Addition of Polyurethane Foam Waste to Polymeric Diphenyl Methane Diisocyanate to Improve Plywood Binder Performance
2020
Li, Qi | Pang, Yanfang | Liu, Xiaosheng | Xi, Enhua | Mao, An | Wan, Hui
The objective of this study was to investigate the feasibility of using polyurethane (PU) foam waste obtained from automobile shredder residue (ASR) in plywood production. The PU foam waste from ASR was cleaned by water and acetone, ground into powder, dried, and mixed with polymeric diphenyl methane diisocyanate (pMDI) resin at various ratios (2.5%, 5%, 7.5%, and 10%, based on the weight of pMDI). The mixed adhesives were examined with Fourier-transform infrared spectroscopy (FTIR) and thermogravimetric (TG) analysis, and evaluated as plywood binders (measured in accordance with Chinese National Standard GB/T 17657-2013). The results indicated that the addition of PU powder into pMDI resin increased adhesive viscosity and efficiency, and also helped solve the problem of deficiency of pMDI on the veneer surface. FTIR results showed various reactions between pMDI and PU powder. This potential cross-linking might contribute to the cohesive strength of the cured adhesive. TG analysis results showed the possible increased thermal stability of the cured mixed adhesive at a temperature range of 150°C to 300°C. The best PU addition ratio was 7.5 percent of the pMDI weight, considering both the bond strength and production practice of plywood. Plywood testing showed that both the dry and wet bond strength reached the peak value at the optimal mixing ratio. The use of PU powder in plywood manufacturing provided a possible way of recycling PU foam waste while improving or maintaining the performance of plywood.
显示更多 [+] 显示较少 [-]