Effect of thermostable α‐amylase injection on mechanical and physiochemical properties for saccharification of extruded corn starch
2014
Myat, Lin | Ryu, Gi‐Hyung
BACKGROUND: In industry, a jet cooker is used to gelatinize starch by mixing the starch slurry with steam under pressure at 100–175 °C. A higher degree of starch hydrolysis in an extruder is possible with glucoamylase. Unfortunately, it is difficult to carry out liquefaction and saccharification in parallel, because the temperature of gelatinization will be too high and will inactivate glucoamylase. Since the temperature for liquefaction and saccharification is different, it is hard to change the temperature from high (required for liquefaction) to low (required for saccharification). The industrial gelatinization process is usually carried out with 30–35% (w/w) dry solids starch slurry. Conventional jet cookers cannot be used any more at high substrate concentrations owing to higher viscosity. In this study, therefore, corn starch was extruded at different melt temperatures to overcome these limitations and to produce the highest enzyme‐accessible starch extrudates. RESULTS: Significant effects on physical properties (water solubility index, water absorption index and color) and chemical properties (reducing sugar and % increase in reducing sugar after saccharification) were achieved by addition of thermostable α‐amylase at melt temperatures of 115 and 135 °C. However, there was no significant effect on % increase in reducing sugar of extruded corn starch at 95 °C. CONCLUSION: The results show the great potential of extrusion with thermostable α‐amylase injection at 115 and 135 °C as an effective pretreatment for breaking down starch granules, because of the significant increase (P < 0.05) in % reducing sugar and enzyme‐accessible extrudates for saccharification yield. © 2013 Society of Chemical Industry
显示更多 [+] 显示较少 [-]