Comparison of nickel adsorption on biochars produced from mixed softwood and Miscanthus straw
2018
Shen, Zhengtao | Zhang, Yunhui | Jin, Fei | Alessi, Daniel S. | Zhang, Yiyun | Wang, Fei | McMillan, Oliver | Al-Tabbaa, Abir
In order to understand the influence of feedstock type on biochar adsorption of heavy metals, the adsorption characteristics of nickel (Ni²⁺), copper (Cu²⁺) and lead (Pb²⁺) onto biochars derived from mixed softwood and Miscanthus straw were compared. The biochars were produced from mixed softwood pellets (SWP) and Miscanthus straw pellets (MSP), at both 550 and 700 °C for each material, using a standardised production procedure recommended by the UK Biochar Research Centre. Kinetics analyses show that the adsorption of Ni²⁺ to all four biochars reached equilibrium within 5 min. The degree of Ni²⁺ removal for all four biochars remained nearly constant within initial pH values of 3–8, because the equilibrium pH values within this range were similar due to the buffering effect of the biochars. A sharp increase of Ni²⁺ removal percentage for all biochars at initial solution pH 8–10 was observed as the equilibrium pH also increased. MSP derived biochars generally had higher maximum adsorption capacities (Qₘₐₓ) for the three tested metals as compared with those from SWP, which was likely due to their higher degree of carbonisation during production. This study shows that feedstock type is a primary factor affecting the adsorption capacities of the tested biochars for heavy metals.
显示更多 [+] 显示较少 [-]