3-nitrophenol, and 1,4,5-naphthalene tricarboxylic acid as components of DEP. Discussion The sodium bicarbonate extract was rich in aromatic carboxylic acid components. Repeated reverse-phase chromatography resulted in the successful isolation of several acidic substances including the new vasodilative materials, 4-hydroxy-3-nitrobenzoic acid, and 3-hydroxy-4-nitrobenzoic acid. Conclusions Our new fractionation method for DEP has made possible the isolation of new vasodilative compounds from the sodium bicarbonate extract.

Background, aim, and scope Nanomaterials have been used increasingly in industrial production and daily life, but their human exposure may cause health risks. The interactions of nanomaterial with functional biomolecules are often applied as a precondition for its cytotoxicity and organ toxicity where various proteins have been investigated in the past years. In the present study, nano-TiO₂ was selected as the representative of nanomaterials and lysozyme as a representative for enzymes. By investigating their interaction by various instrumentations, the objective is to identify the action sites and types, estimate the effect on the enzyme structure and activity, and reveal the toxicity mechanism of nanomaterial. Materials and methods Laboratory-scale experiments were carried out to investigate the interactions of nano-TiO₂ with lysozyme. The interaction of nano-TiO₂ particles with lysozyme has been studied in the analogous physiological media in detail by UV spectrometry, fluorophotometry, circular dichroism (CD), scanning electron microscope, ζ-potential, and laser particle size. Results The interaction accorded with the Langmuir isothermal adsorption and the saturation number of lysozyme is determined to be 580 per nano-TiO₂ particle (60 nm of size) with 4.7 × 10⁶ M⁻¹ of the stability constant in the physiological media. The acidity and ion strength of the media obviously affected the binding of lysozyme. The warping and deformation of the lysozyme bridging were demonstrated by the conversion of its spatial structure from α-helix into a β-sheet, measured by CD. In the presence of nano-TiO₂, the bacteriolysis activity of lysozyme was subjected to an obvious inhibition. Discussion The two-step binding model of lysozyme was proposed, in which lysozyme was adsorbed on nano-TiO₂ particle surface by electrostatic interaction and then the hydrogen bond (N-H···O and O-H···O) formed between nano-TiO₂ particle and polar side groups of lysozyme. The adsorption of lysozyme obeyed the Langmuir isothermal model. The binding of lysozyme is dependent on the acidity and ion strength of the media. The bigger TiO₂ aggregate was formed in the presence of lysozyme where lysozyme may bridge between nano-TiO₂ particles. The coexistence of nano-TiO₂ particles resulted in the transition of lysozyme conformation from an α-helix into a β-sheet and a substantial inactivation of lysozyme. The β-sheet can induce the formation of amyloid fibrils, a process which plays a major role in pathology. Conclusions Lysozyme was adsorbed on the nano-TiO₂ particle surface via electrostatic attraction and hydrogen bonds, and they also bridged among global nano-TiO₂ particles to form the colloidal particles. As a reasonable deduction of this study, nano-TiO₂ might have some toxic impacts on biomolecules. Our data suggest that careful attention be paid to the interaction of protein and nanomaterials. This could contribute to nanomaterial toxicity assessment. Recommendations and perspectives Our results strongly suggest that nano-TiO₂ has an obvious impact on biomolecules. Our data suggest that more attention should be paid to the potential toxicity of nano-TiO₂ on biomolecules. Further research into the toxicity of nanosized particles needs to be carried out prior to their cell toxicity and tissue toxicity. These investigations might serve as the basis for determining the toxicity and application of nanomaterials.

Background, aim and scope Photochemical processes can decontaminate the aqueous environment from xenobiotics, but they also produce secondary pollutants. This paper presents field and laboratory evidence of the transformation of 4-chlorophenol (4CP) into 2-nitro-4-chlorophenol (2N4CP). Materials and methods Field monitoring of 4CP and 2N4CP was carried out by solid phase extraction coupled with liquid chromatography-multiple reaction monitoring mass spectrometry. Laboratory irradiation experiments were carried out under a UV-Vis lamp, and the time evolution of the compounds of interest was followed by liquid chromatography. Purpose The purpose of this study was elucidating the pathways leading to 2N4CP from 4CP in paddy field water. Results and discussion The field monitoring results suggest that 4CP can be transformed into 2N4CP in the paddy field water of the Rhône delta (Southern France). The laboratory study indicates that the transformation can take place via photonitration by •NO₂. The nitration process is inhibited by bicarbonate, possibly due to basification that favours the occurrence of the 4-chlorophenolate. The latter could consume •NO₂ without being nitrated. Photonitration in the presence of bicarbonate could account for the observed transformation in the field. Conclusions Photonitration of 4CP to 2N4CP by •NO₂ could account for the observed interconversion of the two compounds in paddy fields. The results are of concern because 2N4CP is biorecalcitrant and toxic. Recommendations and perspectives Bicarbonate can modulate the photonitration of 4CP into 2N4CP, which can be very significant in bicarbonate-poor waters.

