Marinating is a simple technological treatment used to improve the tenderness and flavour of meat by soaking it in an aqueous solution which is composed of different ingredients. That also increases water brinding capacity of meat, thus reducing cooking losses and improving meat juiciness. The aim of current research was to investigate a degree of preference of marinated roasted venison meat. The red deer (Cervus elaphus) meat samples were obtained from a local farm “Saulstari 1”. The experiments were carried out in the Latvia University of Agriculture, Faculty of Food Technology. Prepared samples were marinated at 4 ± 2 deg C temperature in the refrigerator for 48 ± 1 h. After marinating, venison meat samples were wrapped in aluminium foil, and cooked on a pre-heated double hotplate grill at 200 ± 2 deg C temperature until ready to eat (45 ± 2 min). The cooked hot meat samples were sensory evaluated. The sensory evaluation was carried out by using the nine point hedonic scale – ISO 4121:2003. The sensory evaluation of meat sample with thyme and juniper berries showed that the degree of preference was not so high (approximately – 6.0 points). For the venison meat preliminary treatment mayonnaise and tomato sauce marinades possibly could be recommended for acquiring better sensory properties of ready to eat product.

Highbush blueberries are thought to provide protection against oxidative damage of free radicals and contribute to positive health benefits. They have been studied little in Latvia; therefore, the aim of study was to evaluate the soluble solids content, titratable acidity and sugar content of berries harvested in 2010. Seven varieties of cultivated highbush blueberries (Vaccinium corymbosum L.) grown in Latvia were analysed. Analyses were done for frozen berries of varieties ‘Bluecrop’, ‘Chandler’, ‘Chippewa’, ‘Duke’, ‘Northblue’, ‘Patriot’ and ‘Polaris’. All experiments were performed at the Latvia University of Agriculture, Faculty of Food Technology. The content of titratable acids (TA) was detected using standard method ISO 750:1998 by titration with 0.1N NaOH. Soluble solids content (SSC) was analysed using standard method ISO 2173:2003 by hand refractometer. Sugars (fructose, glucose and sucrose) were analysed by high-pressure liquid chromatography HPLC analysis. Results showed that there are significant differences between varieties (p is less than 0.05) for all parameters. TA content varied from 0.4 – 1.2%, SSC - 8.5 – 10.8 degBrix and total sugars from 7.6 to 9.3 g 100 gE-1. The highest ratio between sugars and titratable acids was for ‘Polaris’ while the lowest – ‘Chandler’ and ‘Bluecrop’.

Quality assessment of a study programme is a topical issue in the single education area. Quality is not a unequivocal term in higher education area, which lends itself to many understandings and interpretations according to different criteria. The best practice of software engineering may be applied for the study programme evaluation if by analogy it is viewed as software product. Study programme similar to software product has internal and external quality. Students as direct users of the study programme may be engaged in the evaluation of its external quality, in case the evaluation of internal quality of the study programme is mainly based on internal resources of a higher education institution. The paper provides the methodology for evaluation of external quality of a study programme based on software product quality model and quality assurance standards. Approbation of the methodology was started in 2009 at the Faculty of Information Technologies, where students evaluated external quality of undergraduate study programmes. Results obtained during the approbation lead to the conclusion that the chosen methodology ensures significant information for the enhancement of quality of a study course and simultaneously the entire study programme.

Metabolic analysis is one of the research focuses of systems biology. Two aspects of metabolic networks -network topology and stoichiometry - are what current researchers are most interested in, and both studies have revealed significant information. The research of the stoichiometric matrix of metabolic network has generated a series of powerful methodologies such as flux balance analysis (FBA). For FBA different methods execution are used different software like COBRA Toolbox and FBA-SimVis. The aim of this paper is to compare and analyze functionality of these two toolboxes, metabolic network data conformation conditions, and to compare all available FBA methods comparison in calculation possibilities and visual interpretation way. FBA, when analyzing all fluxes using different options, gives results in its metabolic network flow chart, although Cobra Toolbox returns the results in the matrix in number formats. FBA-SimVis for Steady state metabolic network models analysis is provided for a small metabolic network, because making some FBA analysis there are a ten possibilities to change an unlimited count of variables, to choose or change or optimize reactions as variables. Cobra Toolbox for Steady state metabolic network models analysis is provided for greater metabolic networks with hundreds or thousands of reactions. It allows changing an unlimited count manipulating and optimizing reactions fluxes.

Forest resources are Latvian national treasure that plays an important role in both ecology and economics of Latvia. Although a number of studies give summaries of statistical data, they have also been used as the basis for this study. Therefore, statistical analysis of the data on acquisition, regeneration, import and export of forest resources in Latvia has been carried out in this study. The aim of the study is to identify the available statistical information on the forest resources in Latvia by ascertaining the amount of available information, types of statistical data used in identifying information on tree felling, annual afforestation, import and export, and to carry out analysis of the acquired data. The statistical information has been obtained from the websites of the State Forest Service and the Statistical Office of the European Communities (Eurostat). As a result of the study, we have obtained the dynamics of tree felling and forest regeneration by dominant tree species. The study also reveals the dynamics of import and export of timber resources of the main products. The study was carried out in 2011, in Latvian.

