A simple and rapid method for the highly sensitive determination of polycyclic aromatic hydrocarbons (PAHs) from airborne fine particulate matter (PM2.5) in an urban environment of Delhi was developed. The target compounds were 10 of the 16 United States Environmental Protection Agency (US-EPA) priority PAHs: fluoranthene, pyrene, chrysene, benzo(a)anthracene, benzo(b)fluoranthene, benzo(k)fluoranthene, benzo[a]pyrene, dibenzo(ah)anthracene, benzo(ghi)perylene, indeno(1,2,3-cd)pyrene. For collecting the samples, the following two locations in Delhi (India) were chosen: ITO and Okhla Industrial Area.  Two sets of samples at these locations of were collected for the purpose of investigation. The fine particulate matter samples were collected on glass fiber filter papers for 24h, from which the PAHs were extracted using dichloromethane (DCM) and hexane using ultrasonication method. Comparison of the characteristic emission of spectra of PAHs with standard spectra indicated the degree of condensation of aromatic compounds present in the investigated mixtures. However, this identification could be more effective with the use of the respective values of Δλ parameter for each particular component of the mixture. It has been found that the concentration of the PAHs is maximum during the winter season and minimum during the summer and monsoon seasons at both the locations.

Ologe Lagoon is one of Lagos, Nigeria’s five major lagoons, which provide essential ecosystem services such as agriculture, fishing, transportation, salt and sand mining, tourism, and industrial development. There are concerns, however, that the lagoon’s water may not be safe for the ecosystem functions it offers. As a result, the physicochemical properties, heavy metal concentrations, and microbial loads of water samples from the lagoon, as well as their health risks, were examined in this study. Physicochemical analysis showed that calcium, chloride, nitrates, sulphate, dissolved oxygen, acidity, alkalinity, total dissolved solid, and total suspended solid were present within the World Health Organization permissible limits, but not so for phosphate and temperature. The heavy metal analysis revealed that the water had non-permissible levels of iron, cadmium, chromium, nickel, manganese, and copper, but lead was normal. The microbiological examination showed abnormal bacteria counts, while coliform and fungus were not detected. The average daily oral and dermal exposure to cadmium, chromium, and nickel were higher than the recommended daily intake, but iron, lead, and copper were within the limits. The hazard quotient of oral and dermal exposure to cadmium, dermal exposure to chromium, and oral exposure to manganese were higher than the recommended limit (> 1). The carcinogenic risks of Cd, Cr, and Ni were also greater than the acceptable limit. The results obtained indicate that Ologe Lagoon’s water is unsafe for the lagoon’s ecosystem functions. Relevant agencies should ensure that waste is treated before being discharged into the lagoon.

New Delhi Metallo-β-lactamase-1(NDM-1) is an enzyme that hydrolyzes a wide range of β-lactams antibiotics, including carbapenems. The presence of the NDM-1 inhibits the potential of β–lactam antibiotics in treating infections caused by bacterial strains carrying such resistances, thus leaving minimal treatment options available. Due to this, the rapid distribution of NDM-1 harboring bacteria accounts for a significant public health menace worldwide. These bacteria have been detected in clinical specimens and environmental compartments where bacterial infections are ubiquitous. In this study, identification and absolute quantification of NDM-1 in sixteen lake sediment samples collected in and around Hyderabad, India, was carried out using a real-time quantitative polymerase chain reaction (qPCR), and the results were expressed in gene copy number/ng (nanogram) of template DNA. Thirteen samples (out of sixteen) displayed a positive signal for NDM-1 during the qPCR analysis with the highest gene copy number/ng of template DNA (71.8) being observed in the Amberpet STP. Three samples, samples from Durgamcheru lake, Kandi lake, and Singur dam, were negative for the NDM-1 during the qPCR analysis. Hierarchical clustering analysis was performed to categorize the sampling location into different clusters based on pollution sources and the observed results were expressed in the form of a dendrogram.