Purpose Besides classical organic pollutants and pesticides, pharmaceuticals and their residues have nowadays become recognized as relevant environmental contaminants. The risks of these chemicals for aquatic ecosystems are well known, but information about the pharmaca-plant interactions and metabolic pathways is scarce. Therefore, we investigate the process of uptake of acetaminophen (N-Acetyl-4-aminophenol) by Brassica juncea, drug-induced defense responses and detoxification mechanisms in different plant parts. Material and methods Hydroponically grown Indian mustard (Brassica juncea L. Czern.) plants were treated with acetaminophen and root and leaf samples were collected after 24, 72, and 168 h of treatment. The uptake of acetaminophen and the formation of its metabolites were analyzed using LC-MS/MS technique and enzyme activities including glutathione S-transferases (GSTs) as well as several plant defense enzymes like catalase, ascorbat peroxidase, peroxidase, and glutathione reductase were assayed spectrophotometrically. Results We determined the uptake and the translocation of acetaminophen, and we tried to identify the steps of the detoxification process by assaying typical enzymes, supposing the involvement of the same- or similar enzymes and reactions as in the mammalian detoxification process. After 24-h exposure, effective uptake and translocation were observed to the upper part of plants followed by two independent conjugative detoxification pathways. Changes in antioxidant defense enzyme activities connected to the defense pathway towards reactive oxygen species indicate an additional oxidative stress response in the plants. Conclusions The major metabolic pathways in mammals are conjugation with activated sulfate and glucuronic acid, while a small amount of acetaminophen forms a chemically reactive and highly toxic, hydroxylated metabolite. We identified a glutathionyl and a glycoside conjugate, which refer to the similarities to mammalian detoxification. Increased GST activities in leaf tissues were observed correlated with the appearance of the acetaminophen-glutathione conjugate which shows the involvement of this enzyme group in the metabolism of acetaminophen in plants to organic pollutants and xenobiotics. High acetaminophen concentrations lead to oxidative stress and irreversible damages in the plants, which necessitates further investigations using lower drug concentrations for the deeper understanding of the induced detoxification—and defense processes.

Background, aim, and scope Two new high phenol-degrading strains, Micrococcus sp. and Alcaligenes faecalis JH 1013, were isolated. The two isolates could grow aerobically in mineral salts medium containing phenol as a sole carbon source at concentration of 3,000 mg L⁻¹. It was found that the binary mixed culture of the two isolates possessed good potential for phenol removal. Material and methods Phenol biodegradation using the binary mixed culture of the two isolates was studied. The optimal conditions were determined to be temperature 32°C, pH 7.0, inoculum size 10.0%, and agitation rate 150 rpm in the synthetic wastewater. In addition, the kinetics of the cell growth and phenol degradation by the binary mixed culture were also investigated using Haldane model over a wide range of initial phenol concentrations from 20 to 2,400 mg L⁻¹. Results The experimental data indicated that the binary mixed culture had pretty high phenol degradation potential, which could thoroughly degrade the phenol in the synthetic wastewater containing phenol 2,400 mg L⁻¹ within 72 h under aerobic condition. Under the optimal conditions, the phenol concentration was reduced speedily from 1,000 to below 0.28 mg L⁻¹ in the presence of the binary mixed culture, and the phenol degradation rate reached 99.97% after 16 h. It was well below the standard value 0.28 mg L⁻¹ as described by Chinese Environmental Protection Agency. It was clear that the Haldane kinetic model adequately described the dynamic behavior of phenol degradation by the binary mixed culture with kinetic constants of q max = 0.45 h⁻¹, K sq = 64.28 mg L⁻¹, and K iq = 992.79 mg L⁻¹. The phenol concentration to avoid substrate inhibition had been inferred theoretically to be 252.62 mg L⁻¹. Conclusions Phenol, as the only carbon source, could be degraded by the binary mixed culture at high initial phenol concentrations. Phenol exhibited inhibitory behavior, and the growth kinetics of the binary mixed culture could be correlated well by the simple Haldane's inhibitory model. The kinetics parameters were invariably required for the design and simulation of batch and continuous bioreactor treating phenolic wastewaters.

Background, aim and scope A newly developed fine bubble aeration system, by which air is transferred under supercavitation conditions, shows a clearly better performance than traditional, well-known aerators that rely on the jet-pump principle and its performance can be compared to oxygen transfer rates achieved in membrane and foil plate aerators. Materials and method A prototype supercavitation aerator installed at a sewage treatment plant revealed an air input rate, which was about one third lower than that of the jet-pump system, which it replaced. Results In spite of this low air input rate, the daily demand of pure oxygen for the additionally installed membrane aeration system went down by approximately 49%, from the original level of about 1,200 m³/day to about 600 m³/day—and this over a test period of more than 7 months. Conclusions and discussion The observed high oxygen transfer rates cannot be explained by traditional mass transfer mechanisms. It is assumed that a large amount of water being transferred into the gas phase by supercavitation contacting directly oxygen also in the gas phase and thereby overcoming mass transfer hindrances which might be favoured by hydroxyl radicals. With this new aerator, during the first 3 months of test phase, already more than 10,000 Euros had been saved because of the reduced pure oxygen demand.

