Application of ZnO–Fe₃O ₄ Nanocomposite on the Removal of Azo Dye from Aqueous Solutions: Kinetics and Equilibrium Studies
2014
Farrokhi, Mehrdad | Hosseini, Seyydeh-Cobra | Yang, Jae-Kyu | Shirzad-Siboni, Mehdi
In this study, zinc oxide was immobilized on magnetite nanoparticles by chemical method and it was used as an adsorbent to remove reactive black 5 (RB5) dye from aqueous solution. The removal efficiency of RB5 was studied as the function of adsorbent dosage, pH, initial RB5 concentration, H₂O₂, and ionic strength (sodium carbonate, sodium bicarbonate, sodium sulfate, and sodium chloride). Removal efficiency of RB5 by ZnO–Fe₃O₄ was greater than that by ZnO and Fe₃O₄ in similar conditions. Maximum adsorption of ZnO–Fe₃O₄ was obtained at neutral pH, and adsorption capacity was estimated to be 22.1 mg/g. Adsorption kinetic study revealed that the pseudo-second-order model better described the removal rate than the pseudo-first-order model. Adsorption isotherm was analyzed by both Langmuir and Freundlich equations, and results showed that it was better described by the Langmuir equation. The removal efficiency of RB5 was increased with increasing initial H₂O₂ concentrations from 2 to 5 mM but was decreased above 5 mM. The adsorption capacities of RB5 was increased in the presence of NaCl but was greatly decreased in the presence of bicarbonate, carbonate, and sulfate ion. Adsorption activity of RB5 by ZnO–Fe₃O₄ composite was maintained even after five successive cycles, suggesting a promising adsorbent for wastewater-contaminated organic dyes.
显示更多 [+] 显示较少 [-]