In cheese-manufacturing process, cutting time greatly affects moisture, yield, and quality of cheese as well as whey fat losses. The objective cutting time determination is extremely important to both the quality and the quantity of cheese being produced. Taking into account the importance of accurate cutting time determination for economic and practical aspects, numerous instrumental techniques have been developed to assess cutting time based on a wide range of mechanical, vibrational, ultrasonic, thermal or optical instrument methods. In this article, information about advanced instrumental methods applied to the analysis of cutting time will be given.

Because of using sulphur free fertilizer, rice crop facing tremendous sulphur (S) deficiency throughout the world as well as in Bangladesh. However, farmers of Bangladesh often overlook the importance of sulphur fertilization on rice yield. Therefore, the present study was conducted to investigate the influence of different levels of sulphur on growth, yield attributes and uptake of N, P, K and S by grain and straw of BRRI dhan41 rice variety. The experiment was laid out in randomized complete block design with three replication and eight treatments including control. The result of the study revealed that the highest plant height, panicle length, filled grain was found in T1 (50% RFD of S) treatment, while the utmost number of effective tiller and straw yield was recorded in T5 (150% RFD of S) treatment. Interestingly, maximum grain yield as well as uptake of N, P, K and S by grain and straw was significantly higher in T6 (175% RFD of S) treatment. The highest grain yield of T6 treatment might be due to maximum nutrient use efficiency. However, in all cases control treatment (T0) gave the worst result. The present study clearly indicates that higher rates (175% of the recommended dose) of S along with other fertilizers may be recommended for better growth and yield of BRRI dhan41 in Bangladesh soil.

The effect of temperature and pH on adsorption-desorption of fungicide hexaconazole was studied in two Malaysian soil types; namely clay loam and sandy loam. The adsorption-desorption experiment was conducted using the batch equilibration technique and the residues of hexaconazole were analysed using the GC-ECD. The results showed that the adsorption-desorption isotherms of hexaconazole can be described with Freundlich equation. The Freundlich sorption coefficient (Kd) values were positively correlated to the clay and organic matter content in the soils. Hexaconazole attained the equilibrium phase within 24 h in both soil types studied. The adsorption coefficient (Kd) values obtained for clay loam soil and sandy loam soil were 2.54 mL/g and 2.27 mL/g, respectively, indicating that hexaconazole was weakly sorbed onto the soils due to the low organic content of the soils. Regarding thermodynamic parameters, the Gibb’s free energy change (ΔG) analysis showed that hexaconazole adsorption onto soil was spontaneous and exothermic, plus it exhibited positive hysteresis. A strong correlation was observed between the adsorption of hexaconazole and pH of the soil solution. However, temperature was found to have no effect on the adsorption of hexaconazole onto the soils; for the range tested.

In the present study effects of different levels of hydrolyzed oak tannin on Japanese quail, live body weight and live body weight gain, food intake, food conversion efficiency and mortality rate were investigated. Therefore, a total of 240 quails were weighed and divided into 4 treatment groups each with 3 replicates containing 20 birds and reared in flat for 42 days as experimental period. While one of the groups was fed control diet with no additives (0% tannin A), other groups were fed with the different percentages of tannin on their diets, which are 0.5% (B), 1.0% (C), 1.5% (D) respectively. It has been observed that Japanese quails that fed the oak tannin containing diet had slower growth rate and poorer feed conversion efficiency and high mortality rate than birds fed with a tannin-free diet.

Extraction of deoxyribose nucleic acid (DNA) from plants is preliminary step in molecular biology. Fast and cost effective genomic DNA isolation from Glycine species for downstream application is a major bottleneck. Here we report a high throughput and trouble free method for genomic DNA extraction from leaf and seeds of Glycine species with high quality and quantity. Protocol reports the optimization by employing different concentrations of CTAB and PVP in extraction buffer. Efficiency of optimized protocol was compared with frequently used DNA extraction methods. Wide adoptability and utility of this protocol was confirmed by DNA extraction from leaves as well as seeds of G. max, G. soja, G. tomentella and G. latifolia. Extracted DNA was successfully subjected to PCR amplification of five microsatellite markers and four putative glycosyltransferase genes. DNA extraction protocol is reproducible, trouble free, rapid and can be adopted for plant molecular biology applications.

