Field Intercomparison of Main Components in Air in EMEP
2007
Aas, Wenche | Schaug, Jan | Hanssen, Jan Erik
Within the European monitoring network (EMEP, http://www.emep.int) several different sampling procedures for measuring the main air components have been applied. This has contributed to systematic concentration differences and a comparability problem. Since 1997 co-located experiments in 15 countries have been carried out to quantify these differences. In addition, three major measurement campaigns were organized by EMEP between 1985 and 1991. Differences among results depend on the concentration level and methods used. The decrease in SO₂ concentrations over the last twenty years has placed greater demands on the methodology. Absorbing solutions methods for SO₂, (H₂O₂ and tetrachloromercurate (TCM)) typically have higher detection limits than the reference method, which uses KOH impregnated filters. The TCM method also has problems with negative interference, especially in summertime. UV fluorescence monitors have in a few cases proven to give good results, but interferences, detection limit and poor maintenance can be problems. For NO₂, many countries are using the TGS absorption solution method, which has a higher detection limit than the reference method using NaI impregnated glass sinters. The Salzmann method gives unreliable results at concentrations below 1 μgN/m³, and even at higher concentrations the uncertainty is rather unsatisfactory. The chemiluminescence monitor with molybdenum converters tends to systematically overestimate NO₂ concentrations, possibly because zero-drift problems and the non-specific response to NO₂. Particulate sulphate measurements in general have lower bias and uncertainties than gas and other aerosol measurements.
显示更多 [+] 显示较少 [-]