The assessment of human health risk associated with accumulation of lead, copper, zinc, nickel, and Arsenic in the muscle of bartail flathead (Platycephalus indicus) collected from Jofreh pier and Bushehr port, northwest of the Persian Gulf of Iran was examined. A total of 80 P. indicus were collected and analysed using ICP-OES from two seasons (summer and winter) of 2019; estimated daily intake (EDI), estimated weekly intake (EWI), target hazard quotient (THQ), hazard index (HI) and Carcinogenic risk (CR) were determined. The mean concentration (μg/g) range were observed as: zinc (16.37-50.17)> As (5.65-8.83)> Cu (2.19-3.63)> Pb (0.62-6.37)> Ni (0.17-1.08). Hazard index (HI) for adult and children during consumption of P.indicus was <1, the highest HI values were calculated for adults (0.06) in Bushehr and children (0.14) in Jofreh. The CR levels for Ni and Pb were within acceptable limits (10-6 to 10-4) and arsenic was unacceptable (> 10-4) at sampling sites.

Objectives:To compare water quality parameters in the vicinity of Gas Flaring Area of Ebocha-Obrikom of Rivers State with that of the recommended standards.Methods:The research utilized standard analytical procedures. All sampling, conservation, transportation and analysis followed standard procedures described in APHA (2012). All the samples collected were transported to the laboratory through keeping in an icebox to prevent degradation of the organic substances.Results:Result depicts that Turbidity, DO, BOD, COD, TSS, Magnesium, Iron, Cadmium, Lead, Chromium, and Nickel exceeded the desirable limit meant for drinking purpose as well as could potentially pose threats toward human society. Hence, remain unsuitable for drinking, as the inhabitants were more vulnerable for their total lifetime period of exposure through continuous consumption of unsuitable drinking water.Conclusion:It is recommended that the local government environmental health officers and other regulatory agencies frequently monitor the levels of these pollutants within the area and also ensure strict adherence to guidelines to ensure a healthy environment. As exposure to the above stated parameters can have a remarkable impact on human health living in the vicinity of the gas flaring area by drinking water around the study area; thus, groundwater needs to treated before using for household purpose or drinking. Thus, this study would help in decision making for stakeholders and relevant authorities in the execution of reasonable groundwater management strategies and remediation plans in the area to protect public and environmental health.

Preparation of an efficient hybrid structure photocatalyst for photocatalytic decomposition has been considered a great option to develop renewable technologies for environmental remediation. Herein, ternary magnetic Fe3O4/GQD/g-C3N4 nanocomposite (FGC) was prepared using the ball mill method. Binary nanocomposites Fe3O4/g-C3N4 (F/CN) and GQD/g-C3N4 (G/CN) were prepared to compare photocatalytic activity with FGC. The performance of photocatalysts for degradation of rhodamine B (RhB) was studied. EDX results showed that Fe3O4, GQD and g-C3N4 nanoparticles (NPs) are uniformly distributed in the FGC. The FGC nanocomposite shows superparamagnetic behaviour with a saturation magnetization of 12 emu. g-1, which makes it favourable compound for magnetic separation procedure. Photocatalytic activity of FGC (100%) was much higher than those of the G/CN (88%) and F/CN (77%) photocatalysts. The superior activity of FGC compared to binary composites was attributed to broader absorption in the visible light band and greater suppression of electron-hole recombination. The photocatalytic degradation of RhB using FGC was consistent with pseudo-first-order kinetics. The reusability of FGC was examined for four runs and no noticeable decrease was observed with the same irradiation time for each run. Finally, it can be argued that FGC photocatalyst can be an efficient semiconductor for the degradation of organic dyes from wastewater.

The biotoxins can enter the marine food chain, and, accordingly, seafood consumers are also at risk of ingesting toxins from contaminated aquatic animals. Hormozgan Province in the north of Persian Gulf is an area with high industrial and urbanization rising rate. In the present work, the aim was to identify the okadaic acid and domoic acid producers in the coastal waters and to investigate on their accumulated concentrations in edible bivalves in order to assess the consumer’s health risk. Water samples were collected during winter 2018 and summer 2019 from one blank and four stations facing industrial and municipal effluents. Four species of edible bivalves were collected from coastal lines of Hormozgan province, at the lowest tide time. The concentrations of toxins were determined by indirect competitive ELISA method. Pseudonitzschia delicatissima, Nitzschia punges and Nitzschia seriata in the production of domoic acid and Dinophysis caudate, Prorocentrum Lima and Ceratium tripos in the production of okadaic acid were identified. The okadaic acid concentrations ranged from 59.8 ± 2.38 to 121.96 ± 28.25 µg/kg, ranging from 0.85 to 83.59 ± 38.72 for Domoic acid. Among the studied bivalves, Pinctada radiate contained the maximum concentrations of measured toxins. For the first time at Hormozgan Province, the consumption guidelines for domoic and okadaic acid were calculated. The human health risk assessment showed that at present time, the algal consumers from Hormozgan province are not at risk of domoic and okadaic acid toxins.

