Photoluminescence investigations on alumina ceramic bearing couples tested under different angles of inclination in a Hip joint simulator
2006
Taddei, P. | Affatato, S. | Fagnano, C. | Toni, A.
Aseptic loosening due to wear and dislocation of the implant represents the main complication after total hip arthroplasty. To gain more insight into the influence of the implant position on wear, commercial alumina couplings have been tested in a hip joint simulator under three different angles of cup inclination (23°, 45°, 63°) with respect to a horizontal plane. The planned length of the test was ten million cycles. However, the test was stopped at 5.5 million cycles due to the fracture of one of the femoral heads, tested with at angle of 63°. The residual stress state in the worn acetabular cups and in the fractured femoral head were evaluated by the frequency shift and broadening of the R₁ and R₂ fluorescence bands due to the Cr³⁺ ions naturally present in alumina ceramics as trace impurities.The gravimetric measurements did not show significant differences among the three different inclinations tested, in agreement with previous simulator studies, but in disagreement with in vivo findings. The fluorescence measurements allowed to affirm that an angle of 63° represents a worsened mechanical condition for the prosthetic component, with a consequently higher probability of fracture and/or damage potentially conducive to massive wear. In the light of the fluorescence results, it did not appear surprising that the femoral head that fractured was the one being tested at 63°.
显示更多 [+] 显示较少 [-]