Numerical and experimental investigation of the indoor air quality and thermal comfort performance of a low energy cooling windcatcher with heat pipes and extended surfaces
2020
Calautit, John Kaiser | Tien, Paige Wenbin | Wei, Shuangyu | Calautit, Katrina | Hughes, Ben
This work builds on previous experience in windcatcher design, maximising the ventilation rate of the windcatcher, whilst integrating low energy cooling technologies. The present study aims to investigate the thermal comfort and indoor air quality in buildings ventilated with a passive cooling windcatcher integrated with heat pipes and extended surface using numerical modelling, wind tunnel and far-field testing in the UAE during a summer month. Results of the scaled wind tunnel tests showed that the addition of the heat pipes and extended surfaces reduced the airflow through the windcatcher but did not impede the flow even at low outdoor wind speeds, this was further confirmed by the smoke visualisation tests. Analysis of pollutant concentration in the building model showed that the proposed windcatcher configuration was capable of delivering fresh air at a sufficient rate to lower CO2 concentration levels below the recommended guidelines for air quality. The thermal comfort analysis was conducted and it was observed that for the present design, equal distribution of thermal comfort was not achieved due to combination of high air movement, colder temperature and high humidity below the windcatcher which resulted in higher thermal discomfort in this area. Further work is required to develop a suitable control strategy in the form of volume control dampers which would enable the supply flowrate to be monitored and altered as required and optimized the distribution in the occupied space. Field tests data was used to validate the numerical modelling, showing good agreement between both methods.
显示更多 [+] 显示较少 [-]