The aim of this study was to determine the growth parameters of European Flounder fry (Platichthys flesus luscus L. 1758) caught from the nature in different feeding methods in aquaculture conditions. The study was conducted between April and July 2011, and the fish were collected at the connection point of Sarıkum Lagoon with the Black Sea in Sinop Province using seines and large scoops. A total of 750 European Flounder with the average weight of 0.93±0.01 (0.71-1.21) g were stocked in 5 groups with 3 repetitions. The groups were organized according to the feeding protocols [G1:90 days Chironomid larvae (CL), G2:60 days CL+30 days CL+ granular feed (GY), G3:30 days CL+60 days CL+ GY, G4:90 days CL+GY, G5:90 days GY]. At the end of the study, the weights of the fish were determined as 10.83±0.51, 9.89±0.22, 6.33±0.21, 5.13±0.11, 3.81±0.09, respectively. It was found that feeding preferences of the fish had significant effects on weight gain, specific growth rate, feed conversion ratio and survival rate. European Flounder fry, as in their natural habitat, mostly preferred natural feed moving in the deep in the production site. It was determined that using live feed as the starter feed for the adaptation of European Flounder fry had a significant effect on growth parameters and survival rates.

Mushroom production that started in 1960's in Turkey gained economic value from the 1990's and it started improving as a commercial sector after that time. While Turkey mushroom production was 80 tons in 1973, it increased up to 45.000 tons in 2014. There is a rapid changes and improvement in cultivated mushroom production and consumption in Turkey. The object of the study is to reveal current status of mushroom production in the world and Turkey, and the problems of the mushroom sector in Turkey and the necessary precautions and ways to solve these problems. The data obtained from the inspections of the mushroom enterprises that in mushroom production regions of Turkey, and the secondary data obtained from Food and Agriculture Organization of the United Nations (FAO), Turkish Statistical Institute (TUIK) and Union of Antalya Exporters (AIB) and also national and international publication’ data has been used in this study. In Turkey, Mediterranean and Marmara Regions rank first in mushroom production and consumption with the share of 61.5 and 40%, respectively. It has been determined that big enterprises producing mushroom and compost established in the Central Anatolia in this study. The number of enterprises producing mushroom by using technology increases and 15-20% of the total production are provided by the big enterprises having 2000 m2 and over mushroom production areas. Recent years, there are serious increases in the production of different mushroom species such as especially Pleurotus ostreatus. In addition, precision agriculture applications are widespread with the time. For the continuation of growth of the mushroom sector in Turkey and the solving of the sector problems, there are needs both in making the necessary changes in legislation and to be given priority researches related to mushroom production in university and public research institutions and also to support them.

In this study, the effects of some herbal wastes such as daphne (Laurus nobilis), thyme (Origanum onites) and cumin (Cuminum cyminum) on the yield of Pleurotus ostreatus were investigated. While compost formula consisted 43% wheat straw+ 43% poplar dust+ 10% wheat bran+ 4% gyps mixture was used as the control group, 20% to 40% of herbal waste was added to this formula in the experiment groups. Total number of mushroom was counted in both the experiment and the control groups. Then, the harvested mushrooms were weighed and morphological features of caps were measured and recorded. As a result of obtained data, while it was detected that compost contained 20% cumin waste had the highest number of primordium (34), the control group had the lowest number of primordium (21 items). The highest biological yield was detected as 35.8% in the group contained 20% cumin waste. The lowest biological yield was detected in the control group with 24.6%.

Turkey is gene center of many plant species and is a country that different endemic plant species are found. A vast geography and the presence of different climatic conditions cause either diversity of plant genetic resources or macro fungi species. Many species of mushrooms grow spontaneously in nature. According to the demand from different country preferred different mushroom species, some mushroom species collected from nature are exported each year. In this study, it was aimed to determine the properties of macro fungus exporting companies resulting in an evaluation based on exported macro fungus species, the amount, regions where the species are collected and mushroom exportation.

Charcoal rot is a soil and seed borne, economically important fungal disease on dry bean in Turkey. Twenty bean isolates of M. phaseolina collected from different locations in Turkey during 2008 and 2012 years were studied for genetic variability using random amplified polymorphic DNA (RAPD) assay, chlorate sensitivity on medium supplemented with 120mM of potassium, phenotype of colony, and pathogenicity. Isolates were identified as M. phaseolina based on morhological features and PCR assays using species-specific primers (MPKF1and MPKR1). Isolates of M. phaseolina were analysed for their aggressiveness on the susceptible bean cv. Akman 98, by soil inoculation method. Isolates exhibiting a dense chlorate phenotype were chlorate-resistant, while those possessing feathery and restricted chlorate phenotypes were chlorate-sensitive. More than half of the isolates (55%) were resistant to chlorate and produced dense phenotype, while 35% isolates showed feathery and two isolates (10%) showed restricted growth. DNA from 20 isolates was subjected to genetic diversity analysis by the RAPD method using 14 randomly chosen 10-base random primers, and low genetic diversity (33.3%) was observed among the tested isolates.