Preparation of calcium oxalate--bromopyrogallol red inclusion sorbent and application to treatment of cationic dye and heavy metal wastewaters

Background, aim, and scope Dye pollutants are a major class of environmental contaminants. Over 100,000 dyes have been synthesized worldwide and more than 700,000 tons are produced annually and over 5% are discharged into aquatic environments. The adsorption or sorption is one of the most efficient methods to remove dye and heavy metal pollutants from wastewater. However, most of the present sorbents often bear some disadvantages, e.g. low sorption capacity, difficult separation of spoil, complex reproduction, or secondary pollution. Development of novel sorbents that can overcome these limitations is desirable. Materials and methods On the basis of the chemical coprecipitation of calcium oxalate (CaC₂O₄), bromopyrogallol red (BPR) was embedded during the growing of CaC₂O₄ particles. The ternary C₂O₄ ²⁻-BPR-Ca²⁺ sorbent was yielded by the centrifugation. Its composition was determined by spectrophotometry and AAS, and its structure and morphology were characterized by powder X-ray diffraction (XRD), laser particle-size analysis, and scanning electron microscopy (SEM). The adsorption of ethyl violet (EV) and heavy metals, e.g. Cu(II), Cd(II), Ni(II), Zn(II), and Pb(II) were carried out and their removal rate determined by spectrophotometry and ICP-OES. The adsorption performance of the sorbent was compared with powder activated carbon. The Langmuir isothermal model was applied to fit the embedment of BPR and adsorption of EV. Results The saturation number of BPR binding to CaC₂O₄ reached 0.0105 mol/mol and the adsorption constant of the complex was 4.70 x 10⁵ M⁻¹. Over 80% of the sorbent particles are between 0.7 and 1.02 μm, formed by the aggregation of the global CaC₂O₄/BPR inclusion grains of 30-50 nm size. Such a material was found to adsorb cationic dyes selectively and sensitively. Ethyl violet (EV) was used to investigate the adsorption mechanism of the material. One BPR molecule may just bind with one EV molecule. The CaC₂O₄/BPR inclusion material adsorbed EV over two times more efficiently than the activated carbon. The adsorption of EV on the CaC₂O₄/BPR inclusion sorbent was complete in only 5 min and the sedimentation complete in 1 h. However, those of EV onto activated carbon took more than 1.5 and 5 h, respectively. The treatment of methylene blue and malachite green dye wastewaters indicated that only 0.4% of the sorbent adsorbed over 80% of color substances. Besides, the material can also adsorb heavy metals by complexation with BPR. Over 90% of Pb²⁺, and approximately 50% of Cd²⁺ and Cu²⁺, were removed in a high Zn²⁺-electroplating wastewater when 3% of the material was added. Eighty-six percent of Cu²⁺, and 60% of Ni²⁺ and Cd²⁺, were removed in a high Cd²⁺-electroplating wastewater. Discussion The embedment of BPR into CaC₂O₄ particles responded to the Langmuir isothermal adsorption. As the affinity ligand of Ca²⁺, BPR with sulfonic groups may be adsorbed into the temporary electric double layer during the growing of CaC₂O₄ particles. Immediately, C₂O₄ ²⁻ captured the Ca²⁺ to form the CaC₂O₄ outer enclosed sphere. Thus, BPR may be released and embedded as a sandwich between CaC₂O₄ layers. The adsorption of EV on the sorbent obeyed the Langmuir isothermal equation and adsorption is mainly due to the ion-pair attraction between EV and BPR. Different from the inclusion sorbent, the activated carbon depended on the specific surface area to adsorb organic substances. Therefore, the adsorption capacity, equilibrium, and sedimentation time of the sorbent are much better than activated carbon. The interaction of heavy metals with the inclusion sorbent responded to their coordination. Conclusions By characterizing the C₂O₄ ²⁻-BPR-Ca²⁺ inclusion material using various modern instruments, the ternary in situ embedment particle, [(CaC₂O₄)₉₅(BPR)] n ²n⁻, an electronegative, micron-sized adsorbent was synthesized. It is selective, rapid, and highly effective for adsorbing cationic dyes and heavy metals. Moreover, the adsorption is hardly subject to the impact of electrolytes. Recommendations and perspectives The present work provides a simple and valuable method for preparing the highly effective adsorbent. If a concentrated BPR wastewater was reused as the inclusion reactant, the sorbent will be low cost. By selecting the inclusion ligand with a special structure, we may prepare some particular functional materials to recover the valuable substances from seriously polluted wastewaters. The recommended method will play a significant role in development of advanced adsorption materials.