Reactive sintering of boron-doped Ni76Al24 intermetallic
2002
Moussa, S. O. | Morsi, K.
A preliminary investigation into the formation of boron-doped nickel-rich Ni₃Al with boron additions up to 2 wt% (i.e. to levels above the equilibrium solid solubility limit of boron in Ni₃Al) from elemental powders by reaction synthesis was carried out. The application of reaction synthesis was seen as a low-energy alternative to the production of Ni₃Al/boride composite suitable for wear applications. X-ray diffraction, Neutron diffraction, SEM/EDS,WDS, Image analysis, Archimedes principle and Rockwell hardness measurements; were used to study the effect of boron addition on the final microstructure, average grain size, bulk density and hardness of as-prepared Ni₇₆Al₂₄. Up to 0.3 wt% boron content, the microstructure consisted of single-phase Ni₃Al, however, at a boron content of 0.5 wt% an apparent transition from a single phase microstructure to a two-phase intermetallic/boride composite microstructure was observed, which dominated when the boron content increased, up to 2 wt%. The two-phase microstructure was identified as Ni₃Al (particles) within an Ni₄₁Al₅B₁₂ boride matrix, with no remaining un-reacted boron. The boron addition was found to increase the Rockwell hardness of Ni₃Al via two mechanisms. Below the solubility limit, the increase in hardness was due to solution hardening. Above 0.5 wt%B, solution hardening in addition to the formation of the harder boride phase, were found to amount to up to 50% increase in the hardness compared with boron free Ni₃Al. The extrusion of semi-molten beads at the surface of the compact at high B-content may be a limiting factor, in the formation of Ni₃Al/boride composites via this route.
显示更多 [+] 显示较少 [-]