Background, aim, and scope Soil remediation with ethylenediamine tetraacetic acid (EDTA) leaching is capable of removing only part of the total metal concentration in the soil, mostly the labile, bioavailable metal species (metal bioavailability stripping). However, reintroduction of remediated soil in the environment exposes the soil to various environmental factors, which could potentially shift nonlabile residual metals back to labile bioavailable forms. We studied the effect of autochthonous earthworm species as model biotic environmental factor on the fractionation and bioavailability of Cu residual in soil after remediation. Materials and methods We used soil from a 50-year-old vineyard regularly managed and treated with CuSO₄•5H₂O (Bordeaux mixture) as fungicide. Soil containing 400 mg kg⁻¹ of Cu was leached with total 15 mmol kg⁻¹ EDTA. Remediated and nonremediated soil was processed by fully clitellated adult specimens of Lumbricus terrestris L., a prevailing autochthonous soil earthworm species. Cu fractionation, phytoavailability, and oral-bioavailability in processed and nonprocessed soil were determined using six-step sequential extraction, extraction with diethylenediamine pentaacetic acid, and in vitro physiologically based extraction test, respectively. Results EDTA leaching removed 41% of the pseudototal Cu, mostly from the soil Fe- and Mn-oxides, carbonates, and organic matter. A 2.7-fold decrease in Cu phytoavailability and a 4.4- and 2.8-fold decrease in Cu oral-bioavailability in the stomach and small intestine fractions, respectively, were achieved after remediation. In nonremediated soil, earthworms increased the share of nonlabile Cu in residual soil fraction, while in remediated soil they increased the share of Cu bound to carbonates. A statistically significant 1.1- and 1.7-fold increase in Cu phytoavailability and intestinal oral-bioavailability, respectively, was observed in earthworm processed remediated soil. Discussion Cu occurs in various soil “pools” of different solubilities with different chemical characteristics and consequently different functions. By removing the labile part of the metals from the soil during remediation, we disrupt the chemical equilibrium; the nonlabile residual metals left in soil after remediation might become more labile in time in tendency to re-establish that equilibrium. Earthworms alter the physical and chemical properties of soil affecting consequently the fractionation of metals. The increase in earthworm's gut pH due to the excretion of ammonia and/or calcium carbonate into the intestine could lead to the transbounding of metals into the carbonate fraction. However, their activity in remediated soil increased Cu phytoavailability and intestinal oral-bioavailability, and it would, therefore, be improper to generalize the influence of earthworms on metal availability in soil. Conclusions The results presented here show that residual Cu in remediated soil is affected by environmental factors such as earthworms, which should be considered in evaluating the effect of Cu polluted soil remediation. Recommendations and perspectives Information on the behavior of residual metals in soil after its remediation is surprisingly scarce. The development of new effective remediation techniques should imply also the evaluation of postremediation effects on remediated soil. The results presented in this work indicate a possible tool for assessing the effect of biotic environmental factors on residual metals left in soil after its remediation.

Background, aim, and scope Aquatic microcontaminants (MCs) comprise diverse chemical classes, such as pesticides, biocides, pharmaceuticals, consumer products, and industrial chemicals. For water pollution control and the evaluation of water protection measures, it is crucial to screen for MCs. However, the selection and prioritization of which MCs to screen for is rather difficult and complex. Existing methods usually are strongly limited because of a lack of screening regulations or unavailability of required data. Method and models Here, we present a simple exposure-based methodology that provides a systematic overview of a broad range of MCs according to their potential to occur in the water phase of surface waters. The method requires input of publicly available data only. Missing data are estimated with quantitative structure-property relationships. The presented substance categorization methodology is based on the chemicals' distribution behavior between different environmental media, degradation data, and input dynamics. Results Seven different exposure categories are distinguished based on different compound properties and input dynamics. Ranking the defined exposure categories based on a chemical's potential to occur in the water phase of surface waters, exposure categories I and II contain chemicals with a very high potential, categories III and IV contain chemicals with a high potential, and categories V and VI contain chemicals with a moderate to low potential. Chemicals in category VII are not evaluated because of a lack of data. We illustrate and evaluate the methodology on the example of MCs in Swiss surface waters. Furthermore, a categorized list containing potentially water-relevant chemicals is provided. Discussion Chemicals of categories I and III continuously enter surface waters and are thus likely to show relatively steady concentrations. Therefore, they are best suited for water monitoring programs requiring a relatively low sampling effort. Chemicals in categories II and IV have complex input dynamics. They are consequently more difficult to monitor. However, they should be considered if an overall picture is needed that includes contaminants from diffuse sources. Conclusions The presented methodology supports compound selection for (a) water quality guidance, (b) monitoring programs, and (c) further research on the chemical's ecotoxicology. The results from the developed categorization procedure are supported by data on consumption and observed concentrations in Swiss surface waters. The presented methodology is a tool to preselect potential hazardous substances based on exposure-based criteria for policy guidance and monitoring programs and a first important step for a detailed risk assessment for potential microcontaminants.