Pars special economic energy zone (PSEEZ) in Iran is the second largest energy zone in the world with more than 60,000 operational and non-operational personnel. Considering the nature of the activities being done in PSEEZ, it is rational to expect that a wide range of hazardous materials be present in the air composition of this area. It is shown in this research that Benzene-Toluene-Ethylbenzene-Xylene (BTEX) are the most challenging in PSEEZ and benzene concentration violates the standards in all sampling points. The study area is divided into three subzones of gas refineries, petrochemical complexes and non-operational areas. In the gas refineries, benzene concentration is recorded to be 480 times higher than the standard for exposure limit. The concentration of benzene in petrochemical complexes is also about 160 times higher than the standard limit. Considering the vicinity of the petrochemical complexes the cumulative impacts of BTEX will also worsen the situation regarding BTEX cancer risk. In non-operational areas, benzene concentration reaches 40 times higher than the standard limit which is a serious health challenge. Comparing the data of BTEX distribution with AQI proves that AQI solely is not an appropriate index for assessing the air quality in PSEEZ and defining local indices for air quality assessment with taking hazardous chemicals such as BTEX into account. Moreover, some other pollutants such as heavy metals and H2S are detected in the air quality in significant amounts which raise the need to a reconsideration in location of unprotected non-operational personnel.

Mercury pollution is an issue of global concern. In Colombia, the use of contaminated water for food crop irrigation and artisanal mining contributes to mercury pollution in soil, affecting food production and restoration of disturbed areas. Mycorrhizal fungi are symbionts that provide benefits to plants including resistance to heavy metals, but fungal effects on germination remain to be fully described. This study tested the effect of mercury and mycorrhizal fungi on Lactuca sativa seed germination. A 2x5 completely randomized factorial experiment was developed to assess the effect of five HgCl2 polluted treatments, two mycorrhizal treatments (i.e., with inoculum, without inoculum), and the interaction of both factors on seed germination, seedling root colonization, pH, and final water content. In samples with no mercury pollution, mycorrhizal fungi had an inhibitory effect on seed germination. Likewise, the effect of mercury on seed germination is significantly inhibitory. However, pots inoculated with arbuscular mycorrhizal fungi showed constant germination probabilities, independently of mercury concentration. According to the best model determined for the data, a key step in the mitigation of mercury toxicity in seed germination is to prevent substrate pH changes. The environmental conditions of the experiment contributed to densely activate populated biomass of inoculum, which promoted root invasion from various points. Overall, the presence of mycorrhizal fungi in seedbeds could lead to a reduced number of plant individuals. However, the use of fungal inoculum in polluted environments, highly contributes to plant establishment, which is relevant in further vegetable cultivations growing in soil polluted areas.

Lignin rich solid residues after saccharification during the production of ethanol from lignocellulosic substrates are major concern during past times. These solid residues left after the saccharification of Coir pith and Bit fiber waste are pyrolysed at 350 oC to yield biochar, which has been characterized and its potential for removal of Malachite Green, a dye present in the effluents from coir product manufacturing units are studied. FTIR and XRD spectra revealed the diverse functional groups present on the surface of biochar. SEM images showed the porous structure of the biochar. A maximum dye removal efficiency of 99.5% was achieved using Coir Pith Biochar (1 %) within 24 hours of treatment at a dye concentration of 100 mg/l. The removal efficiency was 99.4 % using Bit Fiber Biochar (0.8 %) in the same treatment period. The efficiency of removal was enhanced on adjusting the pH to 4 at which the dye removal of 99.6 % and 99.7 % was achieved using Bit fiber biochar and Coir pith biochar respectively. The residence time was significantly reduced to 2 and 4 hours respectively for bit fiber and coir pith biochar at pH 4 and hence the produced biochars are cost effective adsorbents for removal of dyeing effluents in wastewater. The adsorption fits into pseudo-second order kinetics and is well described by langmuir isotherm model. This would also facilitate the sustainable use of spent solid substrates left after lignocellulosic ethanol production in a more economical way.