Severe damages of spruce stands were found during recent years in several countries of the Baltic sea region. Characteristic indications of these damages are trees with brownish drying tops distributed across the whole compartment. During the first year only forests on drained organic soils suffer. In the second and third years, according to experiences gained in Lithuania, the damages move to other stand types. In Latvia, the first signals about the damages of spruce stands arrived from the company ''Rīgas meži'' in May, 2010. ''Rīgas meži'' found damaged stands in 2 forestries. The most of the damaged stands were on organic soils. The inspection of other forests by the State forest service identified similar damages in Southern part of Latvia as well as in other regions with considerable areas of organic soils. In August, 2010 ''Rīgas meži'' did their own inspection in Olaine and Tīreļi forestries and found out that 24% of spruce stands has characteristic signs of damages, and in 10% of stands dead or significantly damaged trees were found. Due to theses damages, about 300 ha of spruce stands were harvested in sanitary clear-felling in 2010. Spreading of spruce bud scale, Physokermes piceae (Schrnk.), is found to correlate with damages of spruce stands in Latvia and Lithuania. This pest is well known in both countries, but never before it caused any serious damages to spruce stands. In Sweden another bud scale insect (Physokermes inopinatus Danzig and Kozár) is found to be the reason for spruce damages.

The role of small and medium-sized enterprises (SME) in the development of economics becomes more important, as they can quickly re-orientate in the rapidly changing economic situation, and they are the main guarantee of wellbeing on the regional scale. Although these enterprises are different, still the SME in the European Union meet several similar difficulties. One of the main problems of the SME is lack of management competences that causes difficulties in ensuring efficient management of the enterprises. The aim of the research was to investigate the competences that are necessary for the employees to carry out their duties from the point of view of small and medium-sized forest enterprises (SMFE). The task of the research was to identify problems faced by the SMFE management in daily business. To get results, the qualitative interview method was used as well as, survey was carried out, and the obtained data from well-established methodology and criteria were evaluated. The research results show that the distribution at the SME is specific professional competence with 40%, social competence with 23%, methodical and individual competence with 19% and 18%. The results show that necessary management competences in SME and large enterprises are equal, but the kind of their application and topicality differ; therefore, it is essential to organize activities of professional development concerning the definite model and type of business. The professional teaching models for SMFEs should be according to enterprises management specifics, focusing on the fact that managers of SMFEs to combine the competences.

Invention of light weight panel with a trade mark of Dendrolight is one of the most distinguished wood industry innovations of the last decade. At present three layers cellular wood panels have wide non structural application. The aim of the research is to evaluate the bending properties of three layer cellular wood panels for structural application. There were 8 specimens manufactured with thickness 136 or 152 mm, width 300 mm and length 2,500 mm of each of the six horizontal load bearing panel structural models. Scots pine (Pinus sylvestris L.) cellular wood and solid pine wood ribs were used as internal layer of the structural panels. Cellular wood core was placed in horizontal or vertical direction. Scots pine solid wood panels and birch plywood were used as top layer material. Applied glue was polivinilacetate Cascol 3353. The most common stress type in structural subflooring panels is bending; therefore, the influence of the cellular material orientation, ribs and top layer material on the sandwich type structural panel bending strength (MOR) and stiffness (MOE) were evaluated according to LVS EN 408:2011. Extra parameters like moisture content and apparent density were determined. Cellular wood in vertical direction can be used as raw material for structural panel production. Panels with solid timber external layers, with ribs and with vertical orientation of the cellular material showed the highest MOR (35.2 N mmE-2) and MOE (11,500 N mmE-2) values. The influence of the solid wood ribs on the bending properties is directly dependent on external layer material.

The theoretical part of the paper presents an overview of trends in the solution of economic and social problems in rural areas and rural development. It also makes an inventory of modern theories on European rural development and analyses aspects of strategic management of the activities of regional and rural communities. The documentary part of the paper analyses the EU and Lithuanian regional and rural development policy, the developments in the implementation of the EU LEADER programme in Lithuania in 2003 – 2010 and opportunities for its improvement, the establishment of local action groups (LAGs) and their key activities. The empirical part of the paper examines the activities of LAGs in Ukmerge and Radviliskis regions and offers a comparative analysis of the content of five strategies produced by the two LAGs for the period between 2003 and 2013. The research has demonstrated that the five rural development strategies of both LAGs are based on the principles of collaboration among the representatives of local authorities, businesses and rural communities, continuity and consultations with local population. The discussion part focuses on the guidelines for the improvement of the strategic management of rural development. The conclusions present an overview of the typical features, priorities, aims and objectives of the strategies of both LAGs.

The investigations were carried out in the Lithuanian Agricultural University Water Research Institute land plots in the Endocalcari Endohypogleyic Cambisols (CMg-n-w-can). The basis of the investigation is 3 variants field experiment. Each variant consists of 3 in 0.54 ha drainage. The traditional arable farming is applied in variant I. In the variant II the land is not being cultivated, but in spring the perennial ryegrass (‘Lolium perenne L’) is being seeded into the spring barley and kept till spring. In the variant III the land is not being cultivated after the harvest and left for the rest till spring. The variant II is distinguished by the minimal mineral nitrogen content. Applied to cultivated and uncultivated land, the min N reserves are increased 51 - 83 and 33 - 40 and 11 - 101 and (38 - 134%) (to 9.5 - 14.3 mg kgE-1 and 152 - 68 and 154 - 61 kg haE-1). The average investigation of N concentration in the drainage water shows, that the minimum concentration of this element was in the second variant. Applied to the traditional farming and uncultivated land, the N concentration is increased by (30 - 42% to 34 and 37 mg lE-1). By average data the min N, leaching by drainage water in the variant II was minimal and about 27 kg haE-1. Applied to the arable farming and uncultivated land, the min N leching is increased (30 - 55%) (to 35 - 42 kg haE-1).