Catalytic microwave pyrolysis of oil palm fiber (OPF) for the biochar production
2017
Hossain, MdArafat | Ganesan, PooBalan | Sandaran, ShantiChandran | Rozali, ShaifulazuarBin | Krishnasamy, Sivakumar
Microwave pyrolysis of oil palm fiber (OPF) with three types of Na-based catalysts was experimentally investigated to produce biochar. Sodium hydroxide (NaOH), sodium chloride (NaCl), and sodium carbonate (Na₂CO₃) with purity 99.9% were selected for this investigation. Microwave muffle reactor (Model: HAMiab-C1500) with a microwave power controller including a microwave generator was used to perform the microwave pyrolysis. OPF particles were used after removing foreign materials, impurities, and dust. Microwave power ranges from 400 to 900 W, temperature ranges from 450 to 700 °C, and N₂ flow rates ranges from 200 to -1200 cm³/min were used along with all three Na-based catalysts for this investigation. Lower microwave power, temperature, and N₂ flow rate have been found favorable for higher yield of biochar. NaOH is to be found as the more suitable catalyst than NaCl and Na₂CO₃ to produce biochar. A maximum biochar yield (51.42 wt%) has been found by using the catalysts NaOH at N₂ flow rate of 200 cm³/min. One sample of the biochar (maximum yield without catalysts) was selected for further characterization via thermo gravimetric analysis (TGA), scanning electron microscopy (SEM), BET surface area, Fourier transform infrared spectroscopy (FTIR), and ultimate and proximate analysis. SEM and BET surface area analysis showed the presence of some pores in the biochar. High percentage of carbon (60.24 wt%) was also recorded in the sample biochar. The pores and high percentage of carbon of biochar have significant impact on soil fertilization by increasing the carbon sequestration in the soil. It assists to slow down the decomposition rate of nutrients from soil and therefore enhances the soil quality.
显示更多 [+] 显示较